Carbon films deposited by MCECR plasma sputtering
Source abstract
Abstract
Abstract The mirror-confinement-type electron cyclotron resonance (MCECR) plasma source has high plasma density and high electron temperature, and it is quite useful in many plasma processing, and has been used for etching and thin-film deposition. In this paper, the carbon films about 50 nm thickness were deposited on Si (1 0 0) by MCECR plasma sputtering the sintered carbon target with the argon plasma, and its properties were studied. The bonding structure of the film was analyzed by using the X-ray photoelectron spectropscopy (XPS) and the nanostructure was evaluated with the high-resolution transmission electron microscopy (HRTEM). The tribological properties (friction coefficient, wear rate, and wear life) of the film was investigated by using the pin-on-disk tribometer under the conditions that the normal load is 1 N and the sliding velocity is 0.05 m/s. The nanohardness of the films was measured by using the nanoindenter under conditions that the maximum displacement is 30 nm and the maximum load is 500 μN. The optical properties were measured by using the ellipsometer. The residual stress was measured with a surface profilometer. The surface morphology was studied by using the atomic force microscope (AFM).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Ion-surface interactions and analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Mechanical and tribological properties of amorphous carbon films deposited on implanted steel substrates10.1016/j.tsf.2003.12.073 ↗
2. AFM observations of DLC films prepared by the ECR sputtering method10.1016/S0168-583X(96)00542-3 ↗
3. Ultra-thin carbon layer for high density magnetic storage devices10.1016/j.diamond.2003.12.018 ↗
4. Optical and electrical properties of amorphous carbon films deposited using filtered cathodic vacuum arc with pulse biasing10.1016/S0040-6090(03)01090-3 ↗
5. Tribological characteristics of highly wear-durable ECR-sputtered carbon film10.1016/S0257-8972(03)00048-3 ↗
6. Superhard conductive carbon nanocrystallite films10.1063/1.1435402 ↗
7. Combined magnetron sputtering and ECR-CVD deposition of diamond-like carbon films10.1016/S0257-8972(02)00157-3 ↗
8. Optimum substrate bias condition for TiN thin film deposition using an ECR sputter system10.1016/S0257-8972(03)00241-X ↗
9. Preparation of high quality strontium titanate based thin films by ECR plasma sputtering10.1016/S0257-8972(03)00059-8 ↗
10. Low temperature preparation of perovskite oxide films by ECR sputtering assisted with microwave treatment10.1016/S0257-8972(03)00694-7 ↗