journal article·2024-03

Adjusting Ag deposition power to improve corrosion resistance of ITO/Ag/ITO film for gate driver on array

Pingping Zhang, Zhiqiang Zhang, Xiang Yu, Lei Yang, Shuo Zhao, Rabah Boukherroub

Vacuum· Volume 221
Publisher page

Abstract

Gate Driver on Array (GOA) can fulfil narrow-frame full screen of display device, but may encounter through-hole burnout during operation due to electrochemical corrosion under high-temperature and high-humidity environments. Through-hole burnout originates from vapor that penetrates display sealant and invades signal-conducting through-hole in GOA, and results from action of electrochemistry and Joule heat. In this work, ITO/Ag/ITO films were deposited by direct current (DC) sputtering using ITO and Ag targets. This work attempts to reduce electrical resistivity, while limiting electrochemical corrosion of film by adjusting Ag deposition power. We found that high crystallinity and smooth morphology can inhibit vapor accumulation for Ag film prepared at a power of 8 kW, along with favorable sheet resistance and etching slope angle as low as 0.31 Ω/sq and 73.1°, respectively. Such film can run normally for 200 h in field test at a temperature of 85 °C and a humidity of 85 % with absence of through-hole corrosion. The outcomes of this work pave the way for industrial application of the narrow-frame full screen with virtues of both low resistance value and electrochemical corrosion resistance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Semiconductor materials and devices · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Heat treatment and ventilation optimization in a deep mine
2. Blasting injuries in surface mining with emphasis on flyrock and blast area security10.1016/j.jsr.2003.07.003 ↗
3. Research trends in mining accidents study: A systematic literature review
4. A comparison between fine-grained and nanocrystalline electrodeposited Cu-Ni films. Insights on mechanical and corrosion performance10.1016/j.surfcoat.2011.05.047 ↗
5. A study of degradation of indium tin oxide thin films on glass for display applications10.1016/j.mee.2012.08.002 ↗
6. Indium tin oxide (ITO) thin film gas sensor for detection of methanol at room temperature10.1016/S0925-4005(03)00524-0 ↗
7. Slot-die processing and encapsulation of non-fullerene based ITO-free organic solar cells and modules10.1088/2058-8585/ab556f ↗
8. Effect of different artificial aging protocols on marginal sealing ability of self-etch dental adhesives: micro-computed tomography evaluation10.1080/01694243.2019.1670581 ↗
9. Polyorganosiloxane-based heat-resistant sealant with improved dielectric characteristics10.1134/S1811238207030186 ↗
10. Comparison of corrosion properties of passive films formed on coarse grained and ultrafine grained AISI 2205 duplex stainless steels10.1016/j.jelechem.2015.09.036 ↗
11. Surface modification of PE/PET by two-step method with graphene and silver nanoparticles for enhanced electrical conductivity10.1177/1528083720985893 ↗
12. Enhanced tribocorrosion performance of Cr/GLC multilayered films for marine protective application10.1021/acsami.8b00628 ↗
13. Chromium films deposition by hot target high power pulsed magnetron sputtering: deposition conditions and film properties10.1016/j.surfcoat.2019.07.025 ↗
14. Integrating nanodiamonds to improve anticorrosion property and conductivity simultaneously of Ag composite films via layer by layer spin-spray deposition10.1016/j.apsusc.2019.144643 ↗
15. Multifunctional ZrB2-rich Zr1-xCrxBy thin films with enhanced mechanical, oxidation, and corrosion properties10.1016/j.vacuum.2020.109990 ↗
16. C 1s peak of adventitious carbon aligns to the vacuum level: dire consequences for material's bonding assignment by photoelectron spectroscopy10.1002/cphc.201700126 ↗
17. Reliable determination of chemical state in X-ray photoelectron spectroscopy based on sample-work-function referencing to adventitious carbon: resolving the myth of apparent constant binding energy of the C 1s peak10.1016/j.apsusc.2018.04.226 ↗
18. Work function control of transparent ITO/Ag/ITO multilayer using nano-sized Ag and Al top layer10.14723/tmrsj.40.401 ↗
19. Practical guide for curve fitting in X-ray photoelectron spectroscopy10.1116/6.0000377 ↗
20. Assessment of the frequency and nature of erroneous X-ray photoelectron spectroscopy analyses in the scientific literature10.1116/6.0000685 ↗
21. Controlling the opto-electronic properties of nc-SiOx: H films by promotion of <220> orientation in the growth of ultra-nanocrystallites at the grain boundary10.1016/j.apsusc.2017.09.180 ↗
22. Growth kinetics of individual Co particles Ex-solved on SrTi0.75Co0.25O3-δ polycrystalline perovskite thin films10.1021/jacs.9b01882 ↗
23. Grain growth-induced thermal property enhancement of NiTi shape memory alloys for elastocaloric refrigeration and thermal energy storage systems10.1016/j.ijheatmasstransfer.2020.119760 ↗
24. Enhanced electrochemical performance of CoAl-layered double hydroxide nanosheet arrays coated by platinum films10.1016/j.electacta.2013.10.029 ↗
25. Oxidation kinetics of overstoichiometric TiB2 thin films grown by DC magnetron sputtering10.1016/j.corsci.2022.110493 ↗
26. Retention mechanism and conductivity corrosion resistance performance of Ag doped GLC and TiN films for metal bipolar plates10.1016/j.vacuum.2022.111702 ↗
27. Thermal stabilization of nanocrystalline promoting conductive corrosion resistance of TiN-Ag films for metal bipolar plates10.1016/j.vacuum.2021.110631 ↗
28. Strong electronic oxide-support interaction over In2O3/ZrO2 for highly selective CO2 hydrogenation to methanol10.1021/jacs.0c07195 ↗
29. Piezoresistive failure behaviors and mechanisms of the ITO thin films at high temperatures
30. Experimental electronic structure of In2O3 and Ga2O310.1088/1367-2630/13/8/085014 ↗
31. Defect-induced tunable permittivity of epsilon-near-zero in indium tin oxide thin films10.3390/nano8110922 ↗
32. Realization of an atomically flat BaSnO3 (001) substrate with SnO2 termination10.1063/1.4997238 ↗
33. A facile one-pot reduction method for the preparation of a SnO/SnO2/GNS composite for high performance lithium ion batteries10.1039/C3DT52661E ↗
34. Effects of second-phase particles and elemental distributions of ITO targets on the properties of deposited ITO films10.1016/j.ceramint.2017.04.021 ↗
35. 12.42% monolithic 25.42 cm2 flexible organic solar cells enabled by an amorphous ITO-modified metal grid electrode10.1002/adma.202110276 ↗
36. Effects of RF power variation on properties of ZnO thin films and electrical properties of p-n homojunction10.1016/S0022-0248(03)01205-3 ↗
37. Improvement in the figure of merit of ITO-metal-ITO sandwiched films on poly substrate by high-power impulse magnetron sputtering10.3390/coatings11020144 ↗
38. Structural optical and electrical properties of a transparent conductive ITO/Al–Ag/ITO multilayer contact10.3762/bjnano.11.57 ↗
39. Annealing effects of In2O3 thin films on electrical properties and application in thin film transistors10.1016/j.tsf.2010.12.022 ↗
40. Integrin clustering matters: a review of biomaterials functionalized with multivalent integrin-binding ligands to improve cell adhesion, migration, differentiation, angiogenesis, and biomedical device integration
41. High luminescence efficiency in MoS2 grown by chemical vapor deposition10.1021/acsnano.6b03443 ↗
42. Fabrication of highly flexible, scalable, and high-performance supercapacitors using polyaniline/reduced graphene oxide film with enhanced electrical conductivity and crystallinity10.1002/adfm.201303282 ↗
43. Reversible defect engineering in graphene grain boundaries10.1038/s41467-019-09000-8 ↗
44. Superhydrophobic Al surfaces with properties of anticorrosion and reparability10.1021/acsomega.8b02631 ↗
45. Integrated high-Q crystalline AlN microresonators for broadband Kerr and Raman frequency combs10.1021/acsphotonics.7b01254 ↗
46. Repeated growth and bubbling transfer of graphene with millimetre-size single-crystal grains using platinum10.1038/ncomms1702 ↗
47. The oil spill and the use of chemical surfactant reduce microbial corrosion on API 5L steel buried in saline soil10.1007/s11356-021-12544-2 ↗
48. The pH-dependent corrosion behavior of ternary oxide semiconductors and common metals and its application for solution-processed oxide thin film transistors circuit integration10.1016/j.jallcom.2017.04.289 ↗
49. Adjusting indium-tin-oxide film thickness to improve electrochemical corrosion resistance of gate driver on array10.1016/j.tsf.2022.139209 ↗
50. Enhancement of pure titanium localized corrosion resistance by anodic oxidation10.1002/maco.201709815 ↗
51. Enhanced tribological, corrosion, and microstructural properties of an ultrathin (< 2 nm) silicon nitride/carbon bilayer overcoat for high density magnetic storage10.1021/am501760p ↗