Vacuum hot pressed AZ31/UCF/AZ31 composite sheets: Microstructure and mechanical properties
Source abstract
Abstract
Abstract AZ31 Mg alloy/unidirectional carbon fiber (UCF)/AZ31 composite sheets were fabricated with AZ91 Mg alloy powder as an adhesive using vacuum hot pressing (VHP) at various temperatures. Both the wettability and bonding strength of the UCF/AZ91 interfaces increased with increasing VHP temperature, resulting in an improvement of the mechanical properties of the composite sheets. The fracture mechanism of the composite sheets at low VHP temperature (500 °C) was the pullout of UCFs and delamination. In contrast, at 560 °C, partial debonding between the UCFs and AZ91 was the dominant failure mechanism, and an S-type fracture path surrounding the UCFs was observed. The bonding strength of the UCF/AZ91 interface was weaker than that of the AZ91/AZ31 interface for this composite. The sheet prepared at 585 °C exhibited the largest ultimate tensile strength of 252 MPa and an elongation of 13.2%. This behavior was attributed to the enhancement of the interfacial bonding strength due to the formation of Al 4 C 3 and MgAl 2 C 2 phases at the UCF/AZ91 interface. The hardness and modulus reached maximum values of 9.9 and 61 GPa, respectively, near the UCF/AZ91 interface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Metal matrix composites-from science to technological significance10.1016/j.compscitech.2005.05.027 ↗
2. Interfacial microstructure and tensile properties of carbon fiber reinforced Mg-Al-RE matrix composites10.1016/j.jallcom.2015.12.165 ↗
3. Review of recent studies in magnesium matrix composites10.1023/B:JMSC.0000043583.47148.31 ↗
4. Interfacial microstructure and improved wetting mechanism of SiO2f/SiO2 brazed with Nb by plasma treatment10.1016/j.vacuum.2017.06.041 ↗
5. Cathode spot movement on a continuous carbon fiber reinforced Cu matrix composite in vacuum10.1016/j.vacuum.2013.01.004 ↗
6. Moisture effect on SiCp/6061 Al MMC: dissolution of interfacial Al4C310.1016/S1359-6462(97)00133-4 ↗
7. The chemical behaviour of carbon fibres in magnesium base Mg–Al alloys10.1023/A:1004745006226 ↗
8. Fabrication of carbon fibre reinforced aluminum matrix composites via a titanium-ion containing flux10.1016/j.compositesa.2012.08.021 ↗
9. Evolution of interfacial nanostructures and stress states in Mg matrix composites reinforced with coated continuous carbon fibers10.1016/j.compscitech.2011.10.008 ↗
10. Effect of copper electroless coatings on the interaction between a molten Al–Si–Mg alloy and coated short carbon fibers10.1016/j.compositesa.2007.02.005 ↗
11. A study of silica coating on the surface of carbon fiber or graphite fiber and the interface in carbon/magnesium composite10.1016/0266-3538(93)90067-Q ↗
12. Effect of Gd content on interfacial microstructures and mechanical properties of Cf/Mg composite10.1016/j.matdes.2014.09.045 ↗
13. Effect of Y addition on the interfacial microstructures and mechanical Properties of Cf/Mg composites10.1016/j.msea.2014.06.066 ↗
14. Interface engineering of carbon-fiber reinforced Mg-Al alloys10.1002/1527-2648(200008)2:8<471::AID-ADEM471>3.0.CO;2-S ↗
15. Comparison of sizing effect of T700 grade carbon fiber on interfacial properties of fiber/BMI and fiber/epoxy10.1016/j.apsusc.2012.09.054 ↗
16. Using hybrid reinforcement methodology to enhance overall mechanical performance of pure magnesium10.1007/s10853-005-2429-2 ↗
17. Cong, Tensile strength, oxidation resistance and wettability of carbon fibers coated with a TiC layer using a molten salt method10.1016/j.matdes.2013.02.084 ↗
18. Matrix cracks around fibre breaks and their effect on stress redistribution and failure development in unidirectional composites10.1016/j.compscitech.2015.01.002 ↗
19. Effect of temperature and strain rate on the tensile properties related to hot cracking of Csf/AZ91D composites10.1016/j.msea.2013.12.056 ↗
20. Fabrication of continuous carbon fiber-reinforced aluminum–magnesium alloy composite wires using ultrasonic infiltration method10.1016/j.compositesa.2007.03.007 ↗
21. Fabrication and mechanical properties of Cu-coatedwoven carbon fibers reinforced aluminum alloy composite10.1016/j.matdes.2013.12.064 ↗
22. The effect of applied pressure on fracture surface and tensile properties of nickel coated continuous carbon fiber reinforced aluminum composites fabricated by squeeze casting10.1016/j.matdes.2009.11.067 ↗
23. Microstructure and mechanical properties of graphite fiber-reinforced high-purity aluminum matrix composite10.1007/s10853-009-3639-9 ↗
24. Morphology of second-phase precipitates in carbon-fiber- and graphite-fiber-reinforced magnesium-based metal-matrix composites10.1016/S0266-3538(97)00020-1 ↗
25. The crystal structure of magnesium dicarbide10.1016/S0925-8388(98)00828-7 ↗
26. Interface formation in carbon fibre reinforced magnesium alloys (AZ91)10.1007/BF00592149 ↗
27. Fabrication of a new Mg-50%Al4C3-6%Ce master alloy and its refinement mechanism on AZ91D alloy10.1016/S1875-5372(13)60032-6 ↗