Layered structure enhances the hardness of Cu-48at.%Cr film prepared by co-sputtering deposition technique
Source abstract
Abstract
Abstract The Cu-48at.%Cr film was prepared by magnetron co-sputtering deposition technique with working pressure from 0.2 Pa to 1.5 Pa. The microstructure and nanoindentation hardness were investigated. When the working pressure decreased to 0.2 Pa, the consecutive layered structure formed. The formation of layered structure was attributed to the diffusion barrier ability of Cr element and the uphill diffusion of Cu atoms. While at higher working pressure, the sputtering particles energy near the substrate was not enough to promote the Cu diffusion. Therefore, the layered structure became indistinct as the working pressure increased. Owing to the interface strengthen, this layered structure made the nanoindentation hardness increase markedly from 4.2 GPa to 9.3 GPa as the working pressure decreased from 1.5 Pa to 0.2 Pa. This study could provide a good basis for preparing the film with specific microstructure in Cu–Cr system, even in other immiscible systems.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Stability, phase separation and oxidation of a supersaturated nanocrystalline Cu-33 at.% Cr thin film alloy10.1016/j.tsf.2016.12.048 ↗
2. Self-assembled binary immiscible Cu-transition metal multilayers prepared by co-sputtering deposition10.1016/j.tsf.2020.138037 ↗
3. Thermal stability of immiscible Cu-Ag/Fe triphase multilayers with triple junctions10.1016/j.actamat.2021.116679 ↗
4. Nanostructure and mechanical behavior of metastable Cu-Cr thin films grown by molecular beam epitaxy10.1016/j.actamat.2014.10.013 ↗
5. Correlation between structure and electrical resistivity of W-Cu thin films prepared by GLAD co-sputtering10.1016/j.surfcoat.2017.01.039 ↗
6. Oxidation behavior of Cu-Cr environmental barrier coatings on Cu-8Cr-4Nb10.1016/j.surfcoat.2005.01.116 ↗
7. Structure, mechanical properties and thermal stability of CrAlNbN/TiN multilayers10.1016/j.vacuum.2021.110182 ↗
8. Mechanical properties, thermal stability and oxidation resistance of TiN/CrN multilayer coatings10.1016/j.vacuum.2020.109468 ↗
9. Deposition behavior and characteristics of cold-Sprayed Cu-Cr composite deposits10.1007/s11666-012-9755-0 ↗
10. Phase formation and thermodynamics of unstable Cu-Cr alloys10.1557/JMR.1997.0201 ↗
11. Tuning the microstructure and mechanical properties of magnetron sputtered Cu-Cr thin films: the optimal Cr addition10.1016/j.actamat.2018.03.044 ↗
12. Handbook of thin-Film deposition processes and techniques, microelectron
13. A structure zone diagram including plasma-based deposition and ion etching10.1016/j.tsf.2009.10.145 ↗
14. Microstructural evolution during film growth
15. The microstructure of sputter-deposited coatings10.1116/1.573628 ↗
16. Fundamental structure forming phenomena of polycrystalline films and the structure zone models10.1016/S0040-6090(97)00503-8 ↗
17. Abnormal hardness behavior of Cu-Ta films prepared by magnetron sputtering10.1016/j.jallcom.2017.03.106 ↗
18. Characterization of mechanical properties and adhesion of Ta-Zr-Cu-Al-Ag thin film metallic glasses10.1016/j.surfcoat.2012.03.087 ↗
19. Microhardness properties of Cu-W amorphous thin films10.1023/A:1013201817300 ↗
20. Development and characterization of confocal sputtered piezoelectric zinc oxide thin film10.1016/j.vacuum.2020.109930 ↗
21. Orientation effects in nanoindentation of single crystal copper10.1016/j.ijplas.2008.02.009 ↗
22. A constitutive model for metal plastic deformation at micro/meso scale with consideration of grain orientation and its evolution10.1016/j.ijmecsci.2017.11.046 ↗
23. Comparing small scale plasticity of copper-chromium nanolayered and alloyed thin films at elevated temperatures10.1016/j.actamat.2015.04.008 ↗
24. Length-scale-dependent deformation mechanisms in incoherent metallic multilayered composites10.1016/j.actamat.2005.06.025 ↗
25. Evaluating modulus and hardness enhancement in evaporated Cu/W multilayers10.1016/j.actamat.2006.07.043 ↗
26. Selective oxidation-induced strengthening of Zr/Nb nanoscale multilayers10.1016/j.actamat.2016.09.021 ↗
27. Structure and mechanical properties of Cu-X (X = Nb, Cr, Ni) nanolayered composites10.1016/S1359-6462(98)00196-1 ↗
28. Ultra-high strength and plasticity mediated by partial dislocations and defect networks: Part II: layer thickness effect10.1016/j.actamat.2020.116494 ↗
29. Nano-indentation of ion-irradiated nuclear structural materials: a review
30. Strain rate sensitivity of Cu/Ta multilayered films: comparison between grain boundary and heterophase interface10.1016/j.scriptamat.2015.08.031 ↗
31. Interaction between vacancies and interstitial solutes (C, N, and O) in α-Fe: from electronic structure to thermodynamics10.1103/PhysRevB.90.054112 ↗
32. Vacancy mechanism of high oxygen solubility and nucleation of stable oxygen-enriched clusters in Fe10.1103/PhysRevLett.99.225502 ↗
33. Equilibrium vacancy concentration driven by undetectable impurities10.1103/PhysRevLett.115.015501 ↗
34. Self-assembled metal nano-multilayered film prepared by co-sputtering method, Appl10.1016/j.apsusc.2017.11.049 ↗
35. Phase separation of a supersaturated nanocrystalline Cu-Co alloy and its influence on thermal stability10.1016/j.actamat.2015.05.053 ↗
36. Spinodal decomposition induced in a highly immiscible Ag-Mo system by ion irradiation10.1063/1.2201868 ↗
37. Discrete and continuous deformation during nanoindentation of thin films10.1016/S1359-6454(00)00009-4 ↗
38. Investigation of the mechanical properties of thin films by nanoindentation, considering the effects of thickness and different coating-substrate combinations10.1016/j.surfcoat.2004.03.037 ↗
39. Effects of the substrate on the determination of thin film mechanical properties by nanoindentation10.1016/S1359-6454(01)00328-7 ↗
40. Influence of residual stresses on the mechanical properties of evaporation10.1016/S0040-6090(00)00996-2 ↗
41. Mechanical characterization of reactively magnetron-sputtered TiN films10.1016/S0257-8972(03)00711-4 ↗
42. On dislocation storage and the mechnical response of fine scale microstructures10.1016/0956-7151(94)90030-2 ↗
43. A model for dislocation behavior during deformation of Al/Al3Sc (fcc/L12) metallic multilayers10.1016/S1359-6454(03)00127-7 ↗
44. Scaling of the ductility with yield strength in nanostructured Cu/Cr multilayer films10.1016/j.scriptamat.2010.03.024 ↗
45. Strengthening mechanisms in equiatomic ultrafine grained AlCoCrCuFeNi high-entropy alloy studied by micro- and nanoindentation methods10.1016/j.actamat.2016.11.046 ↗
46. A maximum in ductility and fracture toughness in nanostructured Cu/Cr multilayer films10.1016/j.scriptamat.2009.10.030 ↗
47. Effect of interstitial oxygen and nitrogen on incipient plasticity of NbTiZrHf high-entropy alloys10.1016/j.actamat.2020.08.065 ↗