Tungsten electrode erosion on DC horizontal short free arc in air
Source abstract
Abstract
Abstract It is important to decrease the electrode erosion, because the lifetime of an electrode should increase longer. Therefore, we tried to measure the temperature of DC horizontal short free arc between the tungsten electrodes in atmospheric air with a spectroscope and the electrode erosion. The temperature was measured to be about 5500 K at 30, 50, 70 A current and 0.01 m plasma length. The energy dissipating ratio of the electrode erosion is almost 0.2%. The energy of input power is used not for electrode erosion, but for generation of the free arc discharge and the temperature increment of the electrode. The electrode erosion was measured to be about 0.0099–0.0317 g/s at 30, 50, 70 A. The erosion of anode was higher than that of cathode.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Vacuum and Plasma Arcs · Welding Techniques and Residual Stresses · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. Iwao · Trans ISIJ Int · 2000 · 40 · 27510.2355/isijinternational.40.275 ↗
2. Inaba · IEEE Trans DEI · 2000 · 7 · 68410.1109/94.879362 ↗
3. Iwao · J. Japan Inst. Metals · 1999 · 63 · 1510.2320/jinstmet1952.63.1_15 ↗
4. Iwao · Elect Eng Jpn · 2002 · 139 · 110.1002/eej.10006 ↗
5. Iwao · Vacuum · 2002 · 65 · 29910.1016/S0042-207X(01)00434-1 ↗
6. Iwao · Vacuum · 2000 · 59 · 8810.1016/S0042-207X(00)00258-X ↗
7. Liu · Trans MRSJ · 2000 · 25 · 381
8. Liu · Vacuum · 2002 · 65 · 46310.1016/S0042-207X(01)00457-2 ↗
9. Iwao · Trans IEE Jpn · 2003 · 123-B · 866