journal article·2021-02

Promoted plasma generation for laser-driven flyer by MgAl hydride films

Liang Wang, Yichao Yan, Mengting Ai, Wanli Zhang, Hongchuan Jiang, Wenzhi Qin, Yao Wang, Long Zhang, Duo Tang

Vacuum· Volume 184
Publisher page

Abstract

Abstract MgAl hydride films with different hydrogen contents were fabricated in Ar and H2 mixed atmosphere using magnetron sputtering. Neutron reflectometry was performed to measure hydrogen contents, which indicated that up to 11atom% hydrogen was absorbed into MgAl. The MgAl hydride films were irradiated using pulsed lasers and the electron temperature and density of the generated plasma was measured. Results showed the electron temperature and density at delay time of 1μs were 7330 K, 7.9 × 1015 cm−3 and 8044 K, 9.0 × 1015 cm−3 for MgAl hydride films with 5atom% and 11atom% hydrogen, respectively. For comparison, the electron temperature and density for pure MgAl film were 5634 K and 6.9 × 1015 cm−3. Obviously, the electron temperature and density increases with the hydrogen content. Subsequently, the conversion ratio of the shock wave energy to the incident pulse energy were analyzed by investigating plasma induced shock wave evolution. The conversion ratio for MgAl hydride films with 5atom% and 11atom% hydrogen was 19.2% and 28.6%, which was 1.2 and 1.8 times of that for the MgAl film. Therefore, the MgAl hydride film promised to be a new class of material capable of promoting the plasma generation of the laser-driven flyers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Laser-induced spectroscopy and plasma · Atomic and Molecular Physics · Astro and Planetary Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. The production and study of laser-driven flyer plates
2. Simplified laser-driven flyer plates for shock compression science10.1063/1.4754717 ↗
3. A laser-accelerated flyer system10.1016/j.ijimpeng.2003.09.027 ↗
4. Optimisation of modulation period of TiO2/Al reactive multilayer films for laser-driven flyer plates10.1016/j.cej.2018.10.175 ↗
5. Laser ablation efficiency of metal samples with UV laser nanosecond pulses10.1016/S0169-4332(98)00495-4 ↗
6. Optimisation of laser-driven flyer velocity using photonic Doppler velocimetry10.1117/12.826246 ↗
7. Improving laser-driven flyer efficiency with high absorptance layers10.1063/1.3686282 ↗
8. Improving the energy conversion efficiency of a laser-driven flyer by an in-situ fabricated nano-absorption layer10.1186/s11671-020-03346-5 ↗
9. Efficiency relationship between initiation of HNS-IV and nanosecond pulsed laser-driven flyer plates of layered structure10.1017/S0263034617000854 ↗
10. Study of nanosecond laser ablation on aluminum and stainless steel targets
11. Experiment research on plasma plume expansion induced by nanosecond laser ablation Al
12. Laser ablation expansion plume performance experiments with typical material of orbital debris
13. Preparation and characteristics of laser-driven energetic composite flyer
14. Characteristics of the energetic microinitiator through integrating Al/Ni nanomultilayers with Cu film bridge10.1186/s11671-016-1812-z ↗
15. Investigation of electrically heated exploding foils in reactive Al/Ni multilayer10.1002/prep.201700305 ↗
16. Energetic Al/Ni superlattice as a micro-plasma generator with superb performances10.1186/s11671-018-2795-8 ↗
17. Reactive B/Ti nano-multilayers with superior performance in plasma generation10.1021/acsami.8b08120 ↗
18. High strength metallurgical graphene for hydrogen storage nanocomposites10.1016/j.vacuum.2016.04.017 ↗
19. Hydrogen storage: the major technological barrier to the development of hydrogen fuel cell cars10.1016/j.vacuum.2006.03.030 ↗
20. Release of chemical energy by combustion in a supersonic mixing layer of hydrogen and air10.1016/S0010-2180(02)00371-1 ↗
21. Hydrogen storage in mg: a most promising material10.1016/j.ijhydene.2009.08.088 ↗
22. MgAl alloy synthesis, characterization and its use in hydrogen storage10.1016/j.ijhydene.2009.09.073 ↗
23. Hydrogen absorption/desorption performance of MgAl alloys synthesized by reactive mechanical milling and hydrogen pulverization10.1016/j.jallcom.2016.04.236 ↗
24. Hydrogen storage properties of mg-based mixtures elaborated by reactive mechanical grinding10.1023/B:JMSC.0000039219.04507.6f ↗
25. Complete desorption of interlayer hydrogen phosphate in mg/al-layered double hydroxides by means of anion exchange with 1-octanesulfonate10.1007/s10853-011-5960-3 ↗
26. Measurement of electron density and temperature of a laser-induced zinc plasma10.1088/0022-3727/39/7/008 ↗
27. A comparison of single and double pulse laser-induced breakdown spectroscopy of aluminum samples10.1016/S0584-8547(02)00058-7 ↗
28. Local thermodynamic equilibrium in laser-induced breakdown spectroscopy: beyond the McWhirter criterion10.1016/j.sab.2009.11.005 ↗
29. Time-resolved dynamics of nanosecond laser-induced phase explosion10.1088/0022-3727/42/15/155503 ↗
30. Experimental and computational investigation of confined laser-induced breakdown spectroscopy10.1016/j.sab.2016.10.015 ↗
31. Temporal evolution of the shock wave and hot core air in laser induced plasma10.1063/1.1324986 ↗
32. Pressure effect in a shock-wave-plasma interaction induced by a focused laser pulse10.1103/PhysRevLett.97.205004 ↗
33. Estimating the pressure of laser-induced plasma shockwave by stimulated Raman shift of lattice translational modes
34. In-situ optical emission spectroscopy of laser-induced vanadium oxide plasma in vacuum10.1016/j.vacuum.2012.04.029 ↗