journal article·2015-12

Outgassing rate measurements with the difference method in the framework of EMRP IND12

V. Hauer, K. Battes, M. Flämmich, V. Ierardi, K. Jousten, J. Šetina

Vacuum· Volume 122
Publisher page

Abstract

Abstract A new outgassing rate facility applying the difference method was established at KIT. This system was validated within the framework of Joint Research Project IND 12 of the European metrology Research programme by several outgassing reference probes. These served as transfer standards for comparison with three other outgassing rate systems available in the project. Two of the probes were newly developed reference devices and exhibit a known, constant outgassing rate of water. Further two probes were also newly developed outgassing reference devices which emit mixtures of gases. Additionally another probe was an elastomer which was loaded with a known gas mixture. The last probe was a commercially available plastic material whose outgassing shows a large spectrum of gases. The other outgassing rate facilities applied the in-situ calibration of quadrupole mass spectrometers by a primary method, the continuous expansion method (Physikalisch-Technische Bundesanstalt) and the known gas quantity method (Institute of Metals and Technology) or the throughput method (VACOM company). The comparison of the results shows a satisfactory agreement between the measurements.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Scientific Measurement and Uncertainty Evaluation · Calibration and Measurement Techniques · Gas Dynamics and Kinetic Theory

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. Reinigung von Vakuumbauteilen für UHV- und UCV-Anwendungen10.1002/vipr.201200511 ↗
2. Recommended practices for measuring and reporting outgassing data10.1116/1.1496783 ↗
3. Measurements of partial outgassing rates10.1016/0042-207X(95)00250-2 ↗
4. Einsatz des Differenzverfahrens zur Gasabgabemessung kleiner metallischer Proben10.1002/vipr.19950070111 ↗
5. Ausgasungsmessungen von Metallen, Plasten und Kohlenstoff10.1002/vipr.19960080409 ↗
6. Patent pending DE 10 2014 200 907.3.10.1109/JDT.2014.2371555 ↗
7. Nano-holes as standard leak elements10.1016/j.measurement.2014.09.017 ↗
8. Outgassing rate measurements of stainless steels and polymers using the difference method10.1116/1.4905099 ↗