journal article·2018-02

Investigations of the thermo-mechanical stability of hybrid layers for tribological applications: Nitrided layer/CrCN coating system

Piotr Myśliński, Łukasz Szparaga, Adam Gilewicz, Katarzyna Mydłowska, Anna Piątkowska

Vacuum· Volume 148
Publisher page

Abstract

Abstract The paper contains a description of investigations related to an analysis of thermo-mechanical couplings in nitrided and non-nitrided steel substrate/CrCN coating systems with the use of dilatometry with temperature modulation. In this method, measured quantities are changes in the linear elongation of substrates in layered systems that occur as a result of given thermal loads. This enable i.a. to assess thermally activated changes in the states of residual stresses in the system as a result of a number of physical and chemical processes in the coating and in the substrate. Independently, results of these investigations were confronted with the results of scratch test enabling the assessment of coating adhesion and fracture toughness. On the grounds of the investigations carried out, it was found that CrCN coatings deposited on the nitrided substrates demonstrate a stronger thermo-mechanical coupling with the substrate in comparison with coatings deposited on the non-nitrided substrate and are characterized by a higher thermal stability. The results obtained explicitly confirm that systems with nitrided substrates are characterized by a higher mechanical load-bearing capacity and more favorable state of the adhesion of the coating to the substrate is observed as compared to systems with non-nitrided substrates.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Plasma nitriding behavior of Ti6Al4V orthopedic alloy10.1016/j.surfcoat.2007.08.004 ↗
2. The influence of chemical groups on the mechanical properties of SiCNH coatings deposited on 7075 aluminum alloy10.1016/j.tsf.2013.01.055 ↗
3. Plasmochemical modification of aluminum-zinc alloys using NH3-Ar atmosphere with anti-wear coatings deposition10.1016/j.matchemphys.2016.12.046 ↗
4. Modulated-temperature thermomechanical analysis10.1016/S0040-6031(00)00360-9 ↗
5. Theory and applications of modulated temperature programming to thermomechanical techniques10.1023/A:1011574104978 ↗
6. Myśliński · 2011
7. Review of the thermal and mechanical stability of TiN-based thin films
8. Thermal stability of nitride thin films10.1016/S0042-207X(00)00143-3 ↗
9. The influence of thermal annealing on residual stresses and mechanical properties of arc-evaporated TiCxN1-x (x=0, 0.15 and 0.45) thin films10.1016/S1359-6454(02)00365-8 ↗
10. Investigation of the thermal stability of hard coatings by Modulated Temperature Dilatometry10.1016/j.vacuum.2008.05.006 ↗
11. Application of dilatometry with modulated temperature for thermomechanical analysis of anti-wear coating/substrate systems10.1007/s10973-015-4552-x ↗
12. Temperature modulation in dilatometric investigation of PVD substrate-coating systems10.1088/1742-6596/564/1/012005 ↗
13. Investigations of rheological properties of nitrided steels using thermodilatometric method with temperature modulation10.1007/s10973-016-5405-y ↗
14. Characterization of the ceramic coating of iron with TiN by temperature-modulated dilatometry10.1016/S0040-6031(02)00101-6 ↗
15. Design, control and in situ visualization of gas nitriding processes10.3390/s100100218 ↗
16. Modelling of the nitriding process10.1016/j.jmatprotec.2007.04.133 ↗
17. Arc-evaporated CrN, CrN and CrCN coatings10.1016/j.vacuum.2008.05.005 ↗
18. An analysis of macroparticle-related defects on CrCN and CrN coatings in dependence of the substrate bias voltage10.1016/j.vacuum.2011.04.023 ↗
19. Effect of substrate bias voltage on the properties of CrCN and CrN coatings deposited by cathodic arc evaporation10.1016/j.vacuum.2012.04.039 ↗
20. Irreversing thermal expansivity of materials coated with adhesive thin films detected by modulated-temperature dilatometry and differential thermal analysis10.1016/S0040-6031(01)00835-8 ↗
21. The use of modulated temperature programs in thermal methods10.1023/A:1011568509096 ↗
22. Raveh · Surf. Coat. Tech. · 2007 · 201 · 613610.1016/j.surfcoat.2006.08.131 ↗
23. Analysis of thermal stability of CrCN coatings deposited on nitrided substrates using modulated temperature thermodilatometry10.1515/amm-2017-0115 ↗
24. A possibility of application of MTDIL to the residual stresses analysis: the hard coating-substrate system10.1023/B:JTAN.0000033210.69839.5e ↗
25. Celebrating the 100th anniversary of the Stoney equation for film stress: developments from polycrystalline steel strips to single crystal silicon wafers10.1016/j.tsf.2008.07.014 ↗
26. Analysis of the effect of antiwear CrN coating thickness on the evolution of thermomechanical interactions in the substrate/PVD coating system10.1007/s10973-016-5588-2 ↗
27. Size effect of thermal expansion and thermal/intrinsic stresses in nanostructured thin films: experiment and model10.1016/j.actamat.2011.07.018 ↗
28. Microstructural design of hard coatings10.1016/j.pmatsci.2006.02.002 ↗