Plasma source low-energy ion-enhanced deposition of thin films
Source abstract
Abstract
Abstract Plasma source low-energy ion-enhanced deposition is a new approach for the deposition of thin films on steel and alloys with specific advantages over ion beam-enhanced deposition (IBED) and the complex combined plasma source ion implantation (PSII) and IBED (PSII-IBED). It may be used to develop a thin film process using the plasma-based low-energy ion implantation including plasma source ion nitriding and plasma source ion carburizing. A deposition apparatus based on an electron cyclotron resonance (ECR) microwave plasma source, a magnetron sputtering target and a pulsed low-voltage power supply from 0.5 to 2 kV has been developed. The magnetron sputter deposition of Ti metal films and plasma source low-energy nitrogen ion implantation under a high nitrogen ion implantation dose rate of 0.65–1.20 mA/cm 2 are used alternately in order to synthesize the stoichiometric TiN films on A3 mild steel and M2 high-speed steel at a deposition rate of 50–110 nm/min. The Knoop microhardness of the 1.2–1.6 μm thick TiN films on the M2 steel is in the range of 18.0–20.0 GPa (0.05 N load). The critical loads of the TiN films on the M2 steel measured by the scratch test are 22–35 N corresponding to the formation of an intermixed layer of about 40 nm thick between the film and the steel substrate. The corrosion resistance of the TiN films in 0.5 mol/l H 2 SO 4 solution is evaluated by performing electrochemical polarization measurements. Their superior corrosion resistance is a result of the dense fine-grained microstructure and is independent of the preferential orientation of the films.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Plasma Diagnostics and Applications · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Conrad · J Appl Phys · 1987 · 62 · 77710.1063/1.339858 ↗
2. Conrad · Mater Sci Eng A · 1989 · 116 · 19710.1016/0921-5093(89)90146-9 ↗
3. Tendys · Appl Phys Lett · 1988 · 53 · 214310.1063/1.100299 ↗
4. Collins · Mater Sci Eng A · 1991 · 139 · 17110.1016/0921-5093(91)90613-R ↗
5. Conrad · J Vac Sci Technol A · 1990 · 8 · 314610.1116/1.576598 ↗
6. Chu · Rev Sci Instr · 1997 · 68 · 186610.1063/1.1147959 ↗
7. Bell · J Phys D · 1991 · 25 · A29710.1088/0022-3727/25/1A/045 ↗
8. Lei · J Vac Sci Technol A · 1995 · 13 · 298610.1116/1.579625 ↗
9. Lei · Surf Coat Technol · 1997 · 91 · 2510.1016/S0257-8972(96)03155-6 ↗
10. Lei · J Vac Sci Technol A · 1998 · 16 · 52410.1116/1.581071 ↗
11. Wang · Vacuum (Zhenkong) · 1994 · 4 · 19
12. Wu · J Instr Anal (Fenxi Ceshi Xuebao) · 1998 · 16 · 1
13. Sundgren · Thin Solid Films · 1985 · 128 · 2110.1016/0040-6090(85)90333-5 ↗
14. Heinke · Thin Solid Films · 1995 · 270 · 43110.1016/0040-6090(95)06934-8 ↗
15. Hayashi · Mater Sci Eng A · 1989 · 115 · 34910.1016/0921-5093(89)90702-8 ↗
16. Aromaa · Mater Sci Eng A · 1989 · 140 · 72210.1016/0921-5093(91)90503-F ↗
17. Massiani · Thin Solid Films · 1992 · 217 · 3110.1016/0040-6090(92)90602-8 ↗
18. Baba · Surf Coat Technol · 1994 · 66 · 36810.1016/0257-8972(94)90032-9 ↗
19. Miyano · Surf Coat Technol · 1994 · 65 · 17910.1016/S0257-8972(94)80028-6 ↗
20. Ziegler JF, Biersack JP, Littmark U. The stopping and range of ions in solids. New York: Pergamon 1985; Vol. 1.10.1007/978-1-4615-8103-1_3 ↗
21. Wolf · Nucl Instr and Meth B · 1991 · 59/60 · 17310.1016/0168-583X(91)95201-N ↗
22. Ensinger · Surf Coat Technol · 1998 · 99 · 110.1016/S0257-8972(97)00410-6 ↗