journal article·2021-08

Elucidation of the thickness inside the niobium anodic oxide film and its effect on adhesion to polyimide film

Munenori Yoshida, Hiromi Yamanaka, Kenta Tomori, Sergei A. Kulinich, Syuuichi Maeda, Satoru Iwamori

Vacuum· Volume 190
Publisher page

Abstract

Abstract Niobium oxide films prepared via anodic oxidation are known to exhibit various colors. These colors are affected by the voltage during anodizing treatment to produce such thick film. The anodic oxidation reaction stops when the applied voltage reaches its saturation value. At this point the film stops growing, its thickness of the internal oxide layer being proportional to the applied voltage. Therefore, this study aims to clarify the relationship between the oxidation state inside the anodized film and its thickness. We also attempted to anodize a polyimide (PI) film, which is a flexible resin material. Because such a PI film is nonconductive, it was sputter-coated with an intermediate layer of niobium before anodization. To enable adhesion to the PI film, the Nb-sputtered film was subjected to surface modification via oxygen plasma treatment. Finally, the Nb-coated PI film was subjected to anodization. Detailed optical comparison was performed between the anodized Nb-coated PI substrate and anodized Nb plate substrate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Anodic Oxide Films and Nanostructures · Surface Modification and Superhydrophobicity · Smart Materials for Construction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Characteristics of colored passive layers on titanium: morphology, optical properties, and corrosion resistance10.1021/am506572m ↗
2. Optical and physical properties of cobalt oxide films electrogenerated in bicarbonate aqueous media10.1021/jp056689h ↗
3. Discovery of reversible switching of coloration of passive layers on titanium10.1021/cm703052p ↗
4. Anodic oxidation of tantalum in water and biological solutions using current limiting constant voltage method10.1007/s10853-006-1114-4 ↗
5. Tunable structural color of anodic tantalum oxide films10.1088/1674-1056/21/8/088101 ↗
6. Niobium films as rewritable imaging media
7. Kuroda · 2007
8. Enhanced coloration for hybrid niobium-based electrochromic devices10.1021/acsaem.8b00967 ↗
9. Modulation in single Bi3+-Doped yttrium–scandium–niobium vanadates for color tuning over the whole visible spectrum10.1021/acs.chemmater.6b00277 ↗
10. Low-temperature thermally annealed niobium oxide thin films as a minimally color changing ion storage layer in solution-processed polymer electrochromic devices10.1021/acsami.8b16154 ↗
11. Properties of ion-plated Nb2O5 films10.1016/0040-6090(89)90829-8 ↗
12. Effect of thickness on the structure, morphology and optical properties of sputter depositec Nb2O5 films10.1016/j.apsusc.2006.03.014 ↗
13. Stability and effect of annealing on the optical properties of plasma-deposited Ta2O5 and Nb2O5 films10.1016/j.tsf.2006.05.047 ↗
14. Temperature stability of sputtered niobium–oxide films10.1063/1.1458052 ↗
15. Atmospheric pressure chemical vapour deposition of thin films of Nb2O5 on glass10.1039/b307768n ↗
16. Electrochromic properties of niobium oxide thin films prepared by radio‐frequency magnetron sputtering method, Appl
17. Amorphous niobium oxide thin films10.1016/j.jnoncrysol.2010.09.073 ↗
18. Superhydrophobic surfaces and coatings by electrochemical anodic oxidation and plasma electrolytic oxidation10.1016/j.cis.2020.102245 ↗
19. Properties of ion-plated Nb2O5 films10.1016/0040-6090(89)90829-8 ↗
20. Color change mechanism of niobium oxide thin film with incidental light angle and applied voltage10.1016/j.tsf.2016.02.011 ↗
21. Ohring · 1995 · 18
22. Polymer electronic memories: materials, devices and mechanisms10.1016/j.progpolymsci.2008.08.001 ↗
23. Surface modification with special morphology for the metallization of polyimide film10.1016/j.apsusc.2019.05.016 ↗
24. Phosphinated polyimide hybrid films with reduced melt-flow and enhanced adhesion for flexible copper clad laminates10.1016/j.porgcoat.2018.04.037 ↗
25. A study of adhesive improvement of a Cr-Ni alloy layer on a polyimide surface by low pressure gas plasma modification10.1016/j.porgcoat.2013.06.009 ↗
26. Oxidation behavior of the B-modified silicide coating on Nb-Si based alloy at intermediate temperatures10.1016/j.surfcoat.2017.11.039 ↗
27. Adhesion of sputter-deposited Cu/Ti film on plasma-treated polymer substrate10.1016/j.tsf.2016.01.010 ↗
28. Adhesion of sputtered Cu films on polyimide films exposed with various ion species10.3131/jvsj.36.337 ↗
29. Atmospheric pressure plasmas for surface modification of flexible and printed electronic devices: a review10.1016/j.tsf.2015.05.035 ↗
30. X-ray photoelectron spectroscopy: towards reliable binding energy referencing10.1016/j.pmatsci.2019.100591 ↗
31. C 1s peak of adventitious carbon aligns to the vacuum level: dire consequences for material's bonding assignment by photoelectron spectroscopy10.1002/cphc.201700126 ↗
32. Compromising science by ignorant instrument calibration—need to revisit half a century of published XPS data10.1002/anie.201916000 ↗
33. Reliable determination of chemical state in x-ray photoelectron spectroscopy based on sample-work-function referencing to adventitious carbon: resolving the myth of apparent constant binding energy of the C 1s peak10.1016/j.apsusc.2018.04.226 ↗
34. Iwamori · Polyimides and Other High Temperature Polymers · 2003 · 2 · 407
35. Core electron binding energies in some Group IIIA, VB, and VIB compounds10.1021/ic50128a045 ↗
36. Deplacement Chimique esca dans la serie des oxydes du niobium10.1016/0368-2048(77)85032-9 ↗
37. Formation behavior and control factors of anodic films on niobium10.4139/sfj.54.447 ↗
38. Voltage and current control in anodic oxidation10.4139/sfj.68.260 ↗
39. Study of an environment-friendly surface pretreatment of ABS-polycarbonate surface for adhesion improvement10.1016/j.ijadhadh.2013.03.010 ↗
40. Effect of reactive oxygen species generated with ultraviolet lamp and plasma on polyimide surface modification10.1002/sia.6279 ↗
41. High-performance polyimide filaments and composites improved by O2 plasma treatment10.3390/polym10070695 ↗
42. Combined ToF‐SIMS/XPS study of plasma modification and metallization of polyimide10.1002/(SICI)1096-9918(199907)27:7<609::AID-SIA523>3.0.CO;2-# ↗
43. Improvement in the adhesion between copper metal and polyimide substrate by plasma polymer deposition of cyano compounds onto polyimide10.1163/156856196X00373 ↗
44. Effects of sputtering on the surface composition of niobium oxides10.1116/1.570717 ↗