journal article·2020-03

Effects of MnO2 addition on the microstructure and dielectric properties of LiTaO3 ceramics

Wanwan Yang, Youfeng Zhang

Vacuum· Volume 173
Publisher page

Abstract

Abstract Lithium tantalite (LiTaO3) is an excellent single crystal. At present, only a few research studies have focused on polycrystalline LiTaO3 ceramics because it is beset with difficulties for the fabrication of dense ceramic by conventional sintering. In this study, LiTaO3 composite ceramics with added different MnO2 contents were obtained by hot-pressing sintering at 1300 °C. The sinterability, microstructure, and dielectric properties of LiTaO3 composite ceramics were investigated. The relative densities of the LiTaO3 composite ceramics are remarkably improved by the addition of the MnO2 powder. The LiTaO3 ceramic achieves the highest relative density (98.6%) and exhibits a homogeneous microstructure following the addition of 3 wt% MnO2 sintered in N2. Only the LiTaO3 phase is observed at a MnO2 content addition below 3 wt%, and the secondary phase is found with further increases of added MnO2 (≥3 wt%) to the MnO2/LiTaO3 (MLT) composite ceramics. The dielectric properties of the MnO2/LiTaO3 composite ceramics are significantly influenced by the MnO2 contents, and the relatively optimal values are obtained when the addition of 3 wt% MnO2 sintered in N2.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Vertical jetting induced by shear horizontal leaky surface acoustic wave on 36° Y-X LiTaO310.1063/1.4982073 ↗
2. Incipient plasticity and surface damage in LiTaO3 and LiNbO3 single crystals10.1016/j.matdes.2018.04.082 ↗
3. Processing and properties of Eu3+:LiTaO3 transparent glass–ceramic nanocomposites10.1111/j.1551-2916.2009.03151.x ↗
4. Efficient optical parametric oscillation based on periodically poled 1.0mol% MgO-doped stoichiometric LiTaO310.1063/1.1828211 ↗
5. Strength distribution and fracture analyses of LiNbO3 and LiTaO3 crystals under biaxial loading10.1016/j.jeurceramsoc.2017.02.002 ↗
6. Raman scattering efficiency in LiTaO3 and LiNbO3 crystals10.1103/PhysRevB.91.224302 ↗
7. Electrical conduction in nanodomains in congruent lithium tantalate single crystal10.1063/1.4863754 ↗
8. Formation mechanism and elimination methods for anti-site defects in LiNbO3/LiTaO3 crystals10.1039/C6CE01306F ↗
9. Coupled orbital angular momentum conversions in a quasi-periodically poled LiTaO3 crystal10.1364/OL.41.001169 ↗
10. Three-wavelength green laser using intracavity frequency conversion of Nd:Mg:LiTaO3 with a MgO: PPLN crystal10.1007/s00340-014-5933-8 ↗
11. Electrical properties of Mg-doped LiTaO3 ceramics10.1016/j.materresbull.2004.08.008 ↗
12. Effects of CaTiO3 on electrical properties in LiTaO3 ceramics10.1080/00150190490457690 ↗
13. Experimental and theoretical study of the density of Cu-doped LiTaO310.1007/s11082-016-0550-x ↗
14. Sintering mechanism and dielectric properties LiTaO3 matrix composites with the addition of Al2O3 particles10.1016/j.ceramint.2009.03.035 ↗
15. Powder synthesis and properties of LiTaO3 ceramics10.1016/j.apt.2014.01.011 ↗
16. New oxyfluorides and highly densified ceramics related to LiNbO310.1016/0022-3697(89)90060-7 ↗
17. Room-temperature magnetism realized by doping Fe into ferroelectric LiTaO310.1088/0256-307X/31/1/017501 ↗
18. Processing of crack-free high density polycrystalline LiTaO3 ceramics10.1007/s10854-016-5980-5 ↗
19. The upper Manganese doping limit and its effects on physical properties of lead-free Bi0.5Na0.5TiO3 ceramics10.1016/j.ceramint.2018.04.082 ↗
20. Improved thermal stability of ferro/piezo- electric properties of Mn-doped Pb(In1/2Nb1/2)O3- PbTiO3 ceramics10.1016/j.jeurceramsoc.2018.02.040 ↗
21. Structural, optical and dielectric study of Mn doped PrFeO3 ceramics10.1016/j.vacuum.2013.06.014 ↗
22. Sintering LiTaO3 and KTaO3 with the aid of manganese oxide10.1007/BF01120051 ↗
23. Microstructure and mechanical properties of Al2O3 particle reinforced LiTaO3 piezoelectric ceramic matrix composites10.1016/j.msea.2006.10.058 ↗
24. Microstructure, dielectric and ferroelectric properties of 0.94Bi0.5Na0.5TiO3–0.06BaTiO3(NBTB) and 0.05BiFeO3–0.95 NBTB ceramics: effect of sintering atmosphere10.1016/j.jallcom.2010.10.055 ↗
25. Dielectric and piezoelectric properties of (Ba0.95Ca0.05)(Ti0.88Zr0.12)O3 ceramics sintered in a protective atmosphere10.1016/j.jeurceramsoc.2009.06.034 ↗
26. Effect of TiO2 addition on the densification behavior, microstructure and mechanical properties of Al2O3-Cr cermets prepared via vacuum sintering10.1016/j.vacuum.2017.09.013 ↗
27. Effect of sintering atmosphere on the densification behavior of hot pressed TiN ceramics10.1016/j.ceramint.2013.03.062 ↗
28. Temperature-related changes in the structure of YSAG:Yb garnet solid solutions with high Sc3+ concentration10.1016/j.jeurceramsoc.2019.07.041 ↗
29. Synthesis and characterization of single-crystalline phase Li-α-Sialon10.1016/j.ceramint.2011.12.050 ↗
30. Characterization of partially densified 3D-Cf/SiC composites by using mercury intrusion porosimetry and nitrogen sorption10.1016/j.ceramint.2006.11.015 ↗
31. Structural studies of manganese stabilised lead- zirconate-titanate10.1080/00150198308009056 ↗
32. X-ray photoelectron spectroscopy: towards reliable binding energy referencing10.1016/j.pmatsci.2019.100591 ↗
33. External standards in X-ray photoelectron spectroscopy. Comparison of gold, carbon, and molybdenum trioxide10.1021/ac60330a037 ↗
34. Defect structure, ferroelectricity and piezoelectricity in Fe/Mn/Cu-doped K0.5Na0.5NbO3 lead-free piezoelectric ceramics10.1016/j.jeurceramsoc.2018.07.019 ↗
35. Universal dielectric relaxation induced giant dielectric permittivity in Mn-doped PbZrO3 ceramics10.1016/j.ceramint.2019.02.096 ↗
36. Dielectric relaxation and Maxwell-Wagner interface polarization in Nb2O5 doped 0.65BiFeO3-0.35BaTiO3 ceramics10.1063/1.4977107 ↗
37. The effect of sintering temperature on the crystalstructure and microwave dielectric properties of CaCoSi2O6 ceramic10.1016/j.matchemphys.2018.12.027 ↗
38. Modified crystal structure, dielectric properties, and magnetic phase transition temperature of Ca doped BiFeO3 ceramic10.1007/s10971-017-4541-6 ↗
39. Dielectric, ferroelectric and electro- mechanical properties of (1−x)(Bi0.5Na0.5TiO3)–xBa(Ti0.8Zr0.2)O3 ceramics10.1007/s10854-019-01414-w ↗
40. Improvement of quality factor of SrTiO3 dielectric ceramics with high dielectric constant using Sm2O310.1111/jace.16415 ↗
41. Magnesium fluoride doped MgTiO3 ceramics with ultra-high Q value at microwave frequencies10.1016/j.jallcom.2019.06.207 ↗
42. Effect of microstructure on the microwave properties in dielectric ceramics10.1016/S0955-2219(01)00342-9 ↗
43. Synthesis of flower-like reduced graphene oxide–Mn3O4 nanocomposite electrodes for supercapacitors10.1007/s00339-018-2024-4 ↗
44. Ferroelectric and optical modulations of double perovskite Ba2BiVO610.1016/j.molstruc.2019.04.043 ↗
45. Effect of Mn-doping on the structure and electrical properties of (Pb0.325Sr0.675 )TiO3 ceramics10.1016/j.ceramint.2018.06.092 ↗
46. Effects of NaSbO3 on phase structure and electrical properties of K0.5Na0.5NbO3–LiTaO3–NaSbO3 piezoelectric ceramics10.1007/s10854-012-0834-2 ↗
47. Investigations on dielectric, electrical and ferroelectric properties of xBaTiO3–(1−x)NiFe2O4 multiferroic composite ceramics10.1007/s00339-019-2921-1 ↗