Electron beam assisted joining of nanograin-sized Fe–Co–V magnetic foils: Study and optimization of magnetic properties of weld joints
Source abstract
Abstract
Abstract Fe–Co–V alloys are of interest due to their excellent magnetic properties. These alloys are frequently used in the active parts of rotors of synchronous hysteresis motors. Welding of these alloys is however a great challenge because of various phase transitions occurring during solidification. These phase transitions change the microstructural, physical and mechanical properties of Fe–Co–V alloys. In this research work, the effect of electron beam welding on the magnetic properties of nanograin-sized Fe–Co-7.15wt%V foils was studied. Microstructural observation and texture analysis were carried out in order to clarify the changes of magnetic properties in the welded area. It was found that the magnetic properties of the welded area experience significant decrease due to the formation of large grains that have unfavorable orientation in the fusion zone. Also, a statistical analysis of the electron beam welding of this alloy was done using response surface methodology. The analysis considered the effect of beam current (0.7–1.7 mA), beam voltage (40–50 kV), welding speed (150–500 mm/min) and focused position (−20 to 0 mm) on the energy product ((BH)max) of welded samples. The experimental design was based on four-factor, five-level central composite rotatable design using linear and quadratic polynomial equations for proposing the mathematical model.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Analysis of antiphase domain growth in ternary FeCo alloys after different cooling rates and annealing treatments using neutron diffraction and positron annihilation10.1016/j.jallcom.2010.09.075 ↗
2. Texture evolution in heavily cold-rolled FeCo–2V Alloy during annealing
3. On the role of atomic ordering in the formation of a high-coercivity state in iron–cobalt–vanadium alloys10.1134/S0031918X12010152 ↗
4. Deformation texture and magnetic properties of dual-phase Fe–Co–V alloys10.1016/j.matdes.2009.03.033 ↗
5. Dapino · 1999 · vol. 12
6. Soft magnetic FeCo alloys: alloy development, processing, and properties10.1016/j.pmatsci.2005.04.001 ↗
7. Structure and magnetism in bcc-based iron-cobalt alloys10.1103/PhysRevB.73.224208 ↗
8. Phase transformation and magnetic properties of annealed Fe52.2Co46V1.8 alloy10.1016/j.vacuum.2004.01.002 ↗
9. Magnetic domains and coercivity in FeCo soft magnetic alloys10.1063/1.369073 ↗
10. Effect of heat-treatment on the room temperature ductility of an ordered intermetallic Fe–Co–V alloy10.1016/j.msea.2003.11.004 ↗
11. Influence of annealing temperature and Time on hysteresis parameters and, microstructure of an Fe/Co/V Alloy10.1109/TMAG.1975.1058770 ↗
12. Callister · 2001
13. Laughton · 2003
14. Effects of the heterogeneity in the electron beam welded joint on fatigue crack growth in Ti–6Al–4V alloy10.1016/j.msea.2011.09.014 ↗
15. Microstructure, hardness and residual stress distribution of dissimilar metal electron beam welds: maraging steel and high strength low alloy steel10.1179/026708309X12547309760885 ↗
16. The application of electron beam welding for the joining of dissimilar metals: an overview10.1016/0924-0136(95)02150-7 ↗
17. Microstructure and mechanical behaviors of electron beam welded NiTi shape memory alloys10.1016/j.matdes.2013.12.039 ↗
18. Mechanical properties of electron beam welded spheroidal graphite cast iron and mild steel welded joints10.2320/matertrans.F-M2011820 ↗
19. Montgomery · 2001
20. Magnetic effects of long-range ordering in an iron-cobalt-2% vanadium alloy10.1007/BF02643939 ↗
21. High strength FeCo–V intermetallic alloy: electrical and magnetic properties10.1557/JMR.2005.0206 ↗
22. Pinning effect of the grain boundaries on magnetic domain wall in FeCo-based magnetic alloys10.1063/1.370175 ↗
23. Evolution of strength and coercivity during annealing of FeCo based alloys10.1016/j.scriptamat.2004.05.028 ↗
24. Magnetic anisotropy and magnetostriction of ordered and disordered cobalt-iron alloys10.1063/1.1984643 ↗
25. The influence of electron-beam welding parameters on heat-affected-zone microfissuring in INCOLOY 90310.1007/BF02668538 ↗
26. Statistical modelling and computer programs for optimization of the electron beam welding of stainless steel
27. Model-based approach for quality improvement of electron beam welding applications in mass production10.1016/j.vacuum.2004.09.001 ↗
28. Cohran · 1963
29. Miller · 1999
30. High density Energy beam welding processes: electron beam and laser beam
31. Fusion zone during focused electron-beam welding10.1016/j.jmatprotec.2005.05.025 ↗
32. Influence of focusing thermal effect upon AZ91D magnesium alloy weld during vacuum electron beam welding10.1016/j.vacuum.2011.11.011 ↗