High efficient removal of tin from lead bullion based on the oxygen-controlling method under vacuum
Source abstract
Abstract
Abstract Conventional detinning process of lead bullion usually includes the following problems: the oxidizing refining process takes a long time to finish the oxidation of tin and products mass slag, while the basic refining process consumes large reagent, and the labor condition is poor. Therefore, a novel technique with oxygen controlled under vacuum condition for removing tin in crude lead was investigated, which shows characters such as, low-energy consumption, less metal wastage and environmental friendly. During this process, tin was removed from lead bullion by converting to tin oxide and concentrating in the dross. The experimental results showed that the residual Sn-concentration in detinned lead was about 2 ppm corresponding to the lead loss ratio about 2–3 wt% under the following experimental conditions: temperature of 750 °C, oxidation time of 80 min, agitation speed of 100 rpm and air flow rate of 60 mL/min corresponding to the residual gas pressure of 57 KPa.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Extraction and Separation Processes · Recycling and Waste Management Techniques · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Peng · 2004
2. Gross · 1995
3. Burany · 1991
4. Bergsoe · 1984
5. B. Friedrich, A. Arnold, Improvement of Selectivity and Kinetics in Lead Refining by Controlled Oxygen Offer and Employment of Rotor Injectors, in: Proceedings of EMC, 2011, p. 1.
6. Liu · 2013
7. Wang · 2014 · 30
8. Larouche · 1990
9. Stauter · 1978
10. Anode slimes treatment: the boliden experience10.1007/s11837-003-0087-x ↗
11. Lei · 2012
12. Thermodynamic modelling of the O–Sn system10.1016/S0040-6031(03)00059-5 ↗
13. Thermodynamic description of the Pb-O system10.1361/105497198770342238 ↗
14. Volsky · 1978
15. Chen · 1984
16. Qing · 2002
17. Optimization method for building envelope design to minimize carbon emissions of building operational energy consumption using orthogonal experimental design (OED)10.1016/j.habitatint.2011.12.006 ↗
18. Schulz · 2013