Study of antioxidation behavior of ultra-thin films for Ce metal surface protection with atomic layer deposition upon air exposure
Source abstract
Abstract
Cerium (Ce) is an easily oxidized metal and the surface oxide layer will break into powders in a few days in air, which is extremely similar to actinide metals like thorium, uranium. To protect the surface of Ce, different ultra-thin films including Al2O3, TiO2, TiN and ZrO2 were deposited on the surface of Ce samples using atomic layer deposition (ALD). All these films decreased the Ce surface oxidation for one month. The Al2O3 film grown by ALD provided best antioxidation effect for 70 days of air exposure. This work shows the potential of ALD in the application of surface antioxidation for actinide metals in the aspect of short time (one month) storage.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Semiconductor materials and devices · Nuclear Materials and Properties · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. The reaction between uranium and oxygen10.1021/ja01124a505 ↗
2. Surface and corrosion chemistry of PLUTONIUM
3. Plutonium oxide systems and related corrosion products10.1557/mrs2001.179 ↗
4. J.C. Marra, Cerium as a Surrogate in the Plutonium Immobilization Waste Form, Environmental Issues and Waste Management Technologies in the Ceramic and Nuclear Industries VII, The American Ceramic Society2002, pp. 381-388.10.1002/9781118371435.ch36 ↗
5. The reaction of cerium with oxygen10.1021/ja01125a018 ↗
6. The high temperature oxidation of plutonium‐3.3 a/o gallium10.1149/1.2133326 ↗
7. Kinetics and mechanism of the oxidation of cerium in air at ambient temperature10.1016/j.corsci.2016.04.025 ↗
8. A review of the corrosion and pyrophoricity behavior of uranium and plutonium
9. Preparation of uranium for electroplating with nickel10.1080/00202967.1969.11870077 ↗
10. Study of behaviors of aluminum overlayers deposited on uranium via AES, EELS, and XPS10.1016/j.apsusc.2012.12.164 ↗
11. Influence of impurity elements on the corrosion of α-uranium surface: a density functional theory study10.1007/s10967-018-5842-0 ↗
12. Enhanced corrosion protection of copper in salt environments with nanolaminate ceramic coatings deposited by atomic layer deposition10.1149/08513.0683ecst ↗
13. Antioxidation protection for Ce metal by atomic layer deposition upon air exposure10.1116/6.0000223 ↗
14. Phase transformations in uranium, plutonium, and neptunium10.1007/BF02644575 ↗
15. Mechanical behavior of ultrathin sputter deposited porous amorphous Al2O3 films10.1016/j.actamat.2016.11.037 ↗
16. Failure mechanism of thin Al2O3 coatings grown by atomic layer deposition for corrosion protection of carbon steel10.1016/j.electacta.2011.07.104 ↗
17. Chemical and mechanical characterization of TiO2/Al2O3 atomic layer depositions on AISI 316 L stainless steel10.1016/j.surfcoat.2011.08.026 ↗
18. Electrochemical and surface analysis of the corrosion protection of copper by nanometer-thick alumina coatings prepared by atomic layer deposition10.1149/2.0081508jes ↗
19. Interfacial native oxide effects on the corrosion protection of copper coated with ALD alumina10.1016/j.electacta.2016.02.014 ↗
20. Plasma and thermal ALD of Al2O3 in a commercial 200 mm ALD reactor10.1149/1.2737629 ↗
21. Surface chemistry of atomic layer deposition: a case study for the trimethylaluminum/water process10.1063/1.1940727 ↗
22. Ultrathin sputtered silver films protected by ALD alumina: comparison of in-situ investigation with ex-situ resistance and ellipsometric measurements10.1016/j.vacuum.2021.110669 ↗
23. Passivation performance improvement of ultrathin ALD-Al2O3 film by chemical oxidation10.1016/j.vacuum.2017.12.026 ↗
24. Al2O3 and TiO2 atomic layer deposition on copper for water corrosion resistance10.1021/am2009579 ↗
25. Corrosion protection of copper using Al2O3, TiO2, ZnO, HfO2, and ZrO2 atomic layer deposition10.1021/acsami.6b13571 ↗
26. Reliable determination of chemical state in x-ray photoelectron spectroscopy based on sample-work-function referencing to adventitious carbon: resolving the myth of apparent constant binding energy of the C 1s peak10.1016/j.apsusc.2018.04.226 ↗
27. Characterization of Al2O3 films deposited by various methods10.1016/0040-6090(86)90308-1 ↗
28. Kashiwaya · 2018
29. Growth mechanism of TiN film on dielectric films and the effects on the work function10.1016/j.tsf.2004.11.239 ↗
30. The growth of ultrathin films of copper on polycrystalline ZrO210.1016/S0039-6028(00)00326-5 ↗
31. Ce 3d XPS investigation of cerium oxides and mixed cerium oxide (CexTiyOz), Surface and Interface Analysis
32. X-ray photoelectron study of the reaction of oxygen with cerium10.1016/0368-2048(80)85034-1 ↗
33. Mechanical and tribological properties of multilayered PVD TiN/CrN, TiN/Mon, TiN/NbN and TiN/TaN coatings on cemented carbide10.1016/S0257-8972(98)00544-1 ↗
34. Effect of NH3 flow on electrical and mechanical properties of ALD TiN thin films10.1016/j.matlet.2021.129554 ↗
35. A complete and self-consistent evaluation of XPS spectra of TiN10.1016/j.elspec.2012.10.011 ↗
36. Corrosion resistance and mechanism of CeN, TiN and CeN/TiN bilayer composite film deposited by dual ion beam sputtering10.1016/j.surfcoat.2017.12.033 ↗