Round pinholes in indium-tin-oxide thin films on the glass substrates: a Taguchi method analysis and theoretical approach to their origins
Source abstract
Abstract
Abstract The origin of the round pinholes, ranging 30–70 μm in diameter, in indium-tin-oxide (ITO) thin films on the glass substrates were investigated. It has been found that the round pinholes in ITO thin films might arise from the tiny particles and organics, adsorbed onto the residual water of imperfectly pre-dried glass substrates at the pre-drying bath. The tiny particles and organics on the glass substrates might cause to weaken the adhesive powers between the ITO thin films and the glass substrates, finally resulting in the round pinholes at the photopatterning process. By Taguchi methods, it was revealed that the generation of the round pinholes in ITO thin films was directly related to the temperature and the amount of heat supply at the pre-drying bath. A simplified mechanism on the formation of the round pinholes in ITO thin films is proposed and verified.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Roughness and Optical Measurements · ZnO doping and properties · Advanced Sensor Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (7)
Show source-provided references
1. Carl · Thin Solid Films · 1997 · 295 · 15110.1016/S0040-6090(96)09167-5 ↗
2. Bhagwat · Surf Coat Technol · 1999 · 111 · 16310.1016/S0257-8972(98)00727-0 ↗
3. Meng · Thin Solid Films · 1998 · 322 · 5610.1016/S0040-6090(97)00939-5 ↗
4. Bender · Thin Solid Films · 1999 · 354 · 10010.1016/S0040-6090(99)00558-1 ↗
5. Takatsuji · Vacuum · 2000 · 59 · 60610.1016/S0042-207X(00)00323-7 ↗
6. Lee SB. The application of Taguchi methods using the minitab. An Yang: Eretec 2001. p. 157.
7. Smith JM, Van Ness HC, Abbott MM. Introduction to chemical engineering thermodynamics. New York: McGraw-Hill, 1996. p. 126.