journal article·2017-04

In situ assessment of the roughness of a uniformly eroded cylindrical magnetron target

Muhammad Arif, Thomas Ernstbrunner, C. Eisenmenger-Sittner

Vacuum· Volume 138
Publisher page

Abstract

Abstract We present an experimental approach for the in situ characterization of the surface roughness of an eroded magnetron target based on the reflectance pattern of a laser beam. The surface of the eroded region was modeled as a random arrangement of tilted plane facets with large surface extensions as compared to the wavelength of the laser. A simple algorithm was used to reconstruct surface profiles form the reflected intensity values from the eroded surface. The surface profiles of Al, Cu and Ti targets were reconstructed under high vacuum conditions without disturbing the processing parameters of the magnetron sputtering plant. From these generated profiles, the roughness parameters, root mean square roughness, correlation length, skewness and kurtosis of different target materials were calculated by this in situ technique. The results measured with this in situ technique are in good agreement with comparable measurements using a mechanical profilometer outside the sputtering system. However, some deviation was observed for surfaces with higher roughness and mean tilt angles. This method can be used for in situ monitoring of sputter targets to extract the surface features which may correlate with thin film properties and may precede dangerous events like target melting or other catastrophic failures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Roughness and Optical Measurements · Advanced Measurement and Metrology Techniques · Adhesion, Friction, and Surface Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Thirty years of rotatable magnetrons10.1016/j.tsf.2012.04.065 ↗
2. Thomas · 1999
3. Rapid optical measurement of surfaces10.1016/0890-6955(94)P2363-K ↗
4. Roughness measurement by confocal microscopy for brightness characterization and surface waviness visibility evaluation10.1016/S0043-1648(96)07240-7 ↗
5. Digital measurement of surface profiles by automated optical sectioning10.1088/0957-0233/5/6/011 ↗
6. Roughness measurement with a laser scanning analyser10.1016/0043-1648(79)90144-3 ↗
7. In-process measurement of surface roughness using light scattering10.1016/S0043-1648(97)00279-2 ↗
8. Development of a laser-scattering-based probe for on-line measurement of surface roughness10.1364/AO.42.001318 ↗
9. Theory for off–specular reflection from roughened surfaces10.1364/JOSA.57.001105 ↗
10. Generalization of the lambertian model and implications for machine vision10.1007/BF01679684 ↗
11. Surface roughness measurement with speckle intensity distribution using a linear image sensor10.1143/JJAP.21.L743 ↗
12. Half-width of intensity profiles of light scattered from self-affine fractal random surfaces and simulational verifications10.1103/PhysRevE.65.061104 ↗
13. The properties of random surfaces of significance in their contact10.1098/rspa.1970.0068 ↗
14. Rough surfaces, gaussian or exponential statistics10.1088/0022-3727/22/9/001 ↗