Shape-righting capacity analysis of vacuum hot bulge forming process of reactor coolant pump rotor-can with ring-shaped defects
Source abstract
Abstract
Abstract Rotor-can is one of the key components of the canned reactor coolant pump(RCP) in nuclear industry and it can be used for protecting the rotor from corrosion damage. It demands high dimension precision, posing great challenges to the processing technology. Vacuum hot bulge forming(VHBF) process is thought as an optional technique to promote the manufacture precision. In this paper, a 2-D nonlinear thermo-mechanical coupled finite element model was established to simulate the VHBF process of rotor-can with ring-shaped defect. Based on this model, the radial displacement field and inner radius distribution of rotor-can after VHBF process were calculated. The shape of defect after VHBF process was predicted. And the shape righting capacity of VHBF process for RCP rotor-can with ring-shaped defect was analyzed. The results show that VHBF process can modify the dimension error and shape error of rotor-can with ring-shaped defect. With decreasing width and increasing height of the defect on rotor-can, the shape-righting difficulty is increasing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. The research on AP1000 nuclear main pumps' complete characteristics and the normalization method10.1016/j.anucene.2016.08.014 ↗
2. Brief analysis on fabrication process of AP1000 reactor coolant pump can
3. Simulation and experimental verification of a new method to extend the limited time of the shrink fitting process for the ultrathin-walled reactor coolant pump rotor-can10.1016/j.anucene.2017.08.029 ↗
4. Effect of temperature on vacuum hot bulge forming of BT20 titanium alloy cylindrical workpiece10.1016/S1003-6326(07)60207-6 ↗
5. FEM analysis of vacuum hot bulge forming of Hastelloy C-276 thin-wanned cylindrical workpiece10.1007/s11771-014-2271-2 ↗
6. Analysis of bulging process of aluminum alloy by overlapping sheet metal and its formability[J]10.1016/S1003-6326(15)63697-4 ↗
7. Three-dimensional finite element simulation of bulge forming using a solid bulging medium10.1016/S0168-874X(00)00023-8 ↗
8. Analysis of die behaviour during bulge forming operations using the finite element method10.1016/S0168-874X(02)00074-4 ↗
9. A mathematical model of autoclave age forming10.1016/0924-0136(91)90220-9 ↗
10. Constitutive modeling of primary creep for age forming an aluminium alloy10.1016/j.jmatprotec.2004.04.304 ↗
11. Modeling of springback in creep forming thick aluminum sheets10.1016/S0749-6419(03)00078-0 ↗
12. Wang · 2011
13. Evolution of precipitates during two-stage stress-aging of an Al-Zn-Mg-Cu alloy10.1016/j.jallcom.2016.05.161 ↗
14. Lin · 2013 · vol 588 · 347
15. Effects of creep-aging parameters on aging precipitates of a two-stage creep-aged Al-Zn-Mg-Cu alloy under the extra compressive stress10.1016/j.jallcom.2018.01.238 ↗
16. Zhu · 2014 · 21 · 3019
17. Finite element simulation of vacuum hot bulge forming process of reactor coolant pump rotor-canp10.4028/www.scientific.net/MSF.675-677.909 ↗
18. Study on creep deformation of reactor coolant pump rotor-can during vacuum hot bulge forming process10.4028/www.scientific.net/AMR.189-193.2415 ↗
19. Modeling Effects of process parameters on vacuum hot bulge forming of rotor cans
20. Stress relaxation test of Hastelloy C276 alloy and its creep constitutive equation