journal article·2000-11

Light-absorbing wide-band AR coatings on PET films by sputtering

Takuji Oyama, Tomohiro Yamada

Vacuum· Volume 59· Issue 2-3
Publisher page

Abstract

Abstract Wide-band antireflection (AR) coating employing a light-absorbing layer, has been applied to PET film with acrylic anti-abrasion coating. A properly designed RF plasma treatment of the PET substrate before the deposition has been found to play an important role in the improvement of the adhesion at the interface. Ar and N2 were found to be better atmosphere gas species for the RF plasma treatment compared to O2. RF electrode located behind the substrate was found to be in good geometrical arrangement reducing the treatment time to obtain enough adhesion strength. An insertion of a thin SiNx between the AR layers and PET film also improved the adhesion. Using these combined pre-treatments before the deposition of the AR coating, a wide-band AR coating with good mechanical properties has been realized on PET film substrate. This coating also showed a sufficiently low sheet resistance which is often required for the electromagnetic shielding of cathode ray tubes (CRTs).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: GaN-based semiconductor devices and materials · Acoustic Wave Resonator Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (6)

Show source-provided references
1. Beisenhelz D, Brauer G, Szczyrbowski J, Teschner, G. Glass processin days 1997;309.
2. Oyama · SID Inter Symp Digest of Technical papers, · 1998 · 29 · 26210.1889/1.1833743 ↗
3. Oyama · Thin Solid Films · 1999 · 351 · 23510.1016/S0040-6090(99)00214-X ↗
4. Tachibana Y, Ohsaki H, Oyama T. Proceedings of the sixth International Symposium on New Glass 1997. p. 153.
5. Oyama T, Ohsaki H, Ogata Y, Shimizu J. Proceedings of the third International Symposium on Sputtering and Plasma Processes, 1995. p. 31.
6. Scholl RA. Proceedings of the 36th Annual Technical Conference Society of Vacuum Coaters, 1993. p. 405.