journal article·2014-12Open access

Investigations on residual chemical contamination on machining aluminum components of turbo molecular pumps

Andrea Vinci, Bernard Pelissier, Catherine Le Guet, Hervé Fontaine, Rainer Mathes, René-Louis Inglebert

Vacuum· Volume 110

Abstract

Abstract In the recent Extreme Ultra Violet Lithography (EUVL) process developed in microelectronics, the presence of hydrocarbon molecules is critical for the performances of the optics. Hydrocarbons can cause carbon deposit on the mirrors surfaces which reduces the reflectivity of the mirrors (1 nm carbon deposit = 1% reflectivity loss). As the EUVL system cannot be baked in situ, the residual carbon contamination on each component integrated in the Extreme Ultra Violet (EUV) tool becomes critical. The study presented herein, deals with the problem of a possible carbon contamination source due to the EUVL pumping system. We report the study of a research method of the contamination sources of turbo molecular pumps (stator and rotor), suitable for the pump manufacturing environment. With the support of TD-GCMS/FID, a RGA characterization of the residual carbon contamination is made. A clear association between RGA spectrum features and characteristics of the cleaning process has been established. In particular, the final cleaning step in the pump manufacturing is a possible source of contamination. Therefore, the detergent concentration in the cleaning process was investigated. Correlations were made with XPS (X-ray photoemission spectrometry) characterizations of stator and rotor surfaces.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electron and X-Ray Spectroscopy Techniques · Advancements in Photolithography Techniques · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Model for the outgassing of water from metal surfaces10.1116/1.578482 ↗
2. Correlation of outgassing of stainless steel and aluminium with various surface treatments10.1116/1.578617 ↗
3. Outgassing rate of contaminated metal surface
4. Model for the outgassing of water from metal surfaces II10.1116/1.579004 ↗
5. Model for the outgassing of water from metal surfaces III10.1116/1.579673 ↗
6. Water adsorption-desorption on aluminium surface10.1016/S0169-4332(00)00812-6 ↗
7. Effect of baking temperature and air exposure on the outgassing rate of type 316L stainless steel10.1116/1.574262 ↗
8. Chiggiato · 2006
9. Reduction of outgassing from stainless surfaces by surface oxidation10.1016/0042-207X(90)94155-J ↗
10. Study of outgassing of stainless steel with various surface treatments10.1016/0042-207X(96)00045-0 ↗
11. Lüth · 2001
12. Thermal desorption of CO and H2 from degassed 304 et 347 stainless steel10.1116/1.578949 ↗
13. HF contamination of 200 mm Al wafers: a parallel angle resolved XPS study10.1016/j.mee.2010.11.004 ↗
14. Parallel angle resolved XPS investigations on 12 in. Wafers for the study of W and WSix oxidation in air10.1016/j.mee.2008.06.012 ↗