journal article·2024-12Open access

Evolution of interface and surface morphology of WC/SiC multilayers with increase in number of bilayers

Zile Wang, Tongzhou Li, Zhe Zhang, Chenyuan Chang, Jingjing Xia, Zengbo Zhang, Li Jiang, Runze Qi, Qiushi Huang, Zhong Zhang, Zhanshan Wang

Vacuum· Volume 230

Abstract

WC/SiC multilayer mirrors are promising elements for operation in the short wavelength range of hard X-rays and even gamma-rays. A set of WC/SiC multilayers with nominal bilayer thickness of 3.0 nm with 30, 50, 100, and 200 bilayers have been deposited by magnetron sputtering method. The evolution of interface and surface morphology with addition of the number of bilayers has been investigated. The methods of grazing incidence X-ray reflectivity , X-ray diffuse scattering , optical profiler, atomic force microscope, transmission electron microscopy and energy-dispersive X-ray spectroscopy have been used. It is found that the interface roughness plays a dominant role in interface imperfections of WC/SiC and it exhibits slight accumulation across the multilayers with the number of bilayers increasing. The surface roughness also increases in relatively high spatial frequency range as the number of bilayers has been added, due to the cumulative increase in interface roughness. The interface roughness accumulation ultimately contributes to the diminishment of optical performance of WC/SiC multilayers with a large number of bilayers. At the wavelength of 0.154 nm, a peak reflectivity of 69.2 % is achieved for a 100 bi-layer multilayer under the grazing incidence of approximately 1.5°, while lower reflectivity of 67.2 % for a 200 bi-layer multilayer.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. High reflectance Cr/V multilayer with B4C barrier layer for water window wavelength region10.1364/OL.41.000701 ↗
2. Increasing soft x-ray reflectance of short-period W/Si multilayers using B4C diffusion barriers
3. Windt · 2015 · vol. 9603 · 96031C
4. Development of aperiodic multilayer mirrors operated at W-Lβ line for plasma diagnostics application10.1007/s41365-023-01302-3 ↗
5. Reflective optics for hard X-ray nanofocusing applications at the ESRF, Synchrotron Radiat
6. Microstructure evolution and hard x-ray reflectance of ultrathin Ru/C multilayer mirrors with different layer thicknesses
7. Background pressure induced structural and chemical change in NiV/B4C multilayers prepared by magnetron sputtering
8. Cr/B4C multilayer mirrors: study of interfaces and X-ray reflectance10.1063/1.4944723 ↗
9. Evolution of the interface microstructure of short-period Cr/Ti multilayers with increase in number of bi-layers10.1016/j.tsf.2021.138840 ↗
10. Performance of Co/Ti multilayers in a water window soft x-ray regime10.1364/AO.56.007525 ↗
11. Interface evolution of Co/Ti multilayers with ultra-short period10.1016/j.tsf.2019.137688 ↗
12. Correlation of interface roughness for ion beam sputter deposited W/Si multilayers10.1063/1.3573662 ↗
13. Influence of interface roughness on reflectivity of tungsten/boron-carbide multilayers with variable bi-layer number by X-ray reflection and diffuse scattering10.3788/COL20090708.0738 ↗
14. Small d-spacing WC/SiC multilayers for future hard X-Ray telescope designs10.1007/s10686-006-9022-9 ↗
15. Jensen · Investigation of new material combinations for hard x-ray telescope designs · 2006 · 6266
16. Ultra-short-period WC/SiC multilayer coatings for x-ray applications10.1016/j.nima.2012.10.066 ↗
17. Physics of reflective optics for the soft gamma-ray photon energy range10.1103/PhysRevLett.111.027404 ↗
18. Gamma-ray mirrors for direct measurement of spent nuclear fuel10.1016/j.nima.2014.01.005 ↗
19. Reflective multilayer optic as hard X-ray diagnostic on laser-plasma experiment10.1063/1.4906509 ↗
20. On the properties of WC/SiC multilayers10.3390/app8040571 ↗
21. Microstructure evolution in magnetron-sputtered WC/SiC multilayers with varied WC layer thicknesses10.3390/coatings14060720 ↗
22. Characterization of structures from X-ray scattering data using genetic algorithms10.1098/rsta.1999.0469 ↗
23. IMD--Software for modeling the optical properties of multilayer films10.1063/1.168689 ↗
24. Asymmetric interface and growth mechanism in sputtered W/Si and WSi2/Si multilayers10.1016/j.apsusc.2022.154531 ↗
25. Nonspecular x-ray reflection from rough multilayers10.1103/PhysRevB.49.10668 ↗
26. Nonspecular x-ray scattering in a multilayer-coated imaging system10.1063/1.368098 ↗
27. Growth, structure, and performance of depth-graded W/Si multilayers for hard x-ray optics10.1063/1.373681 ↗
28. Effect of argon-nitrogen mixed ambient Ni sputtering on the interface diffusion of Ni/Ti periodic multilayers and supermirrors10.1016/j.vacuum.2019.108864 ↗
29. Interface evolution of Cr/Ti multilayer films during continuous to discontinuous transition of Cr layer10.1016/j.vacuum.2020.109610 ↗
30. Interfacial roughness correlation in multilayer films: influence of total film and individual layer thicknesses10.1063/1.350976 ↗
31. Influence of FeCo layer thickness on the interfacial asymmetry of FeCo/Si multilayers fabricated by direct current magnetron sputtering10.1364/AO.473881 ↗
32. The effect of energy of Ar recoil particles on the interfaces and micro-structure in Ni/Ti multilayer fabricated by direct current magnetron sputtering technique10.1016/j.vacuum.2024.113186 ↗