Mathematical simulation of the influence of ion-compensation, self-magnetic field and scattering on an electron beam during welding
Source abstract
Abstract
Abstract The determination of the position of minimal electron beam cross-section was carried out using two methods, one known as the Arata-Beam test and the other by measuring the beam diameter with the DIABEAM system. The comparison reveals differences in the position of minimal cross-section detected by these two methods. The scattering of the electron beam and its focusing by positive space charge of generated ions are possible reasons responsible for the change of the position of its minimal cross-section during welding. A mathematical model based on the solution of a modified trajectory equation for edge electrons taking into account the vapour expanding from the capillary into the vacuum and possible beam–vapour interaction mechanisms was developed in order to estimate quantitatively the influence of these effects on the beam focusing. The developed model reproduces the experimental results for low- and high-beam power and can be applied as a part of a general model of simulation of electron beam welding, which predicts the beam geometry close to a workpiece.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Plasma Diagnostics and Applications · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. Arata Y. Evaluation of beam characteristics by the ab test method. Plasma, electron and laser beam technology, Metals Park, Ohio/USA: American Society for Metals, 1986. p. 177–89.
2. Dilthey U, Boehm S, Dobner M, Traeger G. Comparability and replication of electron beam welding technology using new tools of the diabeam measurement device. Proceedings of the fifth International Conference on Electron Beam Technologies, Varna, Bulgaria, 1997. p. 76–83.
3. Study of the tool electron beam — part 1: Comparison between the arata test and diabeam measurement
4. Friedel K, Felba J. Effect of focusing upon bead shape reproducing in electron beam welding. Proceedings of the fourth International Colloquium on Welding and Melting by Electrons and Laser Beam, Cannes, France, 1988. p. 77–85.
5. Runge J, Eggers H. Werkstoffauswurf beim elektronenstrahlschweien. DVS-Berichte- 21, Duesseldorf: DVS-Verlag, 1971. p. 15–26.
6. Lawson · 1977
7. Mott NF, Massey HSW. Collisions of fast electrons with atoms xvi. In: The theory of atomic collisions, Oxford: Clarendon Press, 1965. p. 454–67.
8. Dilthey U, Boehm S, Goumeniouk A, Welters T, Nazarenko OK, Akopanz KS. The focussing of electron beam effected by ion compensation and self magnetic field. IIW-Doc. IV-702-98.
9. Potential distribution in a beam-generated plasma10.1063/1.1713016 ↗