Cyclic oxidation of electrodeposited Ni-xAl-Y2O3 (x = 14.5 or 17.6 wt %) coatings at 900 °C
Source abstract
Abstract
Abstract Ni-xAl-Y 2 O 3 (x = 14.5 or 17.6 wt%) coatings were developed by vacuum annealing the electrodeposited Ni-Al-Y 2 O 3 composite coatings with dispersed Al and Y 2 O 3 microparticles in Ni matrix at 800 °C for 3 h. For comparison, pure Ni-xAl (x = 15 or 18 wt %) coatings were also produced in the same condition. The results indicated that all coatings consisted of γ′-Ni 3 Al+β-NiAl and the addition of Y 2 O 3 refined the grain of alloy coatings. Cyclic-oxidation at 900 °C showed that the alumina scale adhesion increased with the increase of Al content and Y 2 O 3 further improved the adhesion of alumina scale due to the beneficial effects of Y 2 O 3 reducing void formation at the scale/coating interface. Together with this, the produced Ni-Al coatings exhibited better cyclic oxidation than cast Ni 3 Al alloy and Ni-17.6Al-Y 2 O 3 coating even exhibited a comparable cyclic oxidation as cast β-NiAl alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Electrodeposition and Electroless Coatings · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. The effect of nanocrystallization on the selective oxidation and adhesion of Al2O3 scales10.1007/BF01668513 ↗
2. A study of Ni3Al on carbon steel surface via the SHS casting route10.1016/S0257-8972(98)00820-2 ↗
3. Emerging application of intermetallics10.1016/S0966-9795(00)00077-7 ↗
4. Inter-diffusion and oxidation behavior in electron-beam evaporated NiAl coatings10.1016/j.vacuum.2006.05.010 ↗
5. Microstructure and property analysis of DC magnetron sputtered NiAl-0.6Hf coatings10.1016/j.surfcoat.2005.07.087 ↗
6. Non-parabolic isothermal oxidation kinetics of low pressure plasma sprayed MCrAlY bond coat10.1016/j.apsusc.2017.02.123 ↗
7. X-ray diffraction characterization of electrodeposited Ni-Al composite coatings prepared at different current densities10.1016/j.jallcom.2014.03.063 ↗
8. Influences of Al particles on the microstructure and property of electrodeposited Ni-Al composite coatings10.1016/j.apsusc.2013.12.021 ↗
9. Synthesis and characterization of Ni-Al-Y2O3 composite coatings with different Y2O3 particle content10.1016/j.ceramint.2014.06.123 ↗
10. Effects of Co contents on the microstructures and properties of electrodeposited NiCo-Al composite coatings10.1016/j.apsusc.2014.10.159 ↗
11. Microstructure evolution and improved corrosion resistance of electrodeposited NiCo-Al composite coatings with different Al contents10.1016/j.jallcom.2017.11.335 ↗
12. Study on particle distribution, microstructure and corrosion behavior of Ni-Al composite coatings10.1002/maco.201005912 ↗
13. Electrodeposition mechanism of Ni-Al composite coating10.1016/S1003-6326(14)63459-2 ↗
14. Effect of electrodeposition conditions on properties of Ni-Al composite coatings10.1179/1743294414Y.0000000449 ↗
15. Characterization of coelectrodeposited Ni-Al composite coating10.1179/1743294414Y.0000000339 ↗
16. Effects of process parameters on microhardness of electrodeposited Ni-Al composite coating using Taguchi method10.4152/pea.pea.20150524 ↗
17. Microstructure, texture and tensile behavior of pulsed electrodeposited Ni-Al composites produced using organic additive-free sulfamate bath loaded with Al nanoparticles10.1016/j.matchar.2017.12.027 ↗
18. Preparation, corrosion, and wear resistance of Ni-Mo/Al composite coating reinforced with Al particles10.1016/j.matdes.2016.08.019 ↗
19. Electrodeposited Ni- Al particle composite coatings10.1016/S0040-6090(98)80004-7 ↗
20. Electrodeposited Ni-Al composite coatings with high Al content by sediment co-deposition10.1016/j.surfcoat.2004.03.029 ↗
21. Al particles size effect on the microstructure of the co-deposited Ni–Al composite coatings10.1016/j.tsf.2009.01.019 ↗
22. Production and microstructural characterization of Ni matrix composite electrodeposits containing either micro- or nanoparticles of Al10.1016/j.surfcoat.2016.11.082 ↗
23. R. Offoiach, M. Lekka, K. E. Johanns, L. Fedrizzi, Heat treatments hardening effect on Ni-Al composite electrodeposits, Surf. Eng., https://doi.org/10.1080/02670844.2018.1429704.10.1080/02670844.2018.1429704 ↗
24. Reactive oxide-dispersed Ni3Al intermetallic coatings by sediment co-deposition10.1016/j.intermet.2005.01.004 ↗
25. High temperature oxidation and corrosion behaviour of Ni/Ni-Co-Al composite coatings10.1016/j.apsusc.2012.09.115 ↗
26. Comparison in the oxidation and corrosion behavior of aluminum and alumina-reinforced Ni/Ni-Co alloy coatings10.1007/s11661-012-1452-6 ↗
27. Development and high temperature property evaluation of Ni-Co-Cr-Al composite electroforms10.1007/s11665-015-1477-2 ↗
28. Oxidation of a novel electrodeposited Ni-Al nanocomposite film at 1050°C10.1016/j.scriptamat.2004.03.014 ↗
29. Size effect of Al particles on the oxidation of electrodeposited Ni-Al composite coatings10.1007/s11085-005-6557-5 ↗
30. Cyclic oxidation of alumina-forming Ni-Al nanocomposites with and without CeO2 addition10.1016/j.scriptamat.2006.08.004 ↗
31. Reaction synthesis of Ni-Al-based particle composite coatings10.1007/s11661-001-0269-5 ↗
32. Ni-Al composite coatings: diffusion analysis and coating lifetime estimation10.1016/S1359-6454(01)00022-2 ↗
33. Effect of annealing treatment on cyclic-oxidation of electrodeposited Ni-Al nanocomposite10.1016/S1003-6326(11)60716-4 ↗
34. Effect of annealing treatment on the isothermal and cyclic oxidation behavior of an electrodeposited alumina-forming Ni-Al microcomposite
35. Oxidation of Ni-Al-based electrodeposited composite coatings Ⅰ: oxidation kinetics and morphology at 800°C10.1023/A:1013398830293 ↗
36. Oxidation of Ni-Al-based electrodeposited composite coatings (II): oxidation kinetics and morphology at 1000°C10.1023/A:1013350914363 ↗
37. Effect of Y2O3 on the microstructure and oxidation of γ-Ni+γ’-Ni3Al coatings transformed from electrodeposited Ni-Al films at 1000°C10.1016/S1003-6326(08)60052-7 ↗
38. Size effect of Al particles on the structure and oxidation of Ni/Ni3Al composites transformed from electrodeposited Ni-Al films10.1016/j.scriptamat.2006.11.016 ↗
39. Effect of annealing treatment on the oxidation of an electrodeposited alumina-forming Ni-Al nanocomposite10.1016/j.corsci.2008.08.030 ↗
40. Effect of CeO2 on the microstructure and isothermal oxidation of Ni-Al alloy coatings transformed from electrodeposited Ni-Al films at 800°C10.1016/j.vacuum.2009.04.037 ↗
41. High-temperature oxidation resistance of Ni-Al alloy films prepared by heating electrodeposited composite10.2320/jinstmet1952.57.2_182 ↗
42. Cyclic oxidation behavior of electrodeposited Ni3Al-CeO2 base coatings at 850°C10.1007/s11085-005-8531-7 ↗
43. Cyclic oxidation behaviour of electrodeposited Ni3Al-CeO2 base coatings at 1050°C10.1016/j.corsci.2007.05.002 ↗
44. Porosity-dependent cyclic-oxidation resistance at 850 °C of annealed Ni-Al-based coatings via electroplating10.1016/j.surfcoat.2008.02.015 ↗
45. A novel ultrafine-grained Ni3Al with increased cyclic oxidation resistance10.1016/j.corsci.2011.01.043 ↗
46. Cyclic oxidation of Y2O3-modified ultrafine-grained Ni3Al alloy coating at 900 °C10.1016/S1003-6326(11)61426-X ↗
47. Fabrication of an oxidation-resistant β-NiAl coating on γ-TiAl10.1016/j.surfcoat.2011.10.049 ↗
48. Formation of β-NiAl nanocomposite coating by electrodeposition and effect of cerium ion doping on its oxidation mechanism10.1016/j.ceramint.2017.05.010 ↗
49. On the reasons for the effects of dispersions of stable oxides and additions of reactive elements on the adhesion and growth-mechanisms of chromia and alumina scales-the “sulfur effect”10.1007/BF00656731 ↗
50. Oxidation behaviour of NiAl-(II): cavity formation beneath the oxide scale on NiAl of different stoichiometries10.1016/0010-938X(93)90271-H ↗
51. Morphologic investigation and growth of the alumina scale on magnetron-sputtered CoCrAl NCs with and without yttrium10.1016/S0010-938X(02)00250-0 ↗
52. Mechanical aspects of the rare-earth effect10.1007/BF00666914 ↗
53. Effect of yttrium coating on the oxidation behavior of Ni3Al10.1007/BF01046888 ↗
54. The oxidation behavior of oxide-dispersed β-NiAl: (I). short-term performance at 1200°C10.1023/A:1018894711276 ↗
55. Effect of La2O3 particles on the oxidation of electrodeposited nickel films10.1023/A:1018874707526 ↗
56. Spallation behavior of thermally grown nickel oxide on nickel10.1007/s11085-009-9139-0 ↗
57. Cyclic oxidation of an ultrafine-grained and CeO2-dispersed δ-Ni2Al3 coating10.1016/j.corsci.2009.10.034 ↗
58. A fundamental aspect of the growth process of alumina scale on a metal with dispersion of CeO2 nanoparticles10.1016/j.corsci.2011.02.014 ↗
59. Oxidation behavior of aluminide coatings on carbon steel with and without electrodeposited Ni-CeO2 film by low-temperature pack cementation10.1016/j.vacuum.2011.06.009 ↗
60. The stress and spalling behavior of the oxide scale formed on polycrystalline Ni3Al10.1016/1359-6454(96)00009-2 ↗
61. Application of fracture mechanics to failure of surface oxide scales10.1179/mst.1988.4.5.398 ↗
62. Experimental observations in support of the dynamic segregation theory to explain the reactive-element effect10.1007/BF01046818 ↗
63. Peg formation by short-circuits diffusion in Al2O3 scales containing oxide dispersions10.1149/1.2124044 ↗