Surface roughness realized and evaluated in different dimensional range and its effect on field emission behavior
Source abstract
Abstract
Abstract The effect of the surface roughness in different dimensional range on the field emission behavior of Cu Cr electrodes is studied. Hawking machining and finish machining are used to achieve the different surface conditions. The macroscopic surface roughness value of the hawking machining, measured by the conventional roughness meter, is one order of magnitude lower than that of the finishing machining. However, the obvious increase of field emission tendency was found on the electrode surface obtained by the hawking machining compared with the finishing machining. The surface roughness in nanoscale was evaluated by AFM (Atomic Force Microscope), indicating that the micro-roughness of the hawking machining is higher than that of the finishing machining. These results indicated the deficiency of the conventional roughness evaluation method on the field emission tendency and suggested that hawking machining might not improve endurance voltage strength of the electrodes in vacuum.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Force Microscopy Techniques and Applications · Surface and Thin Film Phenomena · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Conduction and breakdown in high vacuum
2. Farral1 · 1985 · 815
3. Relationship between field emission current characteristic and electrical breakdown in vacuum
4. Effect of Natural Surface Roughness on Electron Emission from Metal in Electric Field
5. Lafferty · 1980
6. Pre-breakdown characteristics between electrodes in vacuum
7. Fowler · Proc. R. Soc. Lond. Ser. A · 1928 · 119 · 17310.1098/rspa.1928.0091 ↗
8. Field emission from a composite of graphene sheets and ZnO nanowires10.1021/jp900881q ↗
9. The use of a new potential barrier model in the Fowler-Nordheim theory of field emission10.1016/0039-6028(65)90020-8 ↗
10. Electrical breakdown in vacuum
11. Meifang · 2006
12. Jin · 2013
13. Tasuku Higashino and Tadatomo Suga, Finite element analysis of the effect of surface roughness on nanometer-scale contact, IEEE Polytronic 2007 Conference, 209–212.10.1109/POLYTR.2007.4339169 ↗
14. The processing technology of hawking machining was studied
15. Mechanical deformation and properties of CuCr25 alloy
16. Influence of the field emission on the electrical breakdown in vacuum
17. Optimal burn-in and warranty for a product with post-warranty failure penalty10.1007/s00170-013-5055-1 ↗
18. Analysis of surface roughness and contact pressure at copper connector using nickel and silver plating for EV battery
19. Discussing the effects of contact surface coarseness on contact resistance
20. Investigation on the friction sensitivity of a matchhead composition influenced by the surface roughness of contact materials, propellants explos10.1002/prep.201100159 ↗
21. Sation · Surf. Sci. · 1977 · 66 · 34610.1016/0039-6028(77)90415-0 ↗
22. The stability of the field emission current
23. Effect of the local morphology in the field emission properties of conducting polymer surfaces
24. On wetting behavior of fluorocarbon coatings with various chemical and roughness characteristics10.1016/j.vacuum.2005.04.004 ↗
25. Enhancement of field emission and hydrophobic properties of silicon nanowires by chemical vapor deposited carbon nanoflakes coating10.1016/j.apsusc.2012.07.148 ↗
26. Effects of plasma treatment on microstructure and electron field emission properties of screen-printed carbon nanotube films10.1016/j.physe.2006.07.034 ↗
27. Influence of contact geometry on hardness behavior in nano-indentation10.1016/j.vacuum.2009.07.001 ↗
28. Some physical properties of a Si-doped nano-crystalline GaAs thin film grown by thermionic vacuum arc
29. Rodekohr · 2010
30. Rong-Shiuan Chu, Yang Zhao and Costas P. Grigoropoulo, Effect of copper surface roughness on thermal conductance of copper/carbon nanotube array interface, 13th IEEE ITHERM Conf., 2012: 10–14.10.1109/ITHERM.2012.6231407 ↗