journal article·2004-04

Application of high-power plasma gun for thermal cycle testing of refractory foams

Shahram Sharafat, Akira Kobayashi, Nasr M. Ghoniem

Vacuum· Volume 73· Issue 3-4
Publisher page

Abstract

Abstract A high-power hollow-cathode plasma-gun was utilized to perform durability tests of advanced silicon carbide (SiC) foam materials under extreme thermal cyclic loading conditions. SiC-foam is a primary candidate for in-cylinder thermal regenerators in diesel engines. The SiC regenerator would be exposed to rapid thermal cycling by alternating hot (∼700°C) and cold (∼50°C) gases with cycling rates ranging between 3 and 50 Hz and with flow rates of 0.1–0.3 l/cycle at gas pressures between 1 and 2 atm. Simulation of these conditions outside a combustion engine would require an elaborate experimental setup capable of alternating flow between hot and cold gas reservoirs. Furthermore, a high-temperature rapid gas flow switching system would have to be developed. Instead, a high power plasma gun was used to deliver the required hot working gas at a flow rate of 60 l/min and at a pressure of ∼2 atm. Instead of an elaborate gas flow switching system an electrically driven open flathead engine was used to alternate between the cold and hot gases at frequencies of up to 5 Hz. The plasma gun was found to be a highly economical system for delivering hot argon gases at necessary flow rates of 0.25 l/cycle. A description of the experimental setup using the high-power plasma gun is given and representative results of the SiC-foam thermal cycling performance are reported.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Material Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. Arata Y, Kobayashi A, Habara Y. Gas tunnel type plasma spraying apparatus. Transactions of the Joining and Welding Research Institute (JWRI), vol. 15. Osaka University, Japan; 1986. p. 227–31.
2. Brindley WJ. Thermal barrier coating workshop. Proceedings of a Conference held at NASA Lewis Research Center, Cleveland, Ohio: NASA Conference Publication 3312; March 27–29, 1995.
3. Berndt, Christopher C. Thermal spray: a united forum for scientific and technological advances. Proceedings of the First United Thermal Spray Conference, Indianapolis, IN, Materials Park, OH: ASM International; September 15–18, 1997 (A98-30276 07-31), 1998.
4. Guan P, Hayashi N, Satoh S, Yamabe Chobei. NOx treatment by DC streamer corona discharge with series gap. Vacuum 2002;65:469–74.10.1016/S0042-207X(01)00458-4 ↗
5. Treatment of CO2 gas by high-energy type plasma10.1016/S0042-207X(01)00459-6 ↗
6. Plasma source development for the qualification of thermal protection materials for atmospheric entry vehicles at IRS10.1016/S0042-207X(01)00429-8 ↗
7. Compact plasmatron-boosted hydrogen generation technology for vehicular applications10.1016/S0360-3199(98)00013-5 ↗
8. Kobayashi A. Development of high temperature multi-purpose testing furnace using gas tunnel type plasma jet. Transactions of the Joining and Welding Research Institute (JWRI), vol. 24(2). Osaka University, Japan; 1995. p. 45–9.
9. Sharafat S, Ghoniem N, Chen A. Mechanical fatigue of ceramic foams. University of California Los Angeles report, UCLA-MATMOD-97-3, December, 1997.