journal article·2009-07

Improvement of a dual frequency sputtering device for higher deposition rates of protective zirconium oxide films on ceramics

Yasunori Ohtsu, Yuzuru Hino, Hiroharu Fujita, Morito Akiyama, Ken Yukimura

Vacuum· Volume 83· Issue 11
Publisher page

Abstract

Abstract Zirconium thin films have been applied as protective coating films on ceramics by dual frequency oxygen plasma sputtering [Y. Ohtsu et al., Surf Coat Technol, 196 (2005) 81], where they were certified to be effective in modifying the surface state of china and porcelain with the water-repellency and the stoichiometric value of atomic ratio O/Zr in films. However, the deposition rate with the former device was about 0.6 nm/min, lower compared with a conventional radio frequency magnetron plasma device. Improvement of the deposition rate has been investigated by optimization of the geometry in a dual frequency plasma-sputtering device using O 2 and Ar mixture gases. That is, the ratio of plasma volume to that of the vacuum chamber was changed from 8 to 44%. The high-deposition rate of about 7 nm/min was attained at O 2 gas concentration of 10%, under the optimization of the geometry. The films have also kept the high transparency of 90%. These results indicate that the advanced dual frequency plasma-sputtering device is an effective plasma source for producing protective layers for ceramics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Metal and Thin Film Mechanics · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. Structural and optical properties of thin zirconium oxide films prepared by reactive direct current magnetron sputtering10.1063/1.1503858 ↗
2. The evolution of thermal barrier coatings in gas turbine engine applications10.1115/1.2906801 ↗
3. Reactive magnetron sputtered zirconium oxide and zirconium silicon oxide thin films10.1116/1.576263 ↗
4. Optical coatings for laser fusion applications10.1016/0040-6090(80)90342-9 ↗
5. Preparation of zirconium oxide thin film using inductively coupled oxygen plasma sputtering10.1016/j.surfcoat.2004.08.102 ↗
6. Influence of ion-bombardment-energy on thin zirconium oxide films prepared by dual frequency oxygen plasma sputtering10.1016/j.surfcoat.2006.09.015 ↗
7. Lieberman · 1994
8. Characterization of zirconium oxynitride films obtained by radio frequency magnetron reactive sputtering10.1016/j.tsf.2007.02.033 ↗