Effect of reactive gas additives on surface morphology evolution of stainless steel substrate undergoing low energy Ar ion bombardment
Source abstract
Abstract
Abstract In many cases surface ion bombardment results in roughening of metal's and alloy's surfaces. In the present study, a phenomenon of surface roughening inhibition during the ion bombardment is presented. The phenomenon occurred during the plasma extracted ion sputter etching at normal incidence with 400 eV positive ions, when 1% of dried air was added into the plasma forming Ar gas. Two 18%Cr–10%Ni mechanically polished to about 2 nm average roughness (Ra) stainless steel test pieces were sputter etched with and without the air additive. The roughening was inhibited to Ra ≈ 4 nm, which was about 9.5 times lower than that of the sputtered without air additive (Ra ≈ 38 nm). The phenomenon is discussed in terms of chemisorption of active plasma species introduced by the air additive and competing roughening/smoothening mechanisms.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ion-surface interactions and analysis · Metal and Thin Film Mechanics · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Surface engineering with ion beams: from self-organized nanostructures to ultra-smooth surfaces10.1007/s00339-008-4516-0 ↗
2. Direct measurement of curvature dependent ion etching of Gan10.1063/1.2085313 ↗
3. Kinetics of ion-induced ripple formation on Cu(001) surfaces10.1103/PhysRevB.69.245413 ↗
4. Ion beam assisted smoothing of optical surfaces10.1007/s00339-003-2274-6 ↗
5. Ion beam assisted smoothing of optical surfaces10.1088/0953-8984/14/35/301 ↗
6. Large area smoothing of surfaces by ion bombardment: fundamentals and applications10.1088/0953-8984/21/22/224026 ↗
7. Theory of sputtering. I. Sputtering yield of amorphous and polycrystalline targets10.1103/PhysRev.184.383 ↗
8. Theory of ripple topography induced by ion bombardment10.1116/1.575561 ↗
9. Morphology of steel, titanium induced by ion beam bombardment comprehensive analysis, surface morphology of steel and titanium induced by ion beam bombardment – comprehensive analysis10.1016/j.vacuum.2009.01.065 ↗
10. Surfactant-driven self-organized surface patterns by ion beam erosion10.1088/1367-2630/13/1/013033 ↗
11. Mechanisms of cone formation by ion bombardment10.1016/0168-583X(84)90284-2 ↗
12. Investigation of insertion phenomena with needles treated by plasma etching10.1016/j.procir.2013.01.010 ↗
13. Behrisch · 2007
14. Effects of a controlled addition of nitrogen and oxygen to argon on the analytical parameters of glow discharge optical emission spectrometry10.1039/ja9940900375 ↗
15. Copper surface morphology developed in a magnetron sputtering system10.1007/BF01174503 ↗
16. Influence of the composition of the altered layer on the ripple formation10.1116/1.586529 ↗
17. Hollow-cathode low-pressure arc discharges and their application in plasma generators and charged-particle sources
18. Spontaneous pattern formation induced by ion bombardment of binary compounds10.1103/PhysRevLett.105.145501 ↗
19. Compositionally modulated ripples induced by sputtering of alloy surfaces10.1103/PhysRevLett.98.256101 ↗