A novel thermal probe design for the measurement of energy influx in RF remote plasma
Source abstract
Abstract
Abstract A novel design of a thermal probe to measure the energy influx of RF plasma has been achieved. This probe utilises one-dimensional steady-state conduction through the probe's cylindrical body and has the ability of controlling its exposed surface's temperature. The probe is fully instrumented so that the temperature field within it is known. This temperature field will serve as an indicator of achieving steady-state conduction as well as securing the needed data to calculate the energy influx of the RF plasma. Experimental results show that the plasma energy influx varied from 0.3 kW/m² to 2.2 kW/m² for RF power ranging from 15 W to 300 W, respectively. The variation of the energy influx with the RF power was found to follow a linear profile and a simple relation is proposed to model this variation for the considered plasma. Error analysis has been carried out to estimate the experimental uncertainties in the resulting energy influx values. The resulting uncertainties are found to be within the acceptable range for such applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Plasma Diagnostics and Applications · Electrostatic Discharge in Electronics · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. The energy balance at substrate surfaces during plasma processing10.1016/S0042-207X(01)00350-5 ↗
2. Etching rate characterization of SiO2 and Si using ion energy flux and atomic fluorine density in a CF4/O2/Ar electron cyclotron resonance plasma10.1116/1.578540 ↗
3. Comparison of calorimetric plasma diagnostics in a plasma downstream reactor10.1088/0022-3727/44/9/095201 ↗
4. Substrate heating in cylindrical magnetron sputtering sources10.1016/0040-6090(78)90273-0 ↗
5. Energy influx from an rf plasma to a substrate during plasma processing10.1063/1.372393 ↗
6. Measurement of energy transfer at an isolated substrate in a pulsed dc magnetron discharge10.1063/1.2779287 ↗
7. Thermal power at a substrate during ZnO: Al thin film deposition in a planar magnetron sputtering system10.1063/1.366092 ↗
8. Parietal heat flux measurement in a nitrogen plasma jet10.1088/0957-0233/3/1/008 ↗
9. Angular-resolved energy flux measurements of a dc- and HIPIMS-powered rotating cylindrical magnetron in reactive and non-reactive atmosphere10.1088/0022-3727/44/11/115201 ↗
10. Energy transfer into the growing film during sputter deposition: an investigation by calorimetric measurements and Monte Carlo simulations10.1116/1.581957 ↗
11. Calorimetric measurements with a heat flux transducer of the total power influx onto a substrate during magnetron sputtering10.1016/S0257-8972(99)00125-5 ↗
12. Improvement of thermal probe method for the plasma diagnostics10.1016/j.tsf.2005.08.117 ↗
13. Principle and application of a thermal probe to reactive plasmas10.1063/1.1473688 ↗
14. Heating of polymer substrate by discharge plasma in radiofrequency magnetron sputtering deposition10.1016/j.tsf.2006.03.059 ↗
15. Application of a temperature gradient type thermal probe to the discharge plasma10.1143/JJAP.49.08JD03 ↗
16. Wafer-grown heat flux sensor arrays for plasma etch processes10.1109/TSM.2004.840526 ↗
17. On the measurement of energy fluxes in plasmas using a calorimetric probe and a thermopile sensor10.1088/0022-3727/43/46/465201 ↗
18. The energy influx during plasma deposition of amorphous hydrogenated carbon films10.1016/S0257-8972(01)01497-9 ↗
19. Characterization of a broad ion beam source by determination of the energy flux
20. Diamond-like carbon film deposition by a 13.56 MHz hollow cathode RF–RF system using different precursor gases10.1016/S0257-8972(01)01104-5 ↗
21. Properties of thin films deposited from HMDSO/O2 induced remote plasma: effect of oxygen fraction10.1016/j.vacuum.2007.10.009 ↗
22. Diagnostic study of low-pressure Ar-O2 remote plasma generated in HCD-L 300 system: relative density of O atom10.1016/j.vacuum.2007.04.031 ↗
23. Diagnostic and processing in SF6 RF remote plasma for silicon etching10.1088/0022-3727/42/17/175206 ↗
24. Visible photoluminescence from plasma-polymerized-organosilicone thin films deposited from HMDSO/O2 induced remote plasma: effect of oxygen fraction10.1088/0022-3727/41/17/175206 ↗
25. Atomic oxygen in remote plasma of radio-frequency hollow cathode discharge source: characterization and efficiency10.1016/j.vacuum.2010.08.004 ↗
26. Structural, optical and electrical properties of plasma deposited thin films from hexamethyldisilazane compound10.12693/APhysPolA.119.369 ↗
27. Incropera · 2006
28. Optical constants of silicone-like (Si:Ox:Cy:Hz) thin films deposited on quartz using hexamethyldisiloxane in a remote RF hollow cathode discharge plasma10.1016/j.vacuum.2007.03.007 ↗
29. Taylor · 1997