Laser scanning patterns induced surface properties variations of Ti-V-Hf-Zr non-evaporable getter film with 316L stainless steel substrates
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Metal and Thin Film Mechanics · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Cooling challenges in a NEG-coated vacuum chamber of a light source10.1088/1742-6596/2420/1/012023 ↗
2. Brown · 2008
3. Vacuum chamber conditioning and saturation simulation tool (VacuumCOST): enabling time-dependent simulations of pressure and NEG sticking in UHV chambers10.1016/j.vacuum.2023.111992 ↗
4. Distributed pumping by non-evaporable getters in particle accelerators10.1109/TNS.1981.4332097 ↗
5. Development and characterization of non-evaporable getter thin films with Ru seeding layer for MEMS applications
6. Wafer-level vacuum package of two-dimensional micro-scanner10.1007/s00542-017-3668-2 ↗
7. UHV-ERDA investigation of NEG coatings10.1016/j.nimb.2010.02.114 ↗
8. Vacuum pumping study of titanium-zirconium-vanadium thin films10.1109/PAC.2003.1288992 ↗
9. Preparation and sorption characteristics of Zr–Co–RE getter films10.1016/j.jallcom.2012.01.030 ↗
10. Chapter 39 - outgassing and gettering
11. Surface characterization of activated Ti-Zr-V NEG coatings10.1016/j.vacuum.2008.08.002 ↗
12. Temperature-Dependent in situ studies of volatile molecule trapping in low-temperature-activated Zr alloy-based getters10.1021/acs.jpcc.6b11426 ↗
13. The characterisation of non-evaporable getters by Auger electron spectroscopy: analytical potential and artefacts10.1016/S0169-4332(02)00222-2 ↗
14. A novel route to extreme vacua: the non-evaporable getter thin film coatings10.1016/S0042-207X(98)00377-7 ↗
15. Influence of the substrate coating temperature on the vacuum properties of Ti-Zr-V non-evaporable getter films10.1016/S0042-207X(02)00755-8 ↗
16. Aging characteristics of Zr–V–Fe getters as observed by Mössbauer spectroscopy10.1016/S0022-3115(98)00612-6 ↗
17. Nonevaporable getter films for ultrahigh vacuum applications10.1116/1.580963 ↗
18. Characterization and evaluation of Ti-Zr-V non-evaporable getter films used in vacuum systems10.1016/j.phpro.2012.03.644 ↗
19. Vacuum properties of TiZrV non-evaporable getter films10.1016/S0042-207X(00)00246-3 ↗
20. Kinetics of hydrogen absorption in Zr-based alloys10.1016/j.jallcom.2013.01.104 ↗
21. Akiba · 1998 · vol. 6 · 461
22. Study of doped Cu on adjusting the TiZrV phase structure and improving the low temperature activated gettering performance10.1016/j.vacuum.2023.112569 ↗
23. Pumping properties of Ti–Zr–Hf–V non-evaporable getter coating10.1016/j.vacuum.2013.07.035 ↗
24. Stimulated gas desorption from TiZrV, Ag and Pd coating films in response to synchrotron radiation10.1016/j.vacuum.2022.111671 ↗
25. Synthesis of Ti-Zr-V non-evaporable getter thin films grown on Al alloy and CuCrZr alloy10.4028/www.scientific.net/KEM.730.87 ↗
26. Influence of deposition pressure and pulsed dc sputtering on pumping properties of Ti–Zr–V nonevaporable getter films10.1116/1.3112623 ↗
27. Review on laser-induced etching processing technology for transparent hard and brittle materials10.1007/s00170-021-07853-2 ↗
28. Low secondary electron yield engineered surface for electron cloud mitigation10.1063/1.4902993 ↗
29. Optimization of the secondary electron yield of laser-structured copper surfaces at room and cryogenic temperature10.1103/PhysRevAccelBeams.23.033101 ↗
30. Secondary electron ejection from the MgO protection layer in AC plasma display panels for low-energy noble ions10.1016/S0040-6090(03)00372-9 ↗
31. Low-energy ion-induced electron emission in metal-insulator-metal sandwich structures10.1103/PhysRevB.81.075411 ↗
32. Ion-induced kinetic electron emission from 6LiF, 7LiF and MgF2 thin films10.1088/1674-1056/19/8/083401 ↗
33. Electron cloud buildup and impedance effects on beam dynamics in the Future Circular e+ e- Collider and experimental characterization of thin TiZrV vacuum chamber coatings10.1103/PhysRevAccelBeams.21.111002 ↗
34. Resistive-wall impedance effects for the new KEK Light Source
35. Resistive-wall impedances of a thin non-evaporable getter coating on a conductive chamber
36. Interaction of highly charged ions with surfaces10.1071/PH960527 ↗
37. Atomic and ionic impact phenomena on metal surfaces10.1063/1.3048356 ↗
38. Auger-electron emission from slow, highly charged ions interacting with solid Cu targets10.1103/PhysRevA.45.4653 ↗
39. Theory of auger ejection of electrons from metals by ions10.1103/PhysRev.96.336 ↗
40. Electron emission from a metal surface bombarded by highly charged ions10.1016/0039-6028(88)90627-9 ↗
41. Microwave surface resistance measurement of hts films using dielectric resonators10.1016/j.physc.2006.07.004 ↗
42. Measurement method of microwave surface resistance of high Tc superconductive thin films10.1016/S0921-4534(02)02065-8 ↗
43. Impact of sample storage type on adventitious carbon and native oxide growth: X-ray photoelectron spectroscopy study10.1016/j.vacuum.2022.111463 ↗
44. A step-by-step guide to perform x-ray photoelectron spectroscopy10.1063/5.0086359 ↗
45. X-ray photoelectron spectroscopy: towards reliable binding energy referencing10.1016/j.pmatsci.2019.100591 ↗
46. X-ray photoelectron spectroscopy of thin films10.1038/s43586-023-00225-y ↗
47. Intensified plasma-assisted nitriding of AISI 316L stainless steel10.1016/S0257-8972(02)00403-6 ↗
48. Refined microstructure and enhanced mechanical properties of AlCrFe2Ni2 medium entropy alloy produced via laser remelting10.1016/j.jmst.2021.05.033 ↗
49. Effect of Nb addition on the microstructure and corrosion resistance of ferritic stainless steel10.1007/s00339-020-3383-1 ↗
50. Achieving high strength 316L stainless steel by laser directed energy deposition-ultrasonic rolling hybrid process10.1016/j.msea.2024.146665 ↗
51. Grain refinement and high thermal stability in laser surface remelted Mg-4Y-3Nd-1.5Al alloy10.1016/j.scriptamat.2022.115000 ↗
52. ISO 25178 standard for three-dimensional parametric assessment of surface texture10.3103/S1068798X17060053 ↗
53. Application of ISO 25178 standard for multiscale 3D parametric assessment of surface topographies10.1088/1755-1315/275/1/012011 ↗
54. Wang · 2018
55. The activation of Ti-Zr-V-Hf non-evaporable getter films with open-cell copper metal foam substrates
56. Testing the activation temperature of non-evaporable Ti-Zr-Hf-V getter films by XPS10.1016/j.nima.2020.163864 ↗
57. C 1s peak of adventitious carbon aligns to the vacuum level: dire consequences for material's bonding assignment by photoelectron spectroscopy
58. Critical method evaluation refutes the Ar 2p signal of implanted Ar for referencing X-ray photoelectron spectra10.1016/j.apsusc.2023.157598 ↗
59. Compromising science by ignorant instrument calibration—need to revisit half a century of published XPS data
60. The same chemical state of carbon gives rise to two peaks in X-ray photoelectron spectroscopy10.1038/s41598-021-90780-9 ↗
61. A review on C1s XPS-spectra for some kinds of carbon materials10.1080/1536383X.2020.1794851 ↗
62. Calibration of binding energy positions with C1s for XPS results10.1007/s11595-020-2312-7 ↗
63. Preparation and properties of chromium protective coatings on lithium targets for accelerator-based neutron sources10.1016/j.vacuum.2024.113151 ↗
64. Self-consistent modelling of X-ray photoelectron spectra from air-exposed polycrystalline TiN thin films10.1016/j.apsusc.2016.06.012 ↗
65. Photoelectron spectroscopy study of stoichiometric and reduced anatase TiO2(101) surfaces: the effect of subsurface defects on water adsorption at near-ambient pressures10.1021/acs.jpcc.5b02732 ↗
66. Activation and pumping characteristics of Ti–Zr–V films deposited on narrow tubes10.1007/s41365-021-00880-4 ↗
67. Surface chemistry of plasma deposited ZrC hard coatings
68. Electrochromism in some thin‐film transition‐metal oxides characterized by x‐ray electron spectroscopy10.1063/1.324349 ↗
69. Introduction: vanadium, its compounds and applications, vanadium catalysis
70. Vanadium oxides: synthesis, properties, and applications
71. RRR of copper coating and low temperature electrical resistivity of material for TTF couplers10.1016/j.physc.2006.03.049 ↗
72. On the synergy manipulation between the activation temperature, surface resistance and secondary electron yield of NEG thin films