journal article·2016-01

Investigation on morphology and evolution process of plasma induced pitting damage during the ICP etching of fused silica

Xiaolong Jiang, Ying Liu, Bilali Muhutijiang, Zhengkun Liu, Keqiang Qiu, Xiangdong Xu, Yilin Hong, Shaojun Fu

Vacuum· Volume 123
Publisher page

Abstract

Abstract In this paper, we systematically investigate the morphological characteristics and evolution process of plasma induced pitting damage (PIPD) during the inductively coupled plasma (ICP) etching of fused silica with subsurface damage (SSD). Plasma induced pits are found to have uniform diameter as opposed to SSD induced pits. PIPD evolves differently in physical and reactive etching. In physical etching, the pit diameter increases linearly with etching time due to the etching of pit sidewall, while the depth remains constant. In CHF3 plasma, depth also increases with etching time. This is due to the redistribution of F-based etchant caused by the pit sidewall, which enhances the local etching rate at the pit bottom. The fact that with increasing etching time the diameter increases linearly but remains uniform implies that all the pits are generated at the same time. More particularly, the fitted line suggests that PIPD forms at the beginning of plasma process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Plasma Diagnostics and Applications · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. NIF optical materials and fabrication technologies: an overview10.1117/12.538471 ↗
2. Combined advanced finishing and UV-laser conditioning for producing UV-damage-resistant fused silica optics10.1117/12.461725 ↗
3. Optimized condition for etching fused-silica phase gratings with inductively coupled plasma technology10.1364/AO.44.004429 ↗
4. High-speed Ultrasmooth Etching of Fused Silica Substrates in SF6, NF3, and H2O-Based Inductively Coupled Plasma Process.10.1109/JMEMS.2014.2359292 ↗
5. The morphology and chemistry evolution of fused silica surface after Ar/CF4 atmospheric pressure plasma processing10.1016/j.apsusc.2013.09.100 ↗
6. The effect of RIE-modified surface contamination on optical10.1117/12.2020381 ↗
7. Inductively coupled plasma etching of Ge-doped boron-phosphosilicate glass for planar lightwave circuit devices10.1016/S0022-3093(99)00507-4 ↗
8. Formation of plasma induced surface damage in silica glass etching for optical waveguides10.1063/1.1739525 ↗
9. Optimum reactive ion etching of x-cut quartz using SF6 and Ar10.1088/0960-1317/23/11/117002 ↗
10. High speed anisotropic etching of Pyrex® for microsystems applications10.1016/j.jnoncrysol.2005.11.063 ↗
11. Optimum inductively coupled plasma etching of fused silica to remove subsurface damage layer10.1016/j.apsusc.2015.07.168 ↗
12. Sub-surface mechanical damage distributions during grinding of fused silica10.1016/j.jnoncrysol.2006.09.012 ↗
13. The effect of HF/NH4 etching on the morphology of surface fractures on fused silica10.1016/j.jnoncrysol.2009.01.037 ↗
14. Development of a general surface contour by ion erosion. Theory and computer simulation10.1007/BF00761792 ↗
15. Evolution of well-defined surface contour submitted to ion bombardment: computer simulation and experimental investigation10.1007/BF00541031 ↗
16. Gas-surface dynamics and profile evolution during etching of silicon10.1103/PhysRevLett.77.3049 ↗
17. Roughening in plasma etch fronts of Si (100)10.1103/PhysRevLett.82.4882 ↗