Oxidation resistance and thermal stability of (MoZrHfTaNb)-Si-B coatings deposited by HIPIMS method with different Ar pressure
Source abstract
Abstract
The influence of argon pressure on the structure, mechanical characteristics , oxidation resistance , and thermal stability of (MoTaNbZrHf)-Si-B coatings deposited by HIPIMS method using a composite target based on high-entropy (MoZrHfTaNb)Si 2 silicide and (MoZrHfTaNb)B 2 boride was studied. Coatings deposited at Ar pressure of 0.1–0.2 and 1.3–2.2 Pa had a dense, defect-free structure. Increasing the Ar pressure to 37–42 Pa led to the formation of a coating with a columnar structure, while, according to X-ray diffraction and transmission electron microscopy , all coatings were amorphous . Increasing the Ar pressure from 0.1 to 0.2 to 37–42 Pa led to a magnifying the growth rate of coatings in 2.5 times. All coatings were characterized by a similar hardness of 14–15 GPa. The elastic modulus and elastic recovery decreased from 196 to 178 GPa and from 40 to 34 % when the argon pressure increased from 0.1 to 0.2 to 37–42 Pa, respectively. The coatings successfully resisted oxidation at temperatures of 1100 °C and 1300 °C. The protective properties of the coatings are due to the formation of a dense oxide film based on a-Si:B:O amorphous phase with crystallites of the m-HfO 2 , m-ZrO 2 , m-Nb 2 O 3 , o-Ta 2 O 5 , t-ZrSiO 4 and t-HfSiO 4 phases. Heating in a TEM column showed that the coating deposited at an Ar pressure of 0.1–0.2 Pa crystallizes immediately upon reaching a temperature of 700 °C with the release of predominantly the h-MoSi 2 phase. Crystallization of the coating obtained at an Ar pressure of 37–42 Pa also occurs at 700 °C, but only during long-term exposure and is accompanied by the precipitation of the h-Ta 5 Si 3 and t-Nb 5 Si 3 phases. Thus, it has been shown that by increasing the gas flow rate, the productivity of sputtering in the HIPIMS mode can be increased without a significant loss in hardness, oxidation resistance and thermal stability of coatings.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Oxidation behaviour and mechanical properties of sputter-deposited TMSi2 coatings (TM = Mo, Ta, Nb)10.1016/j.jallcom.2022.167532 ↗
2. Influence of vacancy on the elastic properties, ductility and electronic properties of hexagonal C40 MoSi2 from first-principles calculations10.1016/j.vacuum.2020.109438 ↗
3. Comparative studies of the oxidation of MoSi2 based materials: low-temperature oxidation (300–900 °C)10.1016/j.ijrmhm.2017.02.001 ↗
4. Oxidation mechanisms in Mo-reinforced Mo5SiB2(T2)–Mo3Si alloys10.1016/S1359-6454(02)00039-3 ↗
5. Influence of Si on the oxidation behavior of TM-Si-B2±z coatings (TM = Ti, Cr, Hf, Ta, W)10.1016/j.surfcoat.2022.128178 ↗
6. Hot corrosion of Mo–Si–B coatings10.1007/s11085-017-9773-x ↗
7. Multifunctional high-temperature D5 MAI and M1 MAI coatings10.1134/S1990793109030087 ↗
8. Effects of doping with Zr and Hf on the structure and properties of Mo-Si-B coatings obtained by magnetron sputtering of composite targets10.1016/j.surfcoat.2022.128141 ↗
9. Structure, mechanical properties, and oxidation resistance of ZrB 2 , ZrSiB, and ZrSiB/SiBC coatings10.1134/S207020511806014X ↗
10. Structure and properties of Zr-Mo-Si-B-(N) hard coatings obtained by D.C. magnetron sputtering of ZrB2-MoSi2 target10.3390/ma14081932 ↗
11. Structure, oxidation resistance, mechanical, and tribological properties of N- and C-doped Ta-Zr-Si-B hard protective coatings obtained by reactive D.C. Magnetron sputtering of TaZrSiB ceramic cathode10.3390/coatings10100946 ↗
12. A review on High-Temperature Applicability: a milestone for high entropy alloys10.1016/j.jestch.2022.101211 ↗
13. Enhancing the strength of AlCrFeNi HEAs via tailoring aluminum content and optimal aging treatment10.1016/j.jallcom.2021.162242 ↗
14. Benefits of passive element Ti to the resistance of AlCrFeCoNi high-entropy alloy to corrosion and corrosive wear
15. High temperature oxidation and hot corrosion behaviors of Fe65.7Ni11.7Ti1Mo6.6Co15 high entropy alloy
16. Excellent thermal stability and mechanical properties of bulk nanostructured FeCoNiCu high entropy alloy10.1016/j.msea.2022.142670 ↗
17. A systematic investigations on effect of annealing temperature on magnetic properties of a promising soft magnetic Co35Cr5Fe10Ni30Ti20 HEA10.1016/j.jallcom.2022.167451 ↗
18. Magnetic properties, electrical resistivity, and hardness of high-entropy alloys FeCoNiPd and FeCoNiPt10.1016/j.jmmm.2022.170024 ↗
19. Evolution of structure and properties of multi-component (AlCrTaTiZr)Ox films10.1016/j.tsf.2009.10.142 ↗
20. High-entropy (HfTaTiNbZr)C and (HfTaTiNbMo)C carbides fabricated through reactive high-energy ball milling and spark plasma sintering10.1016/j.ceramint.2020.04.230 ↗
21. Nitride-reinforced HfNbTaTiV high-entropy alloy with excellent room and elevated-temperature mechanical properties10.1016/j.jmst.2022.12.010 ↗
22. Application of transition metal high entropy boride in electrocatalytic hydrogen evolution reaction10.1016/j.ijhydene.2023.01.305 ↗
23. Development and oxidation behavior of high entropy silicide (NbMoTaWV)Si2 coatings on NbMoTaWV alloy10.1016/j.jallcom.2022.165384 ↗
24. A novel of MSi2 high-entropy silicide: Be expected to improve mechanical properties of MoSi210.1016/j.matlet.2020.127629 ↗
25. A new C11b-type high entropy refractory metal silicide to improve MoSi2 mechanical properties more easily10.1016/j.scriptamat.2022.114798 ↗
26. Effects of Si additions on microstructures and mechanical properties of VNbTiTaSix refractory high-entropy alloys10.1016/j.jallcom.2021.163517 ↗
27. Refractory metal-based high entropy silicide-borides: the future of materials beyond MoSiB?10.1016/j.intermet.2022.107620 ↗
28. A review on high entropy alloys coatings: fabrication processes and property assessment10.1002/adem.201900343 ↗
29. Structure, stability, and properties of high-entropy alloys10.1134/S0031918X20080098 ↗
30. Mechanical properties and abrasive wear behaviour of Al-based PVD amorphous/nanostructured coatings10.1016/j.surfcoat.2016.12.031 ↗
31. High power pulsed magnetron sputtering: a review on scientific and engineering state of the art10.1016/j.surfcoat.2009.11.013 ↗
32. Effect of carbon content on the structural, mechanical and corrosion properties of TiC films deposited using a HiPIMS discharge10.1016/j.surfcoat.2022.129028 ↗
33. The structure and properties of high-entropy (MoTaNbZrHf)-Si-B coatings deposited by DCMS and HIPIMS methods using the multilayer target10.1016/j.surfcoat.2024.130797 ↗
34. Frequency effect on the structure and properties of Mo-Zr-Si-B coatings deposited by HIPIMS using a composite SHS target10.3390/coatings12101570 ↗
35. Optimization of HiPIMS discharges: the selection of pulse power, pulse length, gas pressure, and magnetic field strength
36. Influence of pulse frequency on microstructure and mechanical properties of Al-Ti-V-Cu-N coatings deposited by HIPIMS10.1016/j.surfcoat.2020.126514 ↗
37. The influence of pulse duration and duty cycle on the energy flux to the substrate in high power impulse magnetron sputtering10.1016/j.vacuum.2023.112459 ↗
38. Influence of the bias-voltage, the argon pressure and the heating power on the structure and the tribological properties of HiPIMS sputtered MoSx films10.1016/j.surfcoat.2020.125358 ↗
39. Elemental analysis of coatings by high-frequency glow discharge optical emission spectroscopy10.1134/S207020511205005X ↗
40. Role of mixing and milling in mechanochemical synthesis10.1134/S0036023621030116 ↗
41. High-power impulse magnetron sputter deposition of TiBx thin films: effects of pressure and growth temperature10.1016/j.vacuum.2019.108884 ↗
42. Gudmundsson · 2020 · 1
43. Effects of Ar pressure on ion flux energy distribution and ion fraction in r.f.-plasma-assisted magnetron sputtering
44. The influence of the deposition pressure on the composition and the mechanical properties of W–S–C coatings deposited by magnetron sputtering in semi-industrial conditions10.1016/j.vacuum.2020.109963 ↗
45. The microstructure of sputter-deposited coatings10.1116/1.573628 ↗
46. Influence of argon gas flow on mechanical and electrical properties of sputtered titanium nitride thin films10.1186/2251-7235-7-37 ↗
47. The effect of energy of Ar recoil particles on the interfaces and micro-structure in Ni/Ti multilayer fabricated by direct current magnetron sputtering technique10.1016/j.vacuum.2024.113186 ↗
48. The effect of the Ar/N2 gas ratio on the structure and properties of Ta-Si-N coatings produced by magnetron sputtering of TaSi2 target
49. Evolution of structure and mechanical properties of hard yet fracture resistant W‐B‐C coatings with varying C/W ratio10.1016/j.surfcoat.2018.02.054 ↗
50. Thermodynamic study on refractory metal silicides10.1016/j.jpcs.2004.06.062 ↗