journal article·2018-09

Influence of heating mode on life reliability of a hollow cathode heater

Zhong-xi Ning, Xiao-yu Liu, Ya-nan Wang, Zhi-wei Zhao, Fu-feng Wang, Yan-lin Hu, Wei Mao, Yan Shen, Da-ren Yu

Vacuum· Volume 155
Publisher page

Abstract

Abstract The electric propulsion hollow cathode is a thermal electron emission device that can be used as an electron source and a neutralizer for aerospace electric propulsion systems. As a serial structure, the cathode's life reliability is the key to its application in orbit. The heater is used to start the hollow cathode, and short-circuit and open-circuit failure are important forms of hollow cathode failure. Herein, we compare multiple groups of constant voltage power supply mode (U mode) and traditional constant current power supply mode (I mode) for the same structural heater, and reliability analysis is performed using two-parameter Weibull distribution. The results show that under the constant voltage power supply mode, there is a negative feedback mechanism that increases the resistance of the heater, and the overall heating power decreases. This extends the heater's lifetime and reduces dispersion of resistance variations, leading to a substantial increase in the lifetime reliability of the heater in the constant voltage mode. Finally, we propose a current limiting method that starts when the constant voltage power supply is applied and solves the problem of excessive current surge when the heater starts.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Plasma Diagnostics and Applications · Radiation Effects in Electronics · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Effect of discharge parameters on pulse current during hall thruster start-up10.1016/j.vacuum.2016.11.026 ↗
2. Effect of the hollow cathode heat power on the performance of an hall-effect thruster
3. Influence of insert structure on hollow cathode discharge characteristics10.1109/TPS.2014.2340700 ↗
4. Equipment and processes of vacuum electron-ion plasma surface engineering10.1016/j.vacuum.2017.04.016 ↗
5. Nitrogen mass transfer and surface layer formation during the active screen plasma nitriding of austenitic stainless steels10.1016/j.vacuum.2017.11.022 ↗
6. Study of cathode current effect on the properties of CrAlSiN coatings prepared by LARC10.1016/j.vacuum.2017.01.029 ↗
7. The electron beam gun with thermionic hairpin-like cathode for welding and surface modifications10.1016/j.vacuum.2004.07.066 ↗
8. Current status of 5A Lab6 hollow cathode life tests in Lanzhou Institute of Physics, China, World Academy of science
9. T.R. Verhey, G.C. Soulas, J.A. Mackey, Heater Validation for the NEXT-c Hollow Cathodes, IEPC-2017-397.
10. Y. Ohkawa, Y. Hayakawa, H. Yoshida, K. Miyazaki, H. Nagano, S. Kitamura, Hollow cathode life test for the next-generation ion engine in JAXA, 30th Int. Electric Propulsion Conf. Florence, Italy, September 17-20, 2007, IEPC-2007-89:1-8.
11. Zakany · 1997
12. W.G. Tighe, K. Freick, K.-R. Chien, Performance Evaluation and Life Test of the XIPS Hollow Cathode Heater, Communications Electron Technologies, Inc, Torrance, CA, 90505. AIAA Paper 2005-4066.10.2514/6.2005-4066 ↗
13. G.C. Soulas, Status of Hollow Cathode Heater Development for the Space Station Plasma Contactor[R], AIAA Paper 94–3309.
14. D.A. Herman, L.R. Pinero, J.S. Sovey, NASA's Evolutionary Xenon Thruster (NEXT) Component Verification Testing, AIAA Paper 2008-4812.10.2514/6.2008-4812 ↗
15. Study on the evaluation of the ignition reliability for ion thruster's hollow cathode
16. Compact lanthanum hexaboride hollow cathode10.1063/1.3474921 ↗
17. Boride cathodes10.1063/1.1699946 ↗
18. Coaxial-heater hollow cathode10.1063/1.4986111 ↗
19. Examination of a 5A-class cathode with a LaB6 falt disk emitter in the 2A-20A current range10.1016/j.vacuum.2017.09.021 ↗
20. M.L. Plasek, C.J. Wordingham, Sebasti´an Rojas Mata, N. Luzarraga, E.Y. Choueiri, J.E. Polk, Experimental investigation of a large-diameter cathode, 50th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, Cleveland (OH), U.S.A, AIAA 2014-3825, July 28–30, 2014, 1–14.
21. Experimental investigation on heaterless hollow cathode cold ignition characteristic
22. Wang · 2017 · 26
23. Using a hydrogen gas torch to seal edges of vacuum glazing panels and analysis of the related characteristic strength according to the sealed edges shapes10.1016/j.vacuum.2018.01.005 ↗
24. Aimin · 2006 · 13
25. Patterson · 2001
26. A. Mathers, Development of a high power cathode heater, 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 21–23 July 2008, Harford, CT, AIAA 2008-4815:1–7.10.2514/6.2008-4815 ↗
27. 20 cm xenon ion engine hollow cathode 3000 hours life-test