journal article·2004-06

Etching mechanism of (Pb,Sr)TiO3 thin films for DRAM application using Cl2/Ar inductively coupled plasma

Gwan-Ha Kim, Kyoung-Tae Kim, Dong-Pyo Kim, Chang-Il Kim

Vacuum· Volume 74· Issue 3-4
Publisher page

Abstract

Abstract Etching characteristics of (Pb,Sr)TiO 3 (PST) thin films were investigated using inductively coupled chlorine-based plasma system as functions of gas mixing ratio, radio frequency power and direct current bias voltage. It was found that the increasing of Ar content in gas mixture lead to sufficient increasing of etch rate and selectivity of PST to Pt. The maximum etch rate of PST film is 56.2 nm/min and the selectivity of PST to Pt is 0.8 at Cl 2 /(Cl 2 +Ar) of 0.2. It was proposed that sputter etching is dominant etching mechanism while the contribution of chemical reaction is relatively low due to low volatility of etching products.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Ferroelectric and Piezoelectric Materials · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (7)

Show source-provided references
1. Nagaraj · J Appl Phys Lett · 1999 · 74 · 319410.1063/1.124104 ↗
2. Hwang · J Appl Phys Lett · 1995 · 67 · 281910.1063/1.114795 ↗
3. Kim · J Vac Sci Technol · 2000 · B18 · 21610.1116/1.591175 ↗
4. Chung · Thin Solid Film · 2001 · 394 · 21310.1016/S0040-6090(01)01015-X ↗
5. Kang · Mater Res Bull · 2001 · 36 · 26510.1016/S0025-5408(01)00511-6 ↗
6. Chung · J Vac Sci Technol · 2001 · B19 · 27510.1116/1.1333082 ↗
7. Lide DR. CRC handbook of chemistry and physics. Washington DC: CRC Press LLC, 1998. p. 4–66.