journal article·2015-04

Rotatable serial co-sputtering of doped titania

V. Sittinger, A. Pflug, W. Dewald, S. Jung, C. Britze, A. Kaiser, W. Werner, B. Szyszka, G. Bräuer

Vacuum· Volume 114
Publisher page

Abstract

Abstract Serial co-sputtering is an extension of conventional magnetron sputtering: it utilizes cylindrical primary rotating sputter sources within a metallic or reactive sputtering process. With one or more auxiliary sputter sources the surface of the primary sputter target is simultaneously coated with additional elements. In the primary sputtering process, these elements get implanted and mixed into the primary target material leading to production of multi-component films. In this paper we use an installation of this technology called “Megatron™”, which involves an effective gas separation between primary and auxiliary chamber volumes. With this setup, we fabricated TiO 2 :W and TiO 2 :Nb layers by using a rotating Titania target as primary source and planar W and Nb targets as auxiliary sources, respectively. In both cases the so called sputter yield amplification effect (SYA) was demonstrated: Within the TiO 2 matrix the heavier element e. g. tungsten keeps the sputter cascade close to the target surface and thus significantly enhances the sputter rate. Additionally, by niobium doping in combination with a post-deposition annealing it is possible to get TiO 2 :Nb layers with tailored Nb composition as conductive transparent oxides (TCO). Due to the independent power control of the secondary target the tungsten and niobium concentration can easily be optimized. We present doping series for optimizing either the SYA effect for TiO 2 :W or the effect of a transparent conductive TCO for TiO 2 :Nb. With tungsten doping we achieved an enhancement of more than twice the DC sputter rate. With niobium doping and a post-deposition annealing step (350 °C) we reach resistivity values of about 1.2 × 10 −3 Ωcm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · ZnO doping and properties · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. Serial cosputtering of some metal alloys: enhancement of partial sputtering yields of light metals10.1116/1.578731 ↗
2. Serial cosputtering of metals: modelling of sputtering from a periodically codeposited surface10.1016/0257-8972(93)90240-O ↗
3. Atom assisted sputtering yield amplification10.1116/1.578049 ↗
4. Recent developments in the field of transparent conductive oxide films for spectral selective coatings, electronics and photovoltaics10.1016/j.cap.2012.07.022 ↗
5. Doehler · 1994
6. Particle-in-cell Monte Carlo simulation for process analysis and development
7. Modelling of sputtering yield amplification in serial reactive magnetron co-sputtering10.1016/j.surfcoat.2012.06.005 ↗
8. Nucleation and growth in TiO2 films prepared by sputtering and evaporation10.1016/0040-6090(94)90843-5 ↗
9. Junghähnel · 2012