Improvement in salt-water durability of Ag thin films deposited by magnetron sputtering using argon and nitrogen mixed gas
Source abstract
Abstract
Abstract Ag thin films were deposited by magnetron sputtering in a mixture of argon and nitrogen. The salt-water durability and reflectance of Ag thin films were investigated as a function of nitrogen gas flow ratio during sputter deposition. The reflectance of as-deposited Ag thin films decreased with increasing nitrogen gas flow ratio; however, the difference in visible-light reflectance between the Ag thin films deposited with and without nitrogen was less than 1%. The reflectance of Ag thin films that were deposited using pure argon significantly decreased after the films were soaked in salt water. In contrast, the salt-water durability of Ag thin films was improved when the nitrogen gas flow ratio was increased. X-ray diffraction and atomic force microscopy analyses revealed that the Ag thin films deposited in sufficient nitrogen exhibited smooth surfaces and small crystallite sizes. Hence, the agglomeration of Ag thin films was suppressed; as a consequence, the reflectance of Ag thin films deposited in nitrogen did not decrease to the same extent, despite being soaked in salt water.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper Interconnects and Reliability · ZnO doping and properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. High efficiency front and rear surface silver reflectors10.1016/0040-6090(88)90506-8 ↗
2. Improvement in the efficiency of amorphous silicon solar cells utilizing the optical confinement effect by means of a TiO2/Ag/SUS back-surface reflector10.1016/0379-6787(84)90099-1 ↗
3. An investigation of the durability of front surface Ag mirrors using oxide protecting layers10.1016/0042-207X(92)90128-J ↗
4. Shin N, Oyama T. Development of a silver-based front surface mirror. Proc. XX int. congresses on glass. Kyoto, Japan; 2004. P-06-001.
5. Optical and electrical properties of pure Ag and Ag-based alloy thin films prepared by RF magnetron sputtering10.1016/S0042-207X(02)00122-7 ↗
6. Hiruma T. Laminated body for reflection film. WIPO Patent 2007; 2007/013269.
7. Thermal stability of tungsten-titanium diffusion barriers for silver metallization10.1016/j.tsf.2008.03.021 ↗
8. Encapsulated silver for integrated circuit metallization10.1016/S0927-796X(03)00025-1 ↗
9. Sputtered silver-based low-emissivity coatings with high moisture durability10.1016/S0042-207X(00)00349-3 ↗
10. Corrosion of titanium-nitride encapsulated silver films exposed to a H2S ambient10.1016/S0040-6090(98)01094-3 ↗
11. Thermal stability of Ag films in air prepared by thermal evaporation10.1016/j.apsusc.2007.02.058 ↗
12. Growth of Ag films on polyethylene terephthalate (PET) deposited by electron beam10.1016/j.tsf.2005.08.278 ↗
13. Surface analysis of silver mirrors made from organometallic solutions10.1016/0165-1633(84)90044-3 ↗
14. Electrodeposition of thin Pd-Ag films10.1016/0257-8972(93)90005-9 ↗
15. Agglomeration suppression behavior and mechanisms of Ag-Cu and Ag-Nb thin films10.1016/j.vacuum.2009.06.015 ↗
16. Aggregation in thin-film silver: Induced by chlorine and inhibited by alloying with two dopants10.1016/j.corsci.2009.06.044 ↗
17. 2004