Helium bubble formation in YAG laser weldment of helium-implanted stainless steel
Source abstract
Abstract
Abstract The helium bubble formation in YAG laser weldment of helium-implanted austenitic stainless steel was investigated. The helium ion implantation was carried out at the acceleration voltage from 2 to 6 MeV using an implantation apparatus. After the welding, helium bubbles were observed at the bond region, heat-affected zone and weld metal. The increase in the laser power caused the growth of helium bubble along the dendrite cell boundary in the weld metal. A cross bead welding was performed for repair welding after the helium implantation. The helium bubble formation was also observed at the interface between the first and the second bead. It has been shown that the helium bubble formation in the weld metal and in the heat-affected zone during repair welding can be reproduced through the helium-implanting technique.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Fusion materials and technologies · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. Kanne · Weld J · 1988 · 33
2. Goods · Metall Trans · 1992 · 23A · 102110.1007/BF02675577 ↗
3. Kramer · J Nucl Mater · 1968 · 25 · 12110.1016/0022-3115(68)90038-X ↗
4. Lin · Metall Trans · 1990 · 21A · 258510.1007/BF02647004 ↗
5. Franco-Ferreira · Weld J · 1992 · 43
6. Kuroda · Trans JWRI · 1995 · 24-1 · 69
7. Kuroda · Quart J Jpn Welding Soc · 1998 · 164 · 50310.2207/qjjws.16.503 ↗
8. Lindhord · Mat Fyz Medd · 1968 · 36
9. Biersack · Nucl Instr and Meth · 1980 · 174 · 25710.1016/0029-554X(80)90440-1 ↗