A capillary manometer for pressure measurements in small cavities
Source abstract
Abstract
Abstract Measuring pressures inside small cavities is a demanding task, but an essential one for applications in microfluidics. Although several MEMS-based pressure sensors have already been demonstrated, their fabrication is complicated and they usually require external electronics, making their use onerous. In this paper we propose a simple, home-built, pressure sensor, based on a thin glass capillary. It is in its essence a gas manometer, where the position of a liquid plug inside a capillary, sealed at one end, is correlated with the pressure at the open end. By calibrating in a vacuum chamber, we achieved a pressure uncertainty of less than 10 mbar. The suitability of the sensor for characterizing polydimethylsiloxane (PDMS) pumps was tested by measuring air diffusion through PDMS rings. Permeability and diffusivity were determined from comparison to the numerical model, based on the finite-difference method (FDM). Their values at 25 °C were found to be 2.5 × 10 −6 cm 2 /s and 1.4 × 10 −5 cm 2 /s, respectively. Although the lifetime of this type of capillary manometer is limited by the evaporation of the liquid plug at low pressures, its small probe size and simple preparation make it a convenient and relatively accurate sensor to quickly measure the pressure in small cavities.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microfluidic and Capillary Electrophoresis Applications · Analytical Chemistry and Sensors · Heat Transfer and Boiling Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Systematic characterization of degas-driven flow for poly (dimethylsiloxane) microfluidic devices10.1063/1.3584003 ↗
2. Stand-alone self-powered integrated microfluidic blood analysis system (simbas)10.1039/C0LC00403K ↗
3. A “place n play” modular pump for portable microfluidic applications10.1063/1.3692770 ↗
4. Power-free poly (dimethylsiloxane) microfluidic devices for gold nanoparticle-based dna analysis10.1039/b403930k ↗
5. Microstructured vacuum gauges and their future perspectives10.1016/j.vacuum.2007.08.001 ↗
6. Miniature and mems-type vacuum sensors and pumps10.1016/j.vacuum.2009.05.003 ↗
7. A micro-pirani vacuum gauge based on micro-hotplate technology10.1016/j.sna.2005.10.016 ↗
8. Micro-pressure sensor made of conductive {PDMS} for microfluidic applications10.1016/j.mee.2009.11.005 ↗
9. A microfluidic experimental platform with internal pressure measurements10.1016/j.sna.2004.07.014 ↗
10. Crank · 1979
11. 2016
12. Pure and mixed gas acetone/nitrogen permeation properties of polydimethylsiloxane [pdms]10.1002/(SICI)1099-0488(19980130)36:2<289::AID-POLB8>3.0.CO;2-M ↗
13. Solvent flux through dense polymeric nanofiltration membranes10.1016/j.memsci.2003.10.027 ↗
14. Gas transport characteristics of plasma treated poly (dimethylsiloxane) and polyphosphazene membrane materials10.1016/S0376-7388(02)00068-6 ↗
15. Sorption and partial molar volume of gases in poly (dimethyl siloxane)10.1002/polb.1990.090280808 ↗
16. Transport study of pure and mixed gases through pdms membrane10.1016/j.cej.2005.12.010 ↗