journal article·2020-02

Field emission behaviors under trapezoid voltage pulses with a DC bias

Zhongyang Ji, Gengmin Zhang, Yunhui Li, Jindi Wei, Yingjie Xing, Jin Yang, Wensheng Zhou

Vacuum· Volume 172
Publisher page

Abstract

Abstract When a field emission cathode works under voltage pulses, remarkable charging current that is equal to the displacement current in the cathode-anode gap occurs in the circuit at the rising edges of the pulses. This charging current does not only interfere the measurement of the emissive current from the cathode but also constitutes a threat to the components in the circuit. This article describes the authors’ effort to tackle this problem using trapezoid voltage pulses with a DC bias. The DC bias was not high enough to extract a large number of electrons out of the cathode. Instead, it was devoted to reducing the amplitudes of the voltage pulses. The introduction of a DC bias considerably lowered the charging current and the emissive current was only slightly influenced. The unfavorable consequence of the DC bias was a low unwanted background current between the pulses. To minimize it, the value of the DC bias was optimized to reach a good compromise between lowering the charging current and avoiding the background current.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrostatic Discharge in Electronics · Radiation Effects in Electronics · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Review and prospect of field emission cathodes and the application
2. Generation of continuous and pulsed diagnostic imaging x-ray radiation using a carbon-nanotube-based field-emission cathode10.1063/1.1492305 ↗
3. The European project OPTHER for the development of a THz tube amplifier
4. Design and field emission test of carbon nanotube pasted cathodes for traveling-wave tube applications10.1109/TED.2006.884076 ↗
5. Beam test of a novel CNT cathode-based electron gun assembled in a TWT10.1109/TED.2019.2902385 ↗
6. An ionization gauge for ultrahigh vacuum measurement based on a carbon nanotube cathode10.1063/1.5006526 ↗
7. Development of an CNT field emission UHV ionization gauge with customized electronics10.1063/1.5052304 ↗
8. Field-emission electron source for vacuum micropump10.1016/j.vacuum.2011.04.010 ↗
9. Field emission performance of multiwalled carbon nanotubes for a low-power spacecraft neutraliser10.1016/j.actaastro.2008.10.012 ↗
10. A Carbon Nano Tube electron impact ionisation source for low-power, compact spacecraft mass spectrometers10.1016/j.asr.2012.01.018 ↗
11. Microwave devices: carbon nanotubes as cold cathodes10.1038/437968a ↗
12. Behaviors of field emitters under pulsed voltages10.1007/s11431-015-0778-0 ↗
13. Curbing charging currents in pulsed field emission by prolonging pulse edges
14. Vertically aligned carbon nanotubes grown by pyrolysis of iron, cobalt, and nickel phthalocyanines10.1021/jp034895o ↗
15. Modulation of field emission by small AC signals10.1007/s11431-017-9080-5 ↗
16. Field emission properties of multiwalled carbon nanotubes10.1016/S0304-3991(97)00129-0 ↗
17. Field emission from well-aligned zinc oxide nanowires grown at low temperature10.1063/1.1518810 ↗
18. Physical properties of thin-film field emission cathodes with molybdenum cones10.1063/1.322600 ↗