Effect of specimen geometry on fracture toughness measurement of plasma-sprayed ceramic coatings by the tapered double cantilever beam approach
Source abstract
Abstract
Abstract The measurement of fracture toughness of plasma-sprayed ceramic coatings is usually performed using a standard double cantilever beam approach. The design of specimen geometry using a tapered double cantilever beam (TDCB) approach makes the compliance of specimens be linearly proportional to crack length. Fracture toughness in terms of critical strain energy release rate can be obtained by measuring fracture load only. Three varieties of the TDCB specimens are used to examine the effect of the geometry and size of specimens on the results. These are simple TDCB, modified and long TDCBs. Plasma-sprayed Al 2 O 3 coatings are used in test. It was found that linearly proportional relations are experimentally obtained between the compliance of the specimen and crack length for all three varieties of the TDCB samples. Fracture toughness of plasma-sprayed Al 2 O 3 coating is independent on the geometry of the test piece used in the study. The TDCB approach is a simple and reliable approach to measure fracture toughness of thermal spray coatings without the measurement of crack length.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Numerical methods in engineering · Erosion and Abrasive Machining
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Ostojic · Mater Forum · 1987 · 10 · 247
2. Sharafat · Vacuum · 2000 · 59 · 18510.1016/S0042-207X(00)00269-4 ↗
3. Kobayashi · Vacuum · 2000 · 59 · 19410.1016/S0042-207X(00)00270-0 ↗
4. Callus · Surf Coat Technol · 1999 · 114 · 11410.1016/S0257-8972(99)00018-3 ↗
5. Petzow G, Suga T, Elssner G, Turwitt M. Proceedings of the 3rd International School on Sintered Materials, New Delhi, India, Dec. 1983. Amsterdam, Netherlands: Elsevier; 1984.
6. Ostojic · J Am Ceram Soc · 1988 · 71 · 89110.1111/j.1151-2916.1988.tb07542.x ↗
7. Berndt CC, McPherson R. Proceedings of the 9th International Thermal Spraying Conference, The Hague, Netherlands, May 19–23, 1980, The Hague, Netherlands: Nederlands Institute voor Lastechniek; 1980. p. 310–6.
8. Mostovoy · J Mater · 1967 · 2 · 661
9. Berndt CC, Ostojic P. Proceedings of the International Symposium on Advanced Thermal Spraying Technology and Allied Coatings, Osaka University, Japan, Japan High Temperature Society, 1988: 191–7.
10. Heintze · Surf Coat Technol · 1988 · 34 · 1510.1016/0257-8972(88)90084-9 ↗
11. Heintze · Surf Coat Technol · 1988 · 36 · 12510.1016/0257-8972(88)90142-9 ↗
12. Li · J Am Ceram Soc · 2003 · 86 · 143110.1111/j.1151-2916.2003.tb03491.x ↗
13. Li CJ, Wang WZ, He Y.J Thermal Spray Technol 2004, in press.
14. Irwin · J Appl Mech · 1957 · 24 · 36110.1115/1.4011547 ↗
15. Ohmori · Thin Solid Films · 1991 · 201 · 24110.1016/0040-6090(91)90114-D ↗
16. McPherson · Thin Solid Films · 1982 · 97 · 20110.1016/0040-6090(82)90453-9 ↗
17. Ohmori · Trans Jpn Weld Res Inst · 1990 · 19 · 259
18. Li · J Thermal Spray Technol · 2002 · 11 · 36510.1361/105996302770348754 ↗
19. Simpson LA. In: Bradt RC, et al., editors. Fracture mechanics. New York: Plenum; 1974.
20. Li · J Mater Sci · 1997 · 32 · 99710.1023/A:1018574221589 ↗