journal article·2024-06Open access

The effect of energy of Ar recoil particles on the interfaces and micro-structure in Ni/Ti multilayer fabricated by direct current magnetron sputtering technique

Zhengran Guo, Zhong Zhang, Qiushi Huang, Runze Qi, Chenwei Du, Jiali Wu, Zhanshan Wang

Vacuum· Volume 224

Abstract

Ni/Ti multilayers have been therefore widely used in neutron optics devices because of their excellent reflective properties for neutrons, which is strongly dependent to their interfaces and microstructure. Hence, there have been many attempts to improve the interfaces and microstructure of Ni/Ti multilayers, for example reactive sputtering , interlayers and so on. In this paper, the influence of energy of Ar recoil particles on the interface and micro-structure of Ni/Ti multilayers were completed, through varying the sputtering pressure. Firstly, the Simulation present that the decreasing of sputtering pressure would enlarge the number recoil particle proportion. Secondly, three Ni/Ti multilayers were fabricated by direct current sputtering technique with variable sputtering pressures (0.080Pa, 0.120Pa, 0.199Pa). Thirdly, the grazing incidence X-ray reflectometry (GIXRR), diffusing scattering, X-Ray Diffraction (XRD), Transmission Electron Microscope (TEM) were used to characterize the interfaces and micro-structure of these films. The measured results present that their interfacial width and roughness were variable as diseasing the sputtering pressure, and the micro-structure of Ni layers transform from (111) only to both (111) and (100). These experimental results could result from the effects of energy of both Ar recoil particles and the Ni, Ti depositing atoms.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Ion-surface interactions and analysis · Fusion materials and technologies · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Experimental study on fabrication technique of a Ni/Ti supermirror using the electron beam evaporation system10.1080/18811248.1998.9733941 ↗
2. Development of Ni/Ti multilayer supermirrors for neutron optics10.1016/0040-6090(94)90739-0 ↗
3. Development of neutron supermirror with large-scale ion-beam sputtering instrument10.1016/j.physb.2006.06.024 ↗
4. Flux gain for a next-generation neutron reflectometer resulting from improved supermirror performance10.1007/s003390201724 ↗
5. Effect of sputtering pressure on the structure and solid‐state reaction of titanium‐nickel compositionally modulated film10.1063/1.338413 ↗
6. Mechanical and structural properties of Ni/Ti multilayers and films: an application to neutron supermirrors10.1063/1.368996 ↗
7. Study of ion-beam-sputtered Mo/Si mirrors for EUV lithography mask: influence of sputtering gas[A]
8. Reflectivity improvements for neutron mirrors and supermirrors[A]
9. Effect of sputtering pressure and temperature on DC magnetron sputtered CrN films10.1179/174329409X389326 ↗
10. Effect of sputtering deposition process on magnetic properties of magnetic multilayers10.1143/JJAP.47.7879 ↗
11. Interface roughness effects on the surface anisotropy in Co/Pt multilayer films10.1063/1.363124 ↗
12. Comparative study of Pd/B4C X-ray multilayer mirrors fabricated by magnetron sputtering with Kr and Ar gas10.3390/ma13204504 ↗
13. Energetic particle bombardment of films during magnetron sputtering10.1116/1.576223 ↗
14. Experimentally unraveling the energy flux originating from a DC magnetron sputtering source10.1016/j.tsf.2018.10.021 ↗
15. Effect of energetic bombardment on the magnetic coercivity of sputtered Pt/Co thin‐film multilayers10.1063/1.102912 ↗
16. Discharge voltage measurements during magnetron sputtering10.1016/j.surfcoat.2005.02.166 ↗
17. Backscattering and sputtering with the monte-carlo program TRIM.SP10.1080/10420159408219787 ↗
18. The importance of discharge voltage in DC magnetron sputtering for energy of sputtered and backscattered atoms on the substrate: monte-Carlo simulations10.1016/j.vacuum.2021.110716 ↗
19. IMD—software for modeling the optical properties of multilayer films10.1063/1.168689 ↗
20. GenX : an extensible X-ray reflectivity refinement program utilizing differential evolution10.1107/S0021889807045086 ↗
21. Influence of FeCo layer thickness on the interfacial asymmetry of FeCo/Si multilayers fabricated by direct current magnetron sputtering10.1364/AO.473881 ↗