The Ka-band high power klystron amplifier design program of INFN
Source abstract
Abstract
In the framework of the “Compact Light XLS” project, a short ultra-high gradient linearizer working on the third harmonic of the main linac frequency is requested. Increasing gradients and reducing dimensions are requirements for XLS and all next generation linear accelerators. Actually, ultracompact normal conducting accelerating structures, operating in the Ka-band regime ranging from 100 to 150 MV/m are required to achieve ultra-high gradients for research, industrial and medical applications. To fulfill these strong requirements, the R&D of a proper Ka-band klystron with RF power output and a high efficiency is mandatory. This contribution reports the design of a possible klystron amplifier tube operating on the TM010 mode at 36 GHz, the third harmonic of the 12 GHz linac frequency, with an efficiency of 42% and a 20 MW RF power output. This contribution discusses also the high-power DC gun, the beam focusing channel and the RF beam dynamics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gyrotron and Vacuum Electronics Research · Particle accelerators and beam dynamics · Microwave Engineering and Waveguides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Innovative compact braze-free accelerating cavity10.1088/1748-0221/13/09/P09017 ↗
2. Materials and technological processes for high-Gradient accelerating structures: new results from mechanical tests of an innovative braze-free cavity10.1088/1748-0221/15/01/P01029 ↗
3. B. Spataro, et al. High gradient RF tests of welded X-band accelerating structure, Manuscript in PRAB, submitted for publication.
4. Experimental demonstration of externally driven millimeter-wave particle accelerator structure10.1063/5.0011397 ↗
5. Next generation high brightness electron beams from ultrahigh field cryogenic rf photocathode sources10.1103/PhysRevAccelBeams.22.023403 ↗
6. An ultra-compact x-ray free-electron laser10.1088/1367-2630/abb16c ↗
7. http://www.compactlight.eu/Main/HomePage.
8. Caryotakis · 2004 · 139
9. The design and performance of a 150-MW klystron at S band10.1109/TPS.1985.4316471 ↗
10. Design of a 100 MW X-band klystron
11. Fazio · 2000
12. Chang · 2019
13. Limitations on area compression of beams from pierce guns10.1063/1.59021 ↗
14. EuPRAXIA SPARC-LAB design study towards a compact FEL facility at LNF10.1016/j.nima.2018.01.094 ↗
15. Active quasioptical Ka-band rf pulse compressor switched by a diffraction grating10.1103/PhysRevSTAB.12.093501 ↗
16. Active microwave pulse compressor using an electron-beam triggered switch10.1103/PhysRevLett.110.115002 ↗
17. 2018
18. Initial design of a high-power Ka-band klystron10.1088/1742-6596/1596/1/012023 ↗
19. Limitations on area compression of beams from pierce guns10.1063/1.59021 ↗
20. Caryotakis · 2004 · 139
21. Behtouei · 2020
22. Behtouei · 2019
23. Commissioning of the 34-GHz, 45-MW pulsed magnicon10.1109/TPS.2004.830539 ↗
24. X. Chang, et al. Ka-band high power harmonic amplifier for bunch phase-space linearization, in: North American Particle Accelerator Conf., NAPAC’19, 2019.
25. Klyc: 1.5-d large-signal simulation code for klystrons10.1109/TPS.2019.2904125 ↗
26. Developing sheet beam klystron simulation capability in AJDISK10.1109/TED.2014.2298753 ↗
27. A Ka-band linearizer TW accelerating structure for the Compact Light XLS project10.1088/1742-6596/1596/1/012021 ↗
28. New analytical derivation of group velocity in TW accelerating structures
29. A SW Ka-band linearizer structure with minimum surface electric field for the compact light XLS project10.1016/j.nima.2020.164653 ↗
30. Traveling-wave accelerating test structure at 34.3 GHz
31. A. Variola, private communication.