journal article·2004-06

Influence of deposition parameters in the fabrication of a large-area narrow band-pass filter of bandwidth on subnanometer scale

Cheng-Chung Lee, Sheng-Hui Chen

Vacuum· Volume 74· Issue 3-4
Publisher page

Abstract

Abstract A narrow band-pass filter of subnanometer bandwidth is extremely sensitive to errors in the layer thickness and the optical constant of composite layers. For a filter made by vacuum deposition, such an error may be due to small fluctuations in deposition parameters. The distribution and deposition rate of the evaporating species, the distribution of ion current density and the ion voltage of the ion beam, the vacuum conditions, the wobbling of rotating substrate and the substrate temperature are all important parameters when fabricating such delicate filters. This work analyzes the role of these parameters in fabricating a large-area narrow band-pass filter of bandwidth on a subnanometer scale. The technique of shaping tooling factor (STF) was then applied to enlarge the useful coating area. Filters for dense wavelength division multiplexing (DWDM) systems with useful coated areas of larger than 1800 mm 2 (for 100 GHz filters) and 300 mm 2 (for 50 GHz filters) were fabricated. Experimental results indicate that the pass bandwidths at −0.3 dB exceeded 0.5 and 0.25 nm for 100 and 50 GHz filters, respectively, and the stop bandwidths at −25 dB were less than 1.1 and 0.6 nm, respectively. Moreover, the ripple of all these filters was less than 0.2 dB.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced MEMS and NEMS Technologies · Surface Roughness and Optical Measurements · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. ITU-T G.692
2. Bellcore GR-2883, Generic requirements for fiber optic filters. 1995, SECT.4.2 environment criteria, Bell Communications Research, Inc.
3. Lee CC, Chen SH, Hsu JC, Kuo CC, Wei CY. Improvement of the uniformity for the coating of DWDM filters. Society of Vacuum Coater Techinical Conference, O-15; San Francisco, USA, May 4–7, 2003.
4. Macleod · 2001
5. Macleod HA. Tutorial on the design of telecommunication filters. OSA, Optical Interference Coatings Conference, Banff, Alberta, Canada, July 15–20, (P.WC1,) 2001.10.1364/OIC.2001.WC1 ↗
6. Wavelength-selective filters for single-mode fiber WDM spectrum using Fabry–Perot interferometers10.1364/AO.26.000430 ↗
7. Subnanometer bandwidth interference filter for optical filter communication system10.1364/AO.27.001385 ↗
8. Baumeister P. WDW bandpass design based upon the microwave bandpass analogy. OSA, Optical Interference Coatings Conference, Banff, Alberta, Canada, July 15–20, P.WC2, 2001.10.1364/OIC.2001.WC2 ↗
9. Automated design and sensitivity analysis of wavelength-division multiplexing filters10.1364/AO.41.003176 ↗
10. Achieving narrow bandpass filters which meet the requirements for DWDM10.1016/S0040-6090(01)01295-0 ↗
11. Bandwidth reduction technique for multilayer WDM bandpass filters
12. Cushing D. Bandpass filter for 45 degree angle with low polarization properties. OSA, Optical Interference Coatings Conference, P.WB3, Tucson, Arizona, USA, June 7–12, 1998.10.1364/OIC.1998.WB.3 ↗
13. Cushing D. Thin film interference filter for 45° of incidence side a glass prism with extremely low polarization dependence. Society of Vacuum Coater 43rd Annual Technical Conference and Proceedings, Denver, Colorado, USA, 2000; p. 252–7.
14. Temperature stability of thin-film narrow-bandpass filters produced by ion-assisted deposition10.1364/AO.34.000667 ↗
15. Cheng-Chung Lee. Optical thin film and coating technology (in Japanese). (2002 Japan: ULVAC; [chapter 12].)
16. Correction masks for thickness uniformity in large-area thin films10.1364/AO.39.001602 ↗
17. Macleod HA. Thin-film optical filters. 3rd ed., Bristol, Philadelphia: Institute of Physics Publishing; (2001 [chapter 11].)10.1201/9781420033236 ↗
18. Stevenson IC. Optimizing source location for control of thickness uniformity. Society of Vacuum Coater 41st Annual Technical Conference and Proceedings, 1998; p. 281–6.
19. Error compensation mechanisms in some thin-film monitoring systems10.1080/713819668 ↗
20. Zhou FQ, Zhou M, Pan JJ. Optical coating computer simulation of narrow bandpass filters for DWDM. OSA, Optical Interference Coatings Conference, Tucson, Arizona, USA, P.WB2, June 7–12, 1998.10.1364/OIC.1998.WB.2 ↗
21. Deakins D, Ferguson R. Influence of the substrate and deposition process on the accuracy of optical monitoring. Society of Vacuum Coater 45th Annual Technical Conference and Proceedings 2002. p. 256–60.
22. Surface optical coating by ion assisted deposition techniques10.1364/AO.28.002952 ↗
23. Layer uniformity obtained by vacuum evaporation10.1364/AO.28.002960 ↗