Effect of the thermal annealing on the properties of RF sputtered Mo-AlNxOy composite thin films
Source abstract
Abstract
Abstract In the last few years, the concentrating solar power (CSP) systems have been studied and growing surprisingly in several countries. The science and technology involved to manufacture the special materials for these devices has been a determining factor for the system performance. Among these special materials, ceramic-metal composite (cermet) is an important class largely used as a main absorber in the selective surfaces of evacuated tube collectors. This work aims to manufacture Mo-AlN x O y thin films by magnetron sputtering technique. The parameter studied was the effect of annealing temperature (600oC-1100 °C) on the optical properties and surface morphology of the films. The results showed that the annealing (800-1100 °C) increase the absorptance, produces an oxidation in the bulk of the films and a breakage in the AlN surface bonds, reducing the initial quantity of nitrogen. It is noteworthy that the annealing at 600 °C did not alter the optical and morphology properties of the films, suggesting that the films of Mo-AlN x O y produced can be applied in selective surfaces in the future.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · Solar Thermal and Photovoltaic Systems · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. High-dielectric constant AlON prepared by RF gas-timing sputtering for high capacitance density10.1016/j.mssp.2008.07.012 ↗
2. Characterization of ALN thin films deposited by DC reactive magnetron sputtering
3. Microwave synthesis of aluminum oxynitride (ALON)10.1023/A:1006681732457 ↗
4. Analysis of multifunctional titanium oxycarbide films as a function of oxygen addition10.1016/j.surfcoat.2011.11.005 ↗
5. AlNxOy thin films deposited by DC reactive magnetron sputtering10.1016/j.apsusc.2010.08.076 ↗
6. A microstructural study of transparent metal oxide gas barrier films10.1016/S0040-6090(99)00461-7 ↗
7. Characterisation of aluminium oxynitride gas barrier films10.1016/S0040-6090(01)00836-7 ↗
8. Ion-assisted processing of optical coatings10.1016/0040-6090(91)90426-X ↗
9. Use of aluminum nitride for UV radiation dosimetry, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers10.1016/j.nima.2007.05.177 ↗
10. Yan · Influ. Mo Addit. Dielectr. Prop. AlN Ceram. matrix Compos. J. Phys. Conf. Ser. · 2009 · 152 · 012063
11. Braga · 2012 · 1
12. Structure and optical properties of Ag–Al2O3 nanocermet solar selective coatings prepared using unbalanced magnetron sputtering10.1016/j.solmat.2011.01.034 ↗
13. Preparation and characterization of high-toughness ZrB2/Mo composites by hot-pressing process10.1016/j.ijrmhm.2009.06.003 ↗
14. Influence of rapid thermal annealing on morphological and electrical properties of RF sputtered AlN films10.1016/j.mssp.2006.04.001 ↗
15. Massi · 1999 · 121
16. Industrially sputtered solar absorber surface10.1016/S0927-0248(98)00067-1 ↗
17. Totten · 2003
18. Nitrogen bonding, stability, and transport in AlON films on Si10.1063/1.1763230 ↗
19. Use of Tabulated Thermochemical Data for Pure Compounds10.1021/ed078p814 ↗
20. Influence of nitrogen content on properties of direct current sputtered TiOxNy films10.1002/pssa.200306707 ↗
21. Electrical properties of AlNxOy thin films prepared by reactive magnetron sputtering10.1016/j.tsf.2012.06.062 ↗
22. Kinetics and initial stages of oxidation of aluminum nitride: Thermogravimetric analysis and x-ray photoelectron spectroscopy study10.1116/1.574765 ↗
23. Oxygen Control on Nanocrystal-AlON Films by Reactive Gas-Timing Technique R.F. Magnetron Sputtering and Annealing Effect10.4028/www.scientific.net/AMR.55-57.573 ↗
24. Fabrication and properties of Al2O3 and AlN coatings for fusion reactor blanket by sputtering method10.1016/S0257-8972(98)00486-1 ↗
25. Statistical evaluation of refractive index, growth rate, hardness and Young's modulus of aluminium oxynitride films10.1016/S0040-6090(99)00564-7 ↗
26. Stoichiometry and characterization of aluminum oxynitride thin films grown by ion-beam-assisted pulsed laser deposition10.1016/j.tsf.2007.11.120 ↗
27. Influence of coating parameters on the structure and properties of Al2O3 layers reactively deposited by means of pulsed magnetron sputtering10.1016/S0257-8972(96)02992-1 ↗
28. Thermal conductivity of AlN thin films deposited by RF magnetron sputtering10.1016/j.mssp.2011.04.007 ↗
29. Thermal stability and chemical bonding states of AlOxNy/Si gate stacks revealed by synchrotron radiation photoemission spectroscopy10.1016/j.apsusc.2010.08.113 ↗
30. Preparation and rapid thermal annealing of AlN thin films grown by molecular beam epitaxy10.1016/j.ssc.2009.02.008 ↗
31. A study of the material loss and other processes involved during annealing of GaN at growth temperatures10.1016/j.cplett.2003.09.019 ↗
32. Kennedy · 2002 · 58
33. Materials for photothermal solar energy conversion10.1007/BF00700767 ↗
34. Optical and electronic properties of CrOxNy films, deposited by reactive DC magnetron sputtering in Ar/N2/O2(N2O) atmospheres10.1016/j.surfcoat.2005.02.181 ↗
35. Arvinte · 2011 · 118