journal article·2020-03

Research on performance of vacuum coupling radius seals of HL-2M divertor in operation

Yong Lu, Long Zhang, Lijun Cai, Wei Zhang, Wenyu Huang, Jian Liu, Yuxiang Liu, Zaixin Li

Vacuum· Volume 173
Publisher page

Abstract

Abstract HL-2M device is a new tokamak under construction. The baking temperature of the vacuum vessel and its in-vessel components is approximately 300 °C. The vacuum coupling radius seals (VCR) which are employed as the in-vessel sealing joints of the cooling circuits for HL-2M divertor are also as the vacuum boundary, their leak rate must be less than 10−9 Pa m3/s. To ensure the VCR sealing performance, the leak tightness tests on VCR are performed. This paper presents the effects of the gaskets material, the heating rate and the torque on the sealing performance of VCR. The results show that the 316L stainless steel as the gaskets materials of VCR gets the best performance for HL-2M divertor in operation. And the slower the heating rate is, the better the leak tightness is. The torque for VCR is at least 200 N m to satisfy its sealability during HL-2M divertor operation, especially baking.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fusion materials and technologies · Superconducting Materials and Applications · Magnetic confinement fusion research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (7)

Show source-provided references
1. The component development status of HL-2M tokamak10.1016/j.fusengdes.2015.06.106 ↗
2. Engineering design for the HL-2M tokamak components10.1016/j.fusengdes.2013.04.035 ↗
3. Progress of engineering design and analysis of HL-2M advanced divertor10.1016/j.fusengdes.2017.04.073 ↗
4. Thermal-hydraulic analysis of the HL-2M divertor using an homogeneous equilibrium model10.1088/2058-6272/aa7628 ↗
5. Leak tightness tests on actively cooled plasma facing components: lessons learned from Tore Supra experience and perspectives for the new fusion machines10.1016/j.fusengdes.2015.02.004 ↗
6. Development of bakeable seals for large noncircular ports on the Tokamak Fusion Test Reactor10.1116/1.570381 ↗
7. Experimental and analytical studies on mechanical behavior of knife-edge-type metal-seal flange for fusion vacuum sealing10.1116/1.579240 ↗