Influence of thermal treatment on the adhesion of copper coatings on carbon substrates
Source abstract
Abstract
Abstract Sputter deposited copper (Cu) coatings on plane glassy carbon (C) substrates serve as a model for the interface between Cu- and C-fibres in Cu–C metal matrix composites (MMCs). This interface is of crucial importance for the mechanical and thermal properties of copper carbon MMCs. If the Cu-coating is deposited on a nitrogen(N)-radiofrequency (RF)-plasma treated C-substrate at room temperature (RT), the adhesion of Cu to C is excellent. In a further step the Cu-coated C-samples are subjected to a thermal treatment at 800 °C under high vacuum conditions for 1 h to partially mimic the hot pressing step involved in the production of real MMCs. This thermal treatment generates a recrystallization induced dewetting process of the Cu coating from the C substrate, which drastically reduces the adhesion of Cu to C. If a molybdenum-intermediate layer is deposited, no dewetting of the Cu-film takes place, although recrystallization occurs. Additionally the adhesion of the Cu-film is, depending on a minimum thickness of the molybdenum layer, low in the as-deposited state and is strongly increased after the annealing step. SIMS-measurements indicate that this increase is caused by the formation of molybdenum–carbides during the heat treatment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Parkasan · Composites Part A · 1997 · 28 · 101910.1016/S1359-835X(97)00077-8 ↗
2. Koráb · Composites Part A · 1999 · 30 · 102310.1016/S1359-835X(98)00200-0 ↗
3. Mayerhofer K · Appl Surf Sci · 2001 · 179 · 27510.1016/S0169-4332(01)00295-1 ↗
4. Zhu · J Mater Sci · 1997 · 32 · 106110.1023/A:1018542809294 ↗
5. Wan · Mater Sci Eng A · 2000 · 288 · 2610.1016/S0921-5093(00)00887-X ↗
6. Korb · Composites Part A · 1998 · 29 · 156310.1016/S1359-835X(98)00066-9 ↗
7. Liu · ISIJ Int · 1989 · 29 · 56810.2355/isijinternational.29.568 ↗
8. Dübgen R, Popp G. Glasartiger Kohlenstoff SIGRADUR®—ein Werkstoff für Chemie und Technik, leaflet of HTW Hochtemperatur-Werkstoff GmbH, Germany.
9. HTW Hochtemperatur-Werkstoff GmbH, http://www.htw-germany.com.
10. Neubauer · Thin Solid Films · 2003 · 433 · 16010.1016/S0040-6090(03)00318-3 ↗
11. Schwarz B. Untersuchung der Haftfestigkeit von Kupfer auf oberflächen-behandeltem glasartigen Kohlenstoff mittels Transmissionselektronenmikroskopie. Master's thesis, Vienna University of Technology; 2003.
12. Srolovitz · J Mater · 1995 · 47 · 31
13. Schrank · Thin Solid Films · 2004 · 459 · 27610.1016/j.tsf.2003.12.143 ↗
14. Eisenmenger-Sittner · Surf Coat Technol · 2004 · 180–181 · 41310.1016/j.surfcoat.2003.10.143 ↗
15. Warnes · J Less-Common Met · 1985 · 106 · 24110.1016/0022-5088(85)90259-0 ↗
16. Isobe · J Less-Common Met · 1989 · 147 · 26110.1016/0022-5088(89)90199-9 ↗
17. Mayerhofer K, Schrank C, Eisenmenger-Sittner C, Hutter H. Appl Surf Sci, in press, doi:10.1016/j.apsusc.2005.02.018.10.1016/j.apsusc.2005.02.018 ↗