Thin films deposition with ECR planar plasma source
Source abstract
Abstract
Abstract The results of film deposition of pure tungsten as well as intermetallic compound of NdFeB type on various substrates using planar ECR plasma source (with multipole magnetic field) developed in our laboratory are presented. The frequency of 2.45 GHz was generated within the magnetic system by two-slot antenna. The ions of ECR argon plasma are used for target sputtering. The main plasma parameters are density ∼10 10 cm −3 , T e ∼15 eV, ions energy ∼20 eV, ion current density ∼3.5 mA/cm 2 at the ultimate magnetron power. Under sputtering of Nd 8 Fe 86 B 6 target the amorphous films with high adherence and thickness of 5 μm were formed on the substrate. The deposition rate of tungsten films (target biasing ∼900 V) was 0.59 nm/s. The fine-grained films with high adhesion were obtained. They were tested against heat loads up to 100 J/cm 2 produced under irradiation of coatings with plasma streams.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties of Alloys · Rare-earth and actinide compounds · Metallurgical and Alloy Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Waits · J Vac Sci Technol · 1978 · 15 · 18810.1116/1.569451 ↗
2. Plasma ion implantation at Hughes Research Laboratory10.1116/1.587358 ↗
3. Kim · IEEE Trans Plasma Sci · 1995 · 2310.1109/27.476489 ↗
4. Lyneis · Nucl Instrum Methods · 1985 · B10/11 · 77510.1016/0168-583X(85)90105-3 ↗
5. Schrefl · J Magn Magn Mater · 1993 · 127 · 23710.1016/0304-8853(93)90042-Z ↗
6. Skomski · Phys Rev · 1993 · B48 · 1581210.1103/PhysRevB.48.15812 ↗
7. Neu · J Appl Phys · 2001 · 90 · 154010.1063/1.1380223 ↗
8. Jin · J Appl Phys · 2002 · 91 · 816510.1063/1.1446118 ↗
9. Bohm · Rev Sci Instrum · 1993 · 64-1 · 3110.1063/1.1144398 ↗
10. Krall NA, Trivelpiece AW. Principles of plasma physics. New York; 1973.10.1119/1.1987587 ↗