Improvement of deuterium emission by St 172 NEG pump in a sealed off vacuum device
Source abstract
Abstract
Abstract Zirconium based alloys are proved to be a good material for hydrogen storage as well as a vacuum pump. A non evaporable getter pump based on St 172 was tested for deuterium storage capacity in a sealed off vacuum device. The vacuum in the range of ultra high vacuum was maintained by the getter pump by gettering. Initial vacuum was created by a turbo molecular pumping system. After activation of the getter, test chamber was charged at 1 bar and 3 bar deuterium pressure for 24 h in two different experimental campaigns. After charging with deuterium, the chamber was pumped to ultimate vacuum and isolated from the TMP. The partial pressure of deuterium for different temperature of the getter was measured in sealed condition. Higher charging pressure improves the partial pressure of deuterium during desorption cycle. The experimental details and the results are presented in this article.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Physics and Applications · Fusion materials and technologies · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. A novel route to extreme vacua: the non-evaporable getter thin film coatings10.1016/S0042-207X(98)00377-7 ↗
2. A review of the wall problem and conditioning techniques for tokamaks10.1016/0022-3115(80)90303-7 ↗
3. A vacuum-sealed miniature X-ray tube based on carbon nanotube field emitters10.1186/1556-276X-7-258 ↗
4. Production of extreme high vacuum with non evaporable getters10.1088/0031-8949/1997/T71/002 ↗
5. Development of compact D–D neutron generator10.1134/S0020441213010260 ↗
6. Low voltage operation of plasma focus10.1063/1.3470917 ↗
7. Development and characterization of a high yield transportable pulsed neutron source with efficient and compact pulsed power system10.1063/1.4961646 ↗
8. Development of hollow anode penning ion source for laboratory application10.1016/j.nima.2011.12.030 ↗
9. Chemical pumping in vacuum technology10.1016/0042-207X(95)00252-9 ↗
10. Diffusion of hydrogen and deuterium in Zr-Al10.1016/0022-3115(82)90280-X ↗
11. Theory of bulk gettering10.1063/1.332477 ↗
12. Kinetics of hydrogen uptake for getter materials10.1016/j.vacuum.2003.12.155 ↗
13. Measurement of H2, D2 solubilities in Zr–Al10.1116/1.571588 ↗
14. Oxygen diffusion in the non-evaporable getter St 707 during heat treatment
15. Vacuum properties of TiZrV non-evaporable getter films10.1016/S0042-207X(00)00246-3 ↗
16. 2020