journal article·2015-03

Influence of CeO2 layer thickness on the properties of CeO2/Gd2O3 multilayers prepared by pulsed laser deposition

Maneesha Mishra, P. Kuppusami, V.R. Reddy, C. Ghosh, R. Divakar, R. Ramaseshan, Akash Singh, R. Thirumurugesan, E. Mohandas

Vacuum· Volume 113
Publisher page

Abstract

Abstract CeO2/Gd2O3 multilayers were prepared on Si (100), quartz and inconel-783 substrates by pulsed laser deposition technique at an oxygen partial pressure of 2 Pa and substrate temperatures of 300 and 873 K. The layer thickness of CeO2 was varied from 5 to 30 nm, whereas Gd2O3 layer thickness was kept constant (∼10 nm). The phase and crystallite size of the films were characterized by X-ray diffraction (XRD), X-ray reflectivity (XRR), Raman spectroscopy, atomic force microscopy (AFM) and high resolution transmission electron microscopy (HRTEM) techniques. The layer thicknesses, measured by XRR as well as from HRTEM micrographs were in good agreement with each other. The CeO2/Gd2O3 multilayers show transmittance of ∼70%. Nanoindentation measurements indicated that the hardness values of the multilayers were higher than that of single layers of CeO2 and Gd2O3 thin films.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Catalytic Processes in Materials Science · Diamond and Carbon-based Materials Research · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Characterization of Al2O3/ZrO2 nano multilayer thin films prepared by pulsed laser deposition10.1016/j.matchemphys.2012.01.027 ↗
2. Thermal stability of CeO2/ZrO2 multilayer thin films prepared by pulsed laser deposition
3. Stabilization of tetragonal and cubic phases of ZrO2 in pulsed sputter deposited ZrO2/Al2O3 and ZrO2/Y2O3 nanolayered thin films10.1063/1.3040720 ↗
4. Study of ZrO2/Al2O3 multilayers10.1016/S0042-207X(01)00311-6 ↗
5. CVD deposition and characterization of coloured Al2O3/ZrO2multilayers10.1016/j.surfcoat.2006.08.035 ↗
6. Synthesis, structure, microstructure and mechanical characteristics of MOCVD deposited zirconia films10.1016/j.apsusc.2006.10.025 ↗
7. On the size-dependent phase transformation in nanoparticulate zirconia10.1016/S0921-5093(00)00625-0 ↗
8. Design of multilayer extreme-ultraviolet mirrors for enhanced reflectivity10.1364/AO.39.002189 ↗
9. UV protection filters by dielectric multilayer thin films on glass BK-7 and infrasil 30110.1016/j.apsusc.2005.12.077 ↗
10. Study of normal incidence of three-component multilayer mirrors in the range 20–40 nm10.1364/AO.44.000384 ↗
11. On-blaze operation of a Mo/Si multilayer-coated, concave diffraction grating in the 136–142-Å wavelength region and near normal incidence10.1364/AO.32.004890 ↗
12. Size effects in materials due to microstructural and dimensional constraints: a comparative review10.1016/S1359-6454(98)00231-6 ↗
13. Nanometer scale multilayered hard coatings10.1016/S0042-207X(99)00148-7 ↗
14. Growth of single-crystal TiN/VN strained-layer superlattices with extremely high mechanical hardness10.1063/1.339770 ↗
15. Microstructure and nanoindentation hardness of Ag/Fe multilayers10.1016/S1003-6326(09)60105-9 ↗
16. Analysis of interfacial strengthening from composite hardness of TiN/VN and TiN/NbN multilayer hard coatings10.1016/j.surfcoat.2004.01.011 ↗
17. Coherent growth and mechanical properties of AlN/VN multilayers10.1063/1.1630367 ↗
18. Physical, chemical and electrochemical properties of pure and doped ceria10.1016/S0167-2738(99)00318-5 ↗
19. Thermodynamics of rare earth sesquioxides10.1016/j.pmatsci.2006.09.002 ↗
20. Gd2O3, Ga2O3 (Gd2O3), Y2O3, andGa2O3, as high-k gate dielectrics on SiGe: a comparative study10.1063/1.1405134 ↗
21. Martienssen · 2005 · 437
22. High-temperature thermal-expansion studies of pure UO2, Gd2O3 and of UO2-1.5 WO Gd2O3 solid solution
23. Dielectric properties of ceria and yttria-stabilized zirconia thin films grown on silicon substrates10.1016/S0167-2738(00)00285-X ↗
24. UV highly absorbent coatings with CeO2 and TiO210.1016/0022-3093(90)90150-K ↗
25. Catalytic properties of ceria and CeO2-containing materials10.1080/01614949608006464 ↗
26. Characterization and corrosion studies of ceria thin film based on fluorinated AZ91D magnesium alloy10.1016/j.corsci.2008.05.016 ↗
27. Sol–gel derived nanoporous cerium oxide film for application to cholesterol biosensor10.1016/j.elecom.2008.06.003 ↗
28. Nanocrystalline undoped ceria oxygen sensor10.1016/S0925-4005(03)00407-6 ↗
29. Nanoporous cerium oxide thin film for glucose biosensor10.1016/j.bios.2008.10.032 ↗
30. Electrical properties of ceria-based oxides and their application to solid oxide fuel cells10.1016/0167-2738(92)90102-U ↗
31. Electrical properties of gadolinia-doped ceria thin films deposited by sputtering in view of SOFC application10.1007/s10008-004-0503-3 ↗
32. XPS, XRD and SEM characterization of a thin ceria layer deposited onto graphite electrode for application in lithium-ion batteries10.1016/j.apsusc.2011.05.108 ↗
33. The VCNR properties of nano-structured ceria thin films10.1016/S0038-1098(02)00503-3 ↗
34. Synthesis and properties of cerium and titanium oxide thin coatings for corrosion protection of 304 stainless steel10.1023/A:1018381503008 ↗
35. Solid oxide fuel cells (SOFCs): a review of an environmentally clean and efficient source of energy10.1016/S1364-0321(02)00014-X ↗
36. High temperature moiré interferometry investigation of creep crack growth of inconel 783—environment and β-phase effects10.1016/S0921-5093(02)00594-4 ↗
37. Effect of substrate temperature and oxygen partial pressure on microstructure and optical properties of pulsed laser deposited yttrium oxide thin films10.1016/j.apsusc.2011.03.156 ↗
38. Phase evolution in zirconia thin films prepared by pulsed laser deposition10.1016/j.apsusc.2012.01.160 ↗
39. Surface studies of solids by total reflection of X-rays10.1103/PhysRev.95.359 ↗
40. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
41. Micromechanical estimation of composite hardness using nanoindentation technique for thin-film coated system10.1016/S0921-5093(00)00696-1 ↗
42. On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behavior10.1016/S0043-1648(00)00488-9 ↗
43. A study of microstructural and optical properties of nanocrystalline ceria thin films prepared by pulsed laser deposition10.1016/j.tsf.2010.12.013 ↗
44. Raman study of CeO2. Second-order scattering, lattice dynamics, and particle-size effects10.1103/PhysRevB.48.178 ↗
45. Study of the Raman spectrum of CeO2 nanometer thin films10.1016/S0254-0584(00)00357-6 ↗
46. Waveguide Raman spectroscopy of sol–gel Gd2O3 thin films10.1002/jrs.980 ↗
47. Atomistic processes in the early stages of thin-film growth10.1126/science.276.5311.377 ↗
48. Structural and optical properties of polycrystalline thin films of rare earth oxides grown on fused quartz by low pressure MOCVD10.1016/j.jcrysgro.2004.11.325 ↗
49. Synthesis and characterization of hardness-enhanced multilayer oxide films for high-temperature applications10.1016/j.surfcoat.2008.04.053 ↗
50. A Raman-scattering study on the interface structure of nanolayered TiAlN/TiN and TiN/NbN multilayer thin films grown by reactive dc magnetron sputtering10.1063/1.1946193 ↗
51. Structure transformations and super hardness effects in V/Ti nanostructured multilayers10.1063/1.1500435 ↗
52. Evaluating modulus and hardness enhancement in evaporated Cu/W multilayers10.1016/j.actamat.2006.07.043 ↗
53. Model of superlattice yield stress and hardness enhancements10.1063/1.359467 ↗
54. PACVD TiN/Ti–B–N multilayers: from micro- to nano-scale10.1016/j.surfcoat.2003.09.025 ↗
55. The TiN/AlN multilayers deposited by filtered vacuum arc deposition10.1016/S0168-583X(03)00767-5 ↗