Radiation power emitted from Ar torch short plasma as a function of in-put power in several kW
Source abstract
Abstract
Abstract When the waste would be reduced by the arc plasma, the radiation power should be put down, because it is a great deal of loss. On the other hand, we can use it as a clean source for heating materials in a vacuum chamber. In this case, it is expected that the radiation becomes greater. In both cases the radiation power emitted from the arc plasmas has to be precisely controlled. We measured the radiation power emitted from a plasma torch as a function of the electric in-put power. The radiation power was measured to be 200–700 W for an in-put power of 2–4.4 kW and increased in proportion to the 1.8th power of the current or near 1.6th power of the in-put power. Therefore, the radiation power increases steeply with the in-put power. The radiation efficiency for a wall-stabilized arc model was 31% in the condition of 2 cm appearance plasma length, 100 A current and 4400 W in-put power. An equipment using a vacuum chamber for the plasma treatment of the hazardous wastes due to the radiation power emitted from torch plasma is proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Vacuum and Plasma Arcs · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (7)
Show source-provided references
1. Iwao · Trans IEEJ · 1999 · SP-99-69 & HV-99-75 · 45
2. Inaba · Trans IEEJ · 1998 · 118-A · 97910.1541/ieejfms1990.118.9_979 ↗
3. Iwao · Trans IEEJ · 1998 · 118-A · 92410.1541/ieejfms1990.118.9_924 ↗
4. Inaba · Trans IEEJ · 1998 · 118-A · 1010.1541/ieejfms1990.118.1_10 ↗
5. Iwao · Trans JIM · 1999 · 63 · 15
6. Inaba T, Kusunoki S, Endo M. Proceedings of the IEEE IAS. 31st Annual Meeting 1996:2169–72.
7. Ozaki Y, Takuma T, Inaba T et al. Denki Shoin 1997:240.