Metrological properties of an ionization gauge with carbon nanotube cathode in different gases
Source abstract
Abstract
Abstract A novel CNT-cathode ionization gauge was developed in this work, and its vacuum metrological characteristics in different gases were studied systematically. A good measurement linearity between normalized ion current and gas pressure is achieved from 10−8 to 10−4 Pa in N2, H2, O2 and air, respectively, and the linear response region for He only lies in the range from 10−7 to 10−4 Pa. The lowest measureable pressure with this gauge is about 1 × 10−8 Pa in O2 gas, which is one order of magnitude lower than the reported same gauge type with CNTs cathode. It is also found that the gauge sensitivities are closely dependent upon gas species and anode voltage, and a high sensitivity factor as high as 0.205 Pa−1 is acquired for N2 under an anode voltage of 300 V, which is the first reported CNT-cathode ionization gauge whose sensitivity is higher than the parent hot cathode one.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical and Optical Resonators · Carbon Nanotubes in Composites · Electrostatic Discharge in Electronics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Nanotube field electron emission:principles, development, and applications10.1088/0957-4484/26/24/242001 ↗
2. Optimum design for the carbon nanotube based micro-focus x-ray tube10.1016/j.vacuum.2014.10.009 ↗
3. An overview of ionization gauges with carbon nanotube cathodes10.1088/0022-3727/48/47/473001 ↗
4. Ionization vacuum gauge with a carbon nanotube field electron emitter combined with a shield electrode10.1016/j.vacuum.2009.06.016 ↗
5. A vacuum sensor using field emitters made by multiwalled carbon nanotube yarns10.1016/j.vacuum.2011.04.027 ↗
6. Field emitter-based vacuum sensors10.1016/j.vacuum.2011.08.008 ↗
7. Investigation of an extractor gauge modified by carbon nanotubes emitter grown on stainless steel substrate10.1016/j.vacuum.2015.10.016 ↗
8. New-type planar field emission display with superaligned carbon nanotube yarn emitter10.1021/nl3003792 ↗
9. Carbon nanotubes as cold cathodes10.1038/437968a ↗
10. Design of a multi-walled carbon nanotube field emitter with micro vacuum gauge10.1186/1556-276X-8-143 ↗
11. A saddle-field gauge with carbon nanotube field emitters10.1016/j.diamond.2005.06.016 ↗
12. Improved metrological characteristics of carbon-nanotube-based ionization gauge10.1063/1.2431460 ↗
13. Improved field emission properties of MgO-nanoparticle-doped carbon nanotube films and their application in miniature vacuum gauges10.1002/pssa.201228415 ↗
14. A low-vacuum ionization gauge with HfC-modified carbon nanotube field emitters10.1063/1.2909467 ↗
15. On-chip electron-impact ion source using carbon nanotube field emitters10.1063/1.2715457 ↗
16. Lotz M, Wilfert S, Kester O. Development of a field emitter-based extractor gauge for the operation in cryogenic vacuum environments. Proceedings of IPAC2014, Dresden, Germany.
17. Determination of the ionization gauge sensitivity using the relative ionization cross-section10.1016/0042-207X(75)90491-1 ↗
18. Sensitivity factor of the axial-symmetric transmission gauge: deviation and long-term variation10.1116/1.2715956 ↗
19. Raman spectroscopy of carbon nanotubes10.1016/j.physrep.2004.10.006 ↗
20. Raman spectroscopy of carbon nanotubes in 1997 and 200710.1021/jp071378n ↗
21. Patole · Carbon · 2011 · 49 · 352210.1016/j.carbon.2011.04.051 ↗
22. Synthesis of aligned carbon nanotubes10.1016/j.carbon.2011.06.090 ↗
23. Field emission from single and few-layer graphene flakes10.1063/1.3579533 ↗
24. The efficiencies of ionization and ionization potentials of various gases under electron impact10.1103/PhysRev.39.270 ↗
25. The ionization of helium, neon, and argon by electron impact10.1103/PhysRev.36.1293 ↗
26. http://www.thinksrs.com/downloads/PDFs/ApplicationNotes/IG1BAGapp.pdf.