Cathode sputtering as a pre-treatment for gas nitriding
Source abstract
Abstract
Abstract The authors present the results of studying the influence of cathode sputtering used as a pre-treatment on the kinetics of surface layer formation. The samples made of α-iron were cathode sputtered before nitriding. The cathode sputtering process was performed in a separate chamber in argon or nitrogen atmosphere. The following parameters of cathode sputtering were applied: voltage; 700–1350 V, current density; 1–4 A/cm2, time 10 min. The sample was connected as a cathode and immediately after sputtering it was introduced into the reaction zone of the furnace. Gaseous nitriding was carried out in two types of atmospheres: 50%NH3+NH3dys and 15% NH3+NH3dys. The time of the nitriding process was 1 h and the temperature 843 K. The results show that sputtering process has a very important influence on increasing the kinetics of nitride layer formation. This influence also depends on the parameters of the sputtering. The higher the current density and voltage, the thicker the nitride layer obtained. Both the gases used for sputtering have the same influence on the nitriding kinetics. Only small changes of surface roughness were observed. The results were controlled by metallographic testings (scanning and light microscopy) and roughness measurements. The structure investigation of the upper surface after sputtering was evaluated by X-ray diffraction (GID).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · GaN-based semiconductor devices and materials · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Marchev · Surface and Coatings, Technology · 1998 · 99 · 22510.1016/S0257-8972(97)00532-X ↗
2. Jentzsch · Kristall und Technik · 1979 · 14 · 61710.1002/crat.19790140516 ↗
3. Kozaryn C. Doctor thesis, Technical University of Szczecin, Szczecin 1979.
4. Kaplina GS, Zhunkovskij GL, Schutzschichten auf Metallen 1972;(6):73.
5. Inokuti · Metal Trans A · 1975 · 6A · 77310.1007/BF02672299 ↗
6. Baranowska J, Szczeciński K, Wysiecki M. EUROMAT, 97, Conf. Proc. Vol. II, Maastricht 1997;3/279.
7. Ratajski J, Olik R, Tacikowski J. Conf. Proc. Inżynieria Materialowa, Szczecin-Świnoujście, Poland 1998;409.
8. Du · Surface Engineering · 1995 · 11 · 30110.1179/sur.1995.11.4.301 ↗
9. Baranowska J, Szczeciński K, Wysiecki M. Conf. Proc: Obróbka Powierzchniowa, Kule 1996, Częstochowa, Poland; 59.
10. Baranowska · Surface and Coating Technology · 2000 · 125 · 3010.1016/S0257-8972(99)00566-6 ↗
11. Ionic Bombardment Theory and Application, New York: Gordon and Breach, 1962.
12. Gnaser · 1999
13. Rozendaal · Metal Trans A · 1983 · 14A · 39510.1007/BF02644217 ↗
14. Małdziński · Tacikowsk J. Inżynieria Powierzchni · 1998 · 2 · 49
15. Mittemeijer · Surface Engineering · 1997 · 13 · 48310.1179/sur.1997.13.6.483 ↗